LDKVCVER1937

FCC ID

Equipment: Cisco Catalyst 9120AX Series Wi-Fi 6 Access Points

Cisco Systems Inc VCVER1937

125 West Tasman Drive, San Jose, CA 95134-1706 United States

Application
Frequency Range
Final Action Date
Granted
CHF7iJyzKGcfxENyx2aPGw==
5180.0-5240.0
2019-06-07
APPROVED
CHF7iJyzKGcfxENyx2aPGw==
5190.0-5230.0
2019-06-07
APPROVED
CHF7iJyzKGcfxENyx2aPGw==
5260.0-5320.0
2019-06-07
APPROVED
CHF7iJyzKGcfxENyx2aPGw==
5500.0-5720.0
2019-06-07
APPROVED
CHF7iJyzKGcfxENyx2aPGw==
5510.0-5710.0
2019-06-07
APPROVED
CHF7iJyzKGcfxENyx2aPGw==
5530.0-5690.0
2019-06-07
APPROVED
CHF7iJyzKGcfxENyx2aPGw==
5745.0-5825.0
2019-06-07
APPROVED
JCSpbsKUp/lHKffN09hJRA==
2402.0-2480.0
2019-06-07
APPROVED
JCSpbsKUp/lHKffN09hJRA==
2412.0-2462.0
2019-06-07
APPROVED
File NameDocument TypeDateDirect
Test Report (Regular) W58Test Report 2019-06-07 00:00:00 pdf
Test Report (Regular) W56Test Report 2019-06-07 00:00:00 pdf
Test Report (Regular) W53Test Report 2019-06-07 00:00:00 pdf
Test Report (Regular) W52Test Report 2019-06-07 00:00:00 pdf
Test Report (Aux) W58Test Report 2019-06-07 00:00:00 pdf
Test Report (Aux) W56Test Report 2019-06-07 00:00:00 pdf
Test Report (Aux) W53Test Report 2019-06-07 00:00:00 pdf
Test Report (Aux) W52Test Report 2019-06-07 00:00:00 pdf
Test Report (XOR) W58Test Report 2019-06-07 00:00:00 pdf
Test Report (XOR) W56Test Report 2019-06-07 00:00:00 pdf
Test Report (XOR) W53Test Report 2019-06-07 00:00:00 pdf
Test Report (XOR) W52Test Report 2019-06-07 00:00:00 pdf
Test Report (DFS)Test Report 2019-06-07 00:00:00 pdf
Test Report (Radiated)Test Report 2019-06-07 00:00:00 pdf
RF ExposureRF Exposure Info 2019-06-07 00:00:00 pdf
FCC ID LabelID Label/Location Info 2019-06-07 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2019-06-07 00:00:00 pdf
Authorization SignatureCover Letter(s) 2019-06-07 00:00:00 pdf
Test Report (XOR)Test Report 2019-06-07 00:00:00 pdf
Test Report (Aux)Test Report 2019-06-07 00:00:00 pdf
Test Report (BLE)Test Report 2019-06-07 00:00:00 pdf
Ext PhotosExternal Photos 2019-12-04 00:00:00 N/A
Int PhotosInternal Photos 2019-12-04 00:00:00 N/A
SchematicsSchematics N/A
User ManualUsers Manual 2019-12-04 00:00:00 N/A
Block DiagramBlock Diagram N/A
PAG Re-use RequestOperational Description N/A
Setup Photos (DFS)Test Setup Photos 2019-12-04 00:00:00 N/A
Operation DescriptionOperational Description N/A
Setup Photos (Radiated)Test Setup Photos 2019-12-04 00:00:00 N/A
Setup Photos (Conducted)Test Setup Photos 2019-12-04 00:00:00 N/A
Software Security DeclarationOperational Description N/A

Application Details:

EquipmentCisco Catalyst 9120AX Series Wi-Fi 6 Access Points
FRN0004968939
Grantee CodeLDK
Product CodeVCVER1937
Applicant BusinessCisco Systems Inc
Business Address125 West Tasman Drive , San Jose,California United States 95134-1706
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantGerard Thorpe – Manager, Engineering
Applicant Phone
Applicant Fax408-527-7097
Applicant Email[email protected]
Applicant MailStop
Test FirmBay Area Compliance Laboratories Corporation
Test Firm ContactLisa Tang
Test Firm Phone 3043
Test Firm Fax408 732 9164
Test Firm Email[email protected]
Certified ByGerard Thorpe –
Comment [CHF7iJyzKGcfxENyx2aPGw==]: Output power listed is conducted. Device supports 20/40/80/160 MHz bandwidth modes and 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.
Comment [JCSpbsKUp/lHKffN09hJRA==]: Output power listed is conducted. Device supports 20 MHz bandwidth and 4x4 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installations and transmitter operating conditions for satisfying RF exposure compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC