U4FTBII

FCC ID

Equipment: Wireless Equipment

Datalogic S.r.l. TBII

Via S. Vitalino 13, Calderara di Reno, N/A 40012 Italy

Application
Frequency Range
Final Action Date
Granted
uvgRlvs2b1Kgtky9QzNFmw==
-
2019-06-05
APPROVED
bjOVMJ1dCXE3eOSSno3Vkw==
2402.0-2480.0
2019-06-05
APPROVED
SSF3/EREwlgwmUw/HhqVkQ==
2412.0-2472.0
2019-06-05
APPROVED
RmYZ9imKGL0qDb8pvW38kw==
5180.0-5240.0
2019-06-05
APPROVED
RmYZ9imKGL0qDb8pvW38kw==
5260.0-5320.0
2019-06-05
APPROVED
RmYZ9imKGL0qDb8pvW38kw==
5500.0-5720.0
2019-06-05
APPROVED
RmYZ9imKGL0qDb8pvW38kw==
5745.0-5825.0
2019-06-05
APPROVED
0QCXcgALge692ygvnj4DTw==
2412.0-2472.0
2019-06-05
APPROVED
RW1O3ge4uiRy3gGXMSde4Q==
2402.0-2480.0
2019-06-05
APPROVED
/eXnRQfBaCJoL/XjsEyIWQ==
-
2019-06-05
APPROVED
RTQNWHd3Z2GS9wiqe0dPyA==
5180.0-5240.0
2019-06-05
APPROVED
RTQNWHd3Z2GS9wiqe0dPyA==
5260.0-5320.0
2019-06-05
APPROVED
RTQNWHd3Z2GS9wiqe0dPyA==
5500.0-5720.0
2019-06-05
APPROVED
RTQNWHd3Z2GS9wiqe0dPyA==
5745.0-5825.0
2019-06-05
APPROVED
MqImMH0rACR5vpIIymGRZg==
2402.0-2480.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5180.0-5240.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5190.0-5230.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5210.0-5210.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5260.0-5320.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5270.0-5310.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5290.0-5290.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5500.0-5720.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5510.0-5710.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5530.0-5690.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5745.0-5825.0
2019-02-01
APPROVED
m4DMT6KYU6xIfJe/1layaA==
5775.0-5775.0
2019-02-01
APPROVED
j6eoBW8dzEHZsDdzQ9MnMQ==
2402.0-2480.0
2019-02-01
APPROVED
j6eoBW8dzEHZsDdzQ9MnMQ==
2412.0-2472.0
2019-02-01
APPROVED
j6eoBW8dzEHZsDdzQ9MnMQ==
2422.0-2462.0
2019-02-01
APPROVED
Q6PZJVR/K+1V5OcJmeoCGg==
-
2019-02-01
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5180.0-5240.0
2018-12-28
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5190.0-5230.0
2018-12-28
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5210.0-5210.0
2018-12-28
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5260.0-5320.0
2018-12-28
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5270.0-5310.0
2018-12-28
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5290.0-5290.0
2018-12-28
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5500.0-5720.0
2018-12-28
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5510.0-5710.0
2018-12-28
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5530.0-5690.0
2018-12-28
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5745.0-5825.0
2018-12-28
APPROVED
8IYFjuqcMyPw5yJY+BuKfQ==
5775.0-5775.0
2018-12-28
APPROVED
CLHaiwtH9AqIGU2g49jEuw==
-
2018-12-28
APPROVED
mbQ0p3+bMc9hCJHH2wJ0mw==
2402.0-2480.0
2018-12-28
APPROVED
mbQ0p3+bMc9hCJHH2wJ0mw==
2412.0-2472.0
2018-12-28
APPROVED
mbQ0p3+bMc9hCJHH2wJ0mw==
2422.0-2462.0
2018-12-28
APPROVED
w0j36UGq93VPNmA0uADFIw==
2402.0-2480.0
2018-12-28
APPROVED
File NameDocument TypeDateDirect
User ManualUsers Manual 2019-06-05 00:00:00 pdf
POACover Letter(s) 2019-06-05 00:00:00 pdf
LabelID Label/Location Info 2019-06-05 00:00:00 pdf
Internal PhotosInternal Photos 2019-06-05 00:00:00 pdf
External PhotosExternal Photos 2019-06-05 00:00:00 pdf
C2PCCover Letter(s) 2019-06-05 00:00:00 pdf
SAR ReportRF Exposure Info 2019-06-05 00:00:00 pdf
SAR Report Appendix DRF Exposure Info 2019-06-05 00:00:00 pdf
SAR Report Appendix CRF Exposure Info 2019-06-05 00:00:00 pdf
SAR Report Appendix BRF Exposure Info 2019-06-05 00:00:00 pdf
SAR Report Appendix ARF Exposure Info 2019-06-05 00:00:00 pdf
Label InfoID Label/Location Info 2019-06-05 00:00:00 pdf
Class II Permissive Change LetterCover Letter(s) 2019-06-05 00:00:00 pdf
Test Report_NIITest Report 2019-02-01 00:00:00 pdf
Test Setup Photos_NIITest Setup Photos 2019-02-01 00:00:00 pdf
C2PC Request LetterCover Letter(s) 2019-02-01 00:00:00 pdf
Test Report_WiFiTest Report 2019-02-01 00:00:00 pdf
Test Report_BLETest Report 2019-02-01 00:00:00 pdf
Test Setup Photos_WiFiTest Setup Photos 2019-02-01 00:00:00 pdf
Test Setup Photos_BLETest Setup Photos 2019-02-01 00:00:00 pdf
Test Report_DSSTest Report 2019-02-01 00:00:00 pdf
Test Setup Photos_DSSTest Setup Photos 2019-02-01 00:00:00 pdf
ID Label and Label LocationID Label/Location Info 2018-12-28 00:00:00 pdf
POA from original holderCover Letter(s) 2018-12-28 00:00:00 pdf
Change ID Request LetterCover Letter(s) 2018-12-28 00:00:00 pdf

Application Details:

EquipmentWireless Equipment
FRN0016179699
Grantee CodeU4F
Product CodeTBII
Applicant BusinessDatalogic S.r.l.
Business AddressVia S. Vitalino 13 , Calderara di Reno,N/A Italy 40012
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
TCB Email[email protected]
ApplicantRuggero Cacioppo – Product Quality Leader
Applicant Phone 393
Applicant Fax+39 051 3147 288
Applicant Email[email protected]
Applicant MailStop
Test FirmSporton International Inc.
Test Firm ContactAlex Chen
Test Firm Phone
Test Firm Fax+886-3-327-0978
Test Firm Email[email protected]
Certified ByLeo Huang – Manager
Comment [/eXnRQfBaCJoL/XjsEyIWQ==]: Class II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (7”)).
Comment [0QCXcgALge692ygvnj4DTw==]: Class II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (7”)). Limited Modular Approval. Output Power listed is the maximum combined conducted output power. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.64 W/kg and 0.64 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.
Comment [8IYFjuqcMyPw5yJY+BuKfQ==]: Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.32 W/kg and 0.32 W/kg respectively.
Comment [bjOVMJ1dCXE3eOSSno3Vkw==]: Class II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (10”)). Limited Modular Approval. Output Power listed is the maximum conducted output power.
Comment [j6eoBW8dzEHZsDdzQ9MnMQ==]: Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.77 W/kg and 0.77 W/kg respectively. Class II Permissive Change: address to add additional antenna as documented in this filing.
Comment [m4DMT6KYU6xIfJe/1layaA==]: Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.32 W/kg and 0.32 W/kg respectively. Class II Permissive Change: address to add additional antenna as documented in this filing.
Comment [mbQ0p3+bMc9hCJHH2wJ0mw==]: Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.77 W/kg and 0.77 W/kg respectively.
Comment [MqImMH0rACR5vpIIymGRZg==]: Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1W/Kg. Class II Permissive Change: address to add additional antenna as documented in this filing.
Comment [Q6PZJVR/K+1V5OcJmeoCGg==]: Class II Permissive Change: address to add additional antenna as documented in this filing.
Comment [RmYZ9imKGL0qDb8pvW38kw==]: Class II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (10”)). Limited Modular Approval. Output Power listed is the maximum combined conducted output power. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.33 W/kg, respectively. This device supports 20, 40 and 80 MHz modes.
Comment [RTQNWHd3Z2GS9wiqe0dPyA==]: Class II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (7”)). Limited Modular Approval. Output Power listed is the maximum combined conducted output power. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.30 W/kg, respectively. This device supports 20, 40 and 80 MHz modes.
Comment [RW1O3ge4uiRy3gGXMSde4Q==]: Class II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (7”)). Limited Modular Approval. Output Power listed is the maximum conducted output power.
Comment [SSF3/EREwlgwmUw/HhqVkQ==]: Class II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (10”)). Limited Modular Approval. Output Power listed is the maximum combined conducted output power. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.19 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.
Comment [uvgRlvs2b1Kgtky9QzNFmw==]: Class II Permissive Change: Integration into Industrial Tablet PC Host (Model Taskbook (10”)).
Comment [w0j36UGq93VPNmA0uADFIw==]: Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1W/Kg.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC