|Applicant Business||u-blox AG|
|Business Address||Zuercherstrasse 68 , Thalwil,N/A Switzerland Ch-8800|
|TCB Scope||B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27|
|TCB Email||[email protected]|
|Applicant||Giulio Comar – Certification Manager |
|Applicant Phone|| |
|Applicant Email||[email protected]|
|Test Firm||CETECOM Inc.|
|Test Firm Contact||Kris Lazarov|
|Test Firm Phone|| |
|Test Firm Fax||408-586-6299|
|Test Firm Email||[email protected]|
|Certified By||Jake Bascon – |
Comment [+0jJSQ+5I8bIgIbwsqnXpA==]: Power out is conducted at the antenna terminal. Single Modular Approval.
This device is certified for mobile and fixed application. Co-location of this module with other transmitters would require the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts 22/24/27. The Grantee is responsible for providing the documentation required for modular use and this module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
The LTE feature supported for this device is for CAT M1 and NB-IoT modes only.