SARA-R412M_FCC Modular Approval Letter

FCC ID: XPYUBX18ZO01

Cover Letter(s)

Download: PDF
FCCID_4149054

                                                                                    Doc id: UBX-18064200

                                                Certification Declaration           Rev.: 1.0
                                                                                    Date: 11/14/2018



TCB Request for Confidentiality

Issued by:
        u-blox AG
        Zürcherstrasse 68
        CH-8800 Thalwil / Switzerland
        Phone: +41 44 722 74 44
        Fax:    +41 44 722 74 47
        info@u-blox.com


Receiver:
            American Certification Body, Inc.
            6731 Whittier Avenue
            Suite C110
            McLean, VA 22101

Subject:         Modular Approval Request
                 • FCC: XPYUBX18ZO01
                 • IC: 8595A-UBX18ZO01
                 • Model Name: SARA-R412M

The following attestation addresses the requirements to support modular approval:

Modular approval requirement                        Yes (provide brief statement)         No *

(a) The radio elements must have the radio                            Yes
frequency circuitry shielded. Physical
components and tuning capacitor(s) may
be located external to the shield, but must
be on the module assembly

(b) The module must have buffered                                     Yes
modulation/data inputs to ensure that the
device will comply with Part 15
requirements with any type of input signal

(c) The module must contain power supply                              Yes
regulation on the module

(d) The module must contain a                                         Yes
permanently attached antenna, or contain
a unique antenna connector, and be
marketed and operated only with specific
antenna(s), per Sections 15.203,
15.204(b), 15.204(c), 15.212(a), 2.929(b)

(e) The module must demonstrate                                       Yes
compliance in a stand-alone configuration



  Author    Jake Bascon                     Department:       cert                                  Page:   1/2

 Filename   SARA-R412MSARA-R412M_FCC Modular Approval Letter
  M102
                          Copyright © 2013 u-blox SD, Inc. All rights reserved            Confidential
  Rev. 1


                                                                                  Doc id: UBX-18064200

                                                 Certification Declaration        Rev.: 1.0
                                                                                  Date: 11/14/2018


(f) The module must be labelled with its                               Yes
permanently affixed FCC ID label, or use
an electronic display (See KDB Publication
784748 about labelling requirements)

(g) The module must comply with all                                    Yes
specific rules applicable to the transmitter.
The grantee must provide comprehensive
instructions to explain compliance
requirements

(h) The module must comply with RF                                     Yes
exposure requirements


* Please provide a detailed explanation if the answer is “No.”




___________________________________________________
Jake Bascon, Principal Certification Engineer




  Author    Jake Bascon                      Department:       cert                               Page:   2/2

 Filename   SARA-R412MSARA-R412M_FCC Modular Approval Letter
  M102
                           Copyright © 2013 u-blox SD, Inc. All rights reserved         Confidential
  Rev. 1



Document Created: 2018-11-14 16:51:55
Document Modified: 2018-11-14 16:51:55

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC