XPYJODYW167

FCC ID

Equipment: WLAN/Bluetooth host-based multiradio module JODY-W1

u-blox AG JODYW167

Zuercherstrasse 68, Thalwil, N/A Ch-8800 Switzerland

Application
Frequency Range
Final Action Date
Granted
HtEWWqZpCt5Rt6eETKpuNg==
5180.0-5240.0
2019-07-08
APPROVED
HtEWWqZpCt5Rt6eETKpuNg==
5260.0-5320.0
2019-07-08
APPROVED
HtEWWqZpCt5Rt6eETKpuNg==
5500.0-5700.0
2019-07-08
APPROVED
HtEWWqZpCt5Rt6eETKpuNg==
5745.0-5825.0
2019-07-08
APPROVED
QwxL5QCn5Md5p+XuIOsyMQ==
2402.0-2480.0
2019-07-08
APPROVED
QwxL5QCn5Md5p+XuIOsyMQ==
2412.0-2462.0
2019-07-08
APPROVED
File NameDocument TypeDateDirect
JODY-W167_User manualUsers Manual 2019-07-08 00:00:00 pdf
MDE_UBLOX_1701_FCCa_FCC15_247_Photo_ReportTest Setup Photos 2019-07-08 00:00:00 pdf
MDE_UBLOX_1828_FCCg_SIGNED_reduced_sizeTest Report 2019-07-08 00:00:00 pdf
MDE_UBLOX_1828_FCCf_SIGNEDTest Report 2019-07-08 00:00:00 pdf
FCC - RF exposure evaluation for mobile devices_Rev3RF Exposure Info 2019-07-08 00:00:00 pdf
JODY-W167_Label_LocationID Label/Location Info 2019-07-08 00:00:00 pdf
JODY-W167_Internal_PhotoInternal Photos 2019-07-08 00:00:00 pdf
JODY-W167_External_PhotoExternal Photos 2019-07-08 00:00:00 pdf
JODY-W167_Confidentiality_Request-FCC_r1Cover Letter(s) 2019-07-08 00:00:00 pdf
JODY-W167_Auth_Letter-FCCCover Letter(s) 2019-07-08 00:00:00 pdf
FCC_IC_signature_Authorization_LetterCover Letter(s) 2019-07-08 00:00:00 pdf
ACB-FORM-FCC-Modular-Letter_Rev1Cover Letter(s) 2019-07-08 00:00:00 pdf
MDE_UBLOX_1828_FCCd_SIGNEDTest Report 2019-07-08 00:00:00 pdf
Confidential_JODY-W167_sw_sec_sw_config_descOperational Description N/A
Confidential_JODY_W167_SchematicsSchematics N/A
JODY-W167_AntenneReferenceDesign_r1Operational Description N/A
JODY-W167_Block_DiagramBlock Diagram N/A
JODY-W167_Operational Description_r1Operational Description N/A

Application Details:

EquipmentWLAN/Bluetooth host-based multiradio module JODY-W1
FRN0004378865
Grantee CodeXPY
Product CodeJODYW167
Applicant Businessu-blox AG
Business AddressZuercherstrasse 68 , Thalwil,N/A Switzerland Ch-8800
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantGiulio Comar – Certification Manager
Applicant Phone
Applicant Fax+390402529394
Applicant Email[email protected]
Applicant MailStop
Test Firm7layers GmbH
Test Firm ContactBernhard Retka
Test Firm Phone
Test Firm Fax0049 2102 749 350
Test Firm Email[email protected]
Certified ByImad Hjije – Project Manager
Comment [HtEWWqZpCt5Rt6eETKpuNg==]: Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains 2.4G WLAN, BT and BLE transmitters.
Comment [QwxL5QCn5Md5p+XuIOsyMQ==]: Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device only has 20 MHz bandwidth mode. This device also contains 5G WLAN transmitter.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC