QPN-MP3PLUS

FCC ID

Equipment: Connected Mobile with Printer

MobiWire SAS -MP3PLUS

79 avenue Francois Arago, 92000 NANTERRE France, NANTERRE, N/A N/A France

Application
Frequency Range
Final Action Date
Granted
JqTdxrO09so2I70fK+EyBw==
2402.0-2480.0
2018-12-28
APPROVED
JqTdxrO09so2I70fK+EyBw==
2412.0-2462.0
2018-12-28
APPROVED
9WBqUr+WFzJi/6WNOH5RIA==
2402.0-2480.0
2018-12-28
APPROVED
1ekTrWtT4ixYVtzNZ3aPvg==
-
2018-12-28
APPROVED
cLu4FfT5ElOU+KWrz0CVvg==
13.56-13.56
2018-12-28
APPROVED
XyEdtS0lNEqSqr/ZNCsIyg==
824.2-848.8
2018-12-28
APPROVED
XyEdtS0lNEqSqr/ZNCsIyg==
826.4-846.6
2018-12-28
APPROVED
XyEdtS0lNEqSqr/ZNCsIyg==
1850.2-1909.8
2018-12-28
APPROVED
XyEdtS0lNEqSqr/ZNCsIyg==
1852.4-1907.6
2018-12-28
APPROVED
File NameDocument TypeDateDirect
Test Report_PCB_2Test Report 2018-12-28 00:00:00 pdf
Test Report_PCB_1Test Report 2018-12-28 00:00:00 pdf
Test Report_SAR_2RF Exposure Info 2018-12-28 00:00:00 pdf
Test Report_SAR_1RF Exposure Info 2018-12-28 00:00:00 pdf
Test setup photo_SARTest Setup Photos 2018-12-28 00:00:00 pdf
Test setup photo_RFTest Setup Photos 2018-12-28 00:00:00 pdf
Users ManualUsers Manual 2018-12-28 00:00:00 pdf
Internal PhotosInternal Photos 2018-12-28 00:00:00 pdf
External PhotosExternal Photos 2018-12-28 00:00:00 pdf
ID LabelID Label/Location Info 2018-12-28 00:00:00 pdf
Label Location InfoID Label/Location Info 2018-12-28 00:00:00 pdf
CconfidentialityCover Letter(s) 2018-12-28 00:00:00 pdf
Declaration of authorizationCover Letter(s) 2018-12-28 00:00:00 pdf
Antenna positionCover Letter(s) 2018-12-28 00:00:00 pdf
Antenna specCover Letter(s) 2018-12-28 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2018-12-28 00:00:00 pdf
Test Report_JBPTest Report 2018-12-28 00:00:00 pdf
Test Setup Photos_SARTest Setup Photos 2018-12-28 00:00:00 pdf
Test Setup Photos_RFTest Setup Photos 2018-12-28 00:00:00 pdf
Test Report_DXXTest Report 2018-12-28 00:00:00 pdf
Test Report_WLANTest Report 2018-12-28 00:00:00 pdf
Test Report_BLETest Report 2018-12-28 00:00:00 pdf
confidentialityCover Letter(s) 2018-12-28 00:00:00 pdf
Test Report_DSSTest Report 2018-12-28 00:00:00 pdf
Block DiagramBlock Diagram N/A
Block Diagram_BT WLANBlock Diagram N/A
SchematicsSchematics N/A
Parts list (BOM)Parts List/Tune Up Info N/A
Tune up procedureParts List/Tune Up Info N/A
Operational DescriptionOperational Description N/A

Application Details:

EquipmentConnected Mobile with Printer
FRN0022120273
Grantee CodeQPN
Product Code-MP3PLUS
Applicant BusinessMobiWire SAS
Business Address79 avenue Francois Arago, 92000 NANTERRE France , NANTERRE,N/A France
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
TCB Email[email protected]
ApplicantBruno Mortreux – product manager
Applicant Phone
Applicant Fax+33 613 42 34 87
Applicant Email[email protected]
Applicant MailStop
Test FirmEast China Institute of Telecommunications
Test Firm ContactZheng Zhongbin
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByDavid – COO
Comment [9WBqUr+WFzJi/6WNOH5RIA==]: Output power is conducted. End-users must be informed of transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value for simultaneous transmission use condition is 1.12 W/kg.
Comment [JqTdxrO09so2I70fK+EyBw==]: Output power is conducted. SAR compliance for body worn operating conditions is limited to the specific configuration tested for this filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, hotspot, simultaneous transmission, and extremity (Limb) exposure conditions are 0.54 W/kg, 0.54 W/kg, 1.06 W/kg and 0.554 W/kg, respectively. This device has 20/40 MHz bandwidth modes.
Comment [XyEdtS0lNEqSqr/ZNCsIyg==]: Output power is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body, which includes use as hotspot. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, hotspot, simultaneous transmission, and extremity (Limb) exposure conditions are 1.01 W/kg, 1.01 W/kg, 1.12 W/kg and 1.04 W/kg, respectively.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC