QOQWFM200

FCC ID

Equipment: Wi-Fi 802.1 1 bgn SiP transceiver radio module

Silicon Laboratories Finland Oy WFM200

Alberga Business Park, Bertel Jungin aukio 3, Espoo, N/A 02600 Finland

Application
Frequency Range
Final Action Date
Granted
iL+qhpsyxDcKiAh+nBGH0w==
2412.0-2462.0
2019-10-02
APPROVED
File NameDocument TypeDateDirect
External PhotosExternal Photos 2019-10-02 00:00:00 pdf
MPE Test Report RF ExposureTest Report 2019-10-02 00:00:00 pdf
MPE Test Report SARTest Report 2019-10-02 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-10-02 00:00:00 pdf
Test ReportTest Report 2019-10-02 00:00:00 pdf
Internal PhotosInternal Photos 2019-10-02 00:00:00 pdf
Label Location InfoID Label/Location Info 2019-10-02 00:00:00 pdf
User Manual HardwareUsers Manual 2019-10-02 00:00:00 pdf
User ManualUsers Manual 2019-10-02 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2019-10-02 00:00:00 pdf
Modular Request LetterCover Letter(s) 2019-10-02 00:00:00 pdf
FCC Cover LetterCover Letter(s) 2019-10-02 00:00:00 pdf
Block DiagramBlock Diagram N/A
Operational Desc AntennaOperational Description N/A
Operational DescriptionOperational Description N/A
Parts List WFM200SAParts List/Tune Up Info N/A
Parts List WFM200SNParts List/Tune Up Info N/A
Schematics WFM200SASchematics N/A
Schematics WFM200SNSchematics N/A

Application Details:

EquipmentWi-Fi 802.1 1 bgn SiP transceiver radio module
FRN0007782659
Grantee CodeQOQ
Product CodeWFM200
Applicant BusinessSilicon Laboratories Finland Oy
Business AddressAlberga Business Park, Bertel Jungin aukio 3 , Espoo,N/A Finland 02600
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantPasi Rahikkala – Staff HW Engineer
Applicant Phone
Applicant Fax+358943550660
Applicant Email[email protected]
Applicant MailStop
Test FirmSGS Fimko Oy
Test Firm ContactJari Merikari
Test Firm Phone
Test Firm Fax358-9-696-5474
Test Firm Email[email protected]
Certified ByPasi Rahikkala –
Comment [iL+qhpsyxDcKiAh+nBGH0w==]: The output power listed is conducted. Single Modular Approval. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require a submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host / module authentication, or a new application if appropriate. This device is approved for both mobile and portable use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31 (k) composite system.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC