|Equipment||RFID UHF Reader|
|Applicant Business||Feig Electronic GmbH|
|Business Address||Lange Straße 4 , Weilburg-Waldhausen,N/A Germany D-35781|
|TCB Scope||A4: UNII devices & low power transmitters using spread spectrum techniques|
|TCB Email||[email protected]|
|Applicant||Elmar Reichwein – Manager |
|Applicant Phone|| |
|Applicant Fax||+49 6471 310999|
|Applicant Email||[email protected]|
|Test Firm||CTC advanced GmbH (former CETECOM ICT Services )|
|Test Firm Contact||Gerald Schmidt|
|Test Firm Phone|| |
|Test Firm Fax||49-681-598-8775|
|Test Firm Email||[email protected]|
|Certified By||Reinhard Monno – |
Comment [VvpQQGyshkwhX9xGJeUACw==]: Output power listed is peak conducted.
This device must be professionally installed.
This device must be installed to provide a separation distance of at least 23 cm from all persons.
RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.
End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
Only those antenna(s) as mentioned within the installation instructions must be used with this transmitter.