PD99260D2L

FCC ID

Equipment: Intel Dual Band Wireless-AC 9260

Intel Mobile Communications 9260D2L

100 Center Point Circle Suite 200, Columbia, SC 29210 United States

Application
Frequency Range
Final Action Date
Granted
jC7Lk+xOz5b+PF9qmofnJw==
2402.0-2480.0
2019-06-19
APPROVED
jC7Lk+xOz5b+PF9qmofnJw==
2412.0-2472.0
2019-06-19
APPROVED
jC7Lk+xOz5b+PF9qmofnJw==
2422.0-2462.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5180.0-5240.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5190.0-5230.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5210.0-5210.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5260.0-5320.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5270.0-5310.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5290.0-5290.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5500.0-5700.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5510.0-5670.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5530.0-5690.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5710.0-5710.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5720.0-5720.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5745.0-5825.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5755.0-5795.0
2019-06-19
APPROVED
FC70HvRwjyqtAkPxcrVJeQ==
5775.0-5775.0
2019-06-19
APPROVED
PEtNStFjHhrXUeVgzLsIbw==
2402.0-2480.0
2019-06-19
APPROVED
rg8ryqT4KsSjaWQJ7gm8Bw==
2402.0-2480.0
2019-06-19
APPROVED
rg8ryqT4KsSjaWQJ7gm8Bw==
2412.0-2472.0
2019-06-19
APPROVED
rg8ryqT4KsSjaWQJ7gm8Bw==
2422.0-2462.0
2019-06-19
APPROVED
hKuw7P5jZsSDXH9SqM1Xmw==
2402.0-2480.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5180.0-5240.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5190.0-5230.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5210.0-5210.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5260.0-5320.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5270.0-5310.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5290.0-5290.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5500.0-5700.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5510.0-5670.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5530.0-5690.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5710.0-5710.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5720.0-5720.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5745.0-5825.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5755.0-5795.0
2019-06-19
APPROVED
/NQZMOwcyGlWYjj6g7bw8w==
5775.0-5775.0
2019-06-19
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5180.0-5240.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5190.0-5230.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5210.0-5210.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5260.0-5320.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5270.0-5310.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5290.0-5290.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5500.0-5700.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5510.0-5670.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5530.0-5690.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5710.0-5710.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5720.0-5720.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5745.0-5825.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5755.0-5795.0
2019-05-10
APPROVED
+QCyTlY4YC1AMxBNbJJdsg==
5775.0-5775.0
2019-05-10
APPROVED
jggRj2wrUx4o2YsjuCFMJQ==
2402.0-2480.0
2019-05-10
APPROVED
jggRj2wrUx4o2YsjuCFMJQ==
2412.0-2472.0
2019-05-10
APPROVED
jggRj2wrUx4o2YsjuCFMJQ==
2422.0-2462.0
2019-05-10
APPROVED
HAVkgZneUAAE5cW7bZlEhQ==
2402.0-2480.0
2019-05-10
APPROVED
V3bGRpMqt2UfAmu2sUh8mw==
-
2019-02-06
APPROVED
4TEvJKcWCbsMqqQgAN92ng==
2402.0-2480.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5180.0-5240.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5190.0-5230.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5210.0-5210.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5260.0-5320.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5270.0-5310.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5290.0-5290.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5500.0-5700.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5510.0-5670.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5530.0-5690.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5710.0-5710.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5720.0-5720.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5745.0-5825.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5755.0-5795.0
2019-02-05
APPROVED
4Dmr1TeYqzbIfq6HT4DZLw==
5775.0-5775.0
2019-02-05
APPROVED
px23WavBvRWqT+zoZJxMgg==
2402.0-2480.0
2019-02-05
APPROVED
px23WavBvRWqT+zoZJxMgg==
2412.0-2472.0
2019-02-05
APPROVED
px23WavBvRWqT+zoZJxMgg==
2422.0-2462.0
2019-02-05
APPROVED
File NameDocument TypeDateDirect
RF Exposure SAR ReportRF Exposure Info 2019-06-19 00:00:00 pdf
Label and LocationID Label/Location Info 2019-06-19 00:00:00 pdf
Passive Scan AttestationAttestation Statements 2019-06-19 00:00:00 pdf
Software Security LetterCover Letter(s) 2019-06-19 00:00:00 pdf
Permissive Change LetterCover Letter(s) 2019-06-19 00:00:00 pdf
Cofidentiality LetterCover Letter(s) 2019-06-19 00:00:00 pdf
Labels and LocationsID Label/Location Info 2019-05-10 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2019-05-10 00:00:00 pdf
Authorization LetterCover Letter(s) 2019-05-10 00:00:00 pdf
Test Setup Photos RevisedTest Setup Photos 2019-08-04 00:00:00 pdf
Test Report JBP RevisedTest Report 2019-02-06 00:00:00 pdf
User ManualUsers Manual 2019-08-04 00:00:00 pdf
Test Report JBPTest Report 2019-02-06 00:00:00 pdf
Internal PhotosInternal Photos 2019-08-04 00:00:00 pdf
External PhotosExternal Photos 2019-08-04 00:00:00 pdf
Test Setup Photos SARTest Setup Photos 2019-08-04 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-08-04 00:00:00 pdf
Test Report DFSTest Report 2019-02-05 00:00:00 pdf
Test Report UNII 3Test Report 2019-02-05 00:00:00 pdf
Test Report UNII 2CTest Report 2019-02-05 00:00:00 pdf
Test Report UNII 1 and 2ATest Report 2019-02-05 00:00:00 pdf
Modular Approval LetterCover Letter(s) 2019-02-05 00:00:00 pdf
Test Report DTS BLE Part 2Test Report 2019-02-05 00:00:00 pdf
Test Report DTS BLE Part 1Test Report 2019-02-05 00:00:00 pdf
Test Report BTTest Report 2019-02-05 00:00:00 pdf
User Manual 1Users Manual 2019-10-19 00:00:00 N/A
User Manual 2Users Manual 2019-10-19 00:00:00 N/A
User Manual RegulatoryUsers Manual 2019-10-19 00:00:00 N/A
Description Antenna WNCOperational Description N/A
Description Antenna SpeedwireOperational Description N/A
Description Antenna Sky CrossOperational Description N/A
SchematicsSchematics N/A
Block DiagramBlock Diagram N/A
Description HardwareOperational Description N/A
Description Antenna SkyCrossOperational Description N/A
Description BluetoothOperational Description N/A
Descritpion Antenna SpeedwireOperational Description N/A

Application Details:

EquipmentIntel Dual Band Wireless-AC 9260
FRN0008035131
Grantee CodePD9
Product Code9260D2L
Applicant BusinessIntel Corporation
Business Address100 Center Point Circle Suite 200, Columbia,South Carolina United States 29210
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantSteven C Hackett – Product Regulations Engineer
Applicant Phone
Applicant Fax803-216-2766
Applicant Email[email protected]
Applicant MailStop
Test FirmIntel Corporation S.A.S.
Test Firm ContactNawfal ASRIH
Test Firm Phone
Test Firm Fax0033493001401
Test Firm Email[email protected]
Certified BySteven C. Hackett –
Comment [+QCyTlY4YC1AMxBNbJJdsg==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.53W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P82G, with antenna Speedwire part no F.0G.FH-6072-001-00 (Tx1 and Tx2), WNC part no 81ELAQ15.G27 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
Comment [/NQZMOwcyGlWYjj6g7bw8w==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.51W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [4Dmr1TeYqzbIfq6HT4DZLw==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [4TEvJKcWCbsMqqQgAN92ng==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [FC70HvRwjyqtAkPxcrVJeQ==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [HAVkgZneUAAE5cW7bZlEhQ==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.53W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P82G, with antenna Speedwire part no F.0G.FH-6072-001-00 (Tx1 and Tx2), WNC part no 81ELAQ15.G27 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
Comment [hKuw7P5jZsSDXH9SqM1Xmw==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.51W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [jC7Lk+xOz5b+PF9qmofnJw==]: Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.48W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [jggRj2wrUx4o2YsjuCFMJQ==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45W/kg and 1.53W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P82G, with antenna Speedwire part no F.0G.FH-6072-001-00 (Tx1 and Tx2), WNC part no 81ELAQ15.G27 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
Comment [PEtNStFjHhrXUeVgzLsIbw==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [px23WavBvRWqT+zoZJxMgg==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [rg8ryqT4KsSjaWQJ7gm8Bw==]: Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.55W/kg and 1.51W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC