Test Report JBP

FCC ID: PD99260D2L

Test Report

Download: PDF
FCCID_4160828

EMC Testreport FCC 47 CFR PART 15 B (US) Produkte Products INCL. ICES-003 (Canada) Prüfbericht-Nr.: Auftrags-Nr.: Seite 1 von 32 18062201.f01 3001573083/ Test Report No.: Order No.: Page 1 of 32 92/93/94 Kunden-Referenz-Nr.: Auftragsdatum: 4602437 July 2, 2018 Client Reference No.: Order date: Auftraggeber: Intel Corporation SAS, Le Cargo B6 / 424 Rue de Goa, 06600 Antibes, France Client: Prüfgegenstand: Wireless Network Card Test item: Bezeichnung / Typ-Nr.: AX201NGW Identification / Type No.: Auftrags-Inhalt: Compliance with EMC Standards Order content: Prüfgrundlage: Test specification: 47 CFR PART 15 (10-1-17 EDITION), Subpart 15B ICES-003 (Issue 6, January 2016) Wareneingangsdatum: Aug. 28, 2018 Date of receipt: Prüfmuster-Nr.: Engineering Sample Test sample No.: Prüfzeitraum: Aug. 29 – Sept. 20, 2018 Testing period: Ort der Prüfung: Leek Place of testing: Prüflaboratorium: TÜV Rheinland Nederland Testing laboratory: B.V. Leek Laboratory Prüfergebnis*: Test result*: Pass Geprüft von / tested by: Kontrolliert von / reviewed by: Sept. 12, 2018 T.E.T. Koning, Senior Engineer EMC Sept. 12, 2018 K.F. van der Molen, Senior expert EMC Datum Name / Stellung Unterschrift Datum Name / Stellung Unterschrift Date Name / Position Signature Date Name / Position Signature Sonstiges / Other: None Zustand des Prüfgegenstandes be Anlieferung: Prüfmuster vollständig und unbeschädigt Condition of the test item at delivery: Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T/ = nicht getested Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. Test specification(s) F(ail) a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwending eines Prüfzeichens. This test report only relates to the a.m. testsample. Without permission of the test center this test report is not permitted to be V04 duplicated in extracts. This report does not entitle to carry any test mark TÜV Rheinland Nederland B.V. . Eiberkamp 10 . 9351 VT Leek . Tel: + 31 88 8887888 Mail: info@nl.tuv.com . Web: www.tuv.com

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 2 von 32 Test report No: 18062201.f01 Page 2 of 32 Liste der verwendenten Prüfmittel List of used test equipment Prüfmittel Nr. / ID-Nr. Prüfmittel Nächste Kalibrierung Equipment No. / ID-No. Test equipment Next calibration Verified List September, 2018 Conducted emission A00726 Rohde & ESCS30 Measurement Receiver 25-10-2018 Schwarz A01978 Rohde & ESH3-Z2 Impulse Limiter 27-6-2019 Schwarz A00051 Rohde & ESH3-Z2 Impulse Limiter 15-11-2018 Schwarz A01980 Rohde & ESCS 30 Test Receiver 28-6-2019 Schwarz A00022 Emco 3725/2 LISN FCC 50 uH / 50 ohm 30-1-2019 A00023 Emco 3625/2 LISN 5 uH / 50 ohm 14-11-2018 A00354 Rohde & ESH2-Z5 LISN- artificial Network 27-6-2019 Schwarz A00093 COMTES 1415 Conducted Reference 4-6-2019 T Source 9kHz-50MHz A02011 Rohde & ESH 3-Z5 LISN 7-11-2018 Schwarz Radiated emission A00314 Rohde & ESCI Measurement Receiver 13-4-2019 Schwarz (9kHz-3GHz) A00337 R&S FSV30 Signal Analyzer/Spectrum 21-6-2019 Analyzer A00077 Chase CBL6111B Biconilog 1-12-2019 A00029 Emco 4610 Gen. field source 29-1-2019 A00235 Siepel FCC FCC Test Site Registration nr 15-3-2020 786213 A00313 Comtest Site registration filing Indus- 20-11-2020 try Canada A00436 Siepel S-AR 28-9-2020 A00447 Gigalink APG0500 RF Cable S-AR 7-2-2019 A00466 Teseq CBL 6111D Antenne S-AR, BiLog 11-10-2018 30MHz-1GHz A01982 Rohde & ESR7 EMI Test Receiver 7GHz 6-7-2019 Schwarz A00008 Emco 3115 Guide ant. 1-18GHz 19-12-2020 A00009 Emco 3115 Guide ant. 1-18GHz 13-2-2019 A00011 Emco 3116 Guide ant. 18-40GHz 13-2-2019 A00012 Emco 3160-09 Gain horn 18-26.5GHz 13-2-2019 A00209 Emco 3160-09 Gain horn 18-26.5GHz 13-2-2019 A00210 Emco 3160-10 Gain horn 26.5-40GHz 13-2-2019 A00339 H&S Sucotest Cable RF S-AR >1G setup 13-7-2019 18/Sucoflex 102 Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 3 von 32 Test report No: 18062201.f01 Page 3 of 32 A00340 H&S Sucotest Cable RF 12-7-2019 18/Sucoflex 102 A00341 H&S Sucotest Cable RF 12-7-2019 18/Sucoflex 102 A01473 Anritsu MS2713E Spectrum Analyzer 25-10-2018 Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 4 von 32 Test report No: 18062201.f01 Page 4 of 32 1 Produktdetails Wireless Communication Card AX201NGW Product details 2 Maße / Gewicht << 50 gr Dimensions / Weight 3 Bedienelemente Built inside Extender, processed by laptop Operating elements 4 Ausstattung / Zubehör Extender card CRF CNV10 DB M2 PCB00651_01 Equipment / Accessories 5 Verwendete Materialien PCB/Components Used materials 6 Sonstiges Tested in external Extender card Other 7 This report concerns: EMC Verification Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 5 von 32 Test report No: 18062201.f01 Page 5 of 32 Absatz Clause Anforderungen – Prüfungen / Requirements - Tests 1 47 CFR Part 15 (10-1-17 Edition) - 15.107(a) AC Power Line Conducted P ICES-003 (Issue 6, January 2016) – Emissions F Section 6.1 Table 2 N/A N/T 2 47 CFR Part 15 (10-1-17 Edition) - 15.109 Radiated unwanted emissions P ICES-003 (Issue 6, January 2016) – F Section 6.2.1 Table 5 N/A N/T Zusammenfassung der Prüfergebnisse Summary of test results Index Prüfung Anwendbar Prüfergebnis Paragraf Messungen un- Kommentar Index Test Applicable Test result Paragraph ter Akkreditie- Remark rung ausge- führt under accredita- tion Radiated emission Page 12 Yes Pass 3.1 Yes < 1000 MHz Radiated emission Page 18 Yes Pass 3.2 Yes > 1000 GHz Conducted emis- Page 26 Yes Pass 3.3 Yes sion AC port Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 6 von 32 Test report No: 18062201.f01 Page 6 of 32 Table of contents 1 General test configuration. .................................................................................................................................... 8 1.1 Tested system auxiliary details. .................................................................................................................... 9 1.2 Test methodology. ...................................................................................................................................... 10 1.3 Test facility. ................................................................................................................................................. 10 1.4 Test conditions. ........................................................................................................................................... 10 2 System test configuration. .................................................................................................................................. 10 2.1 Justification. ................................................................................................................................................ 10 2.2 EUT mode of operation. .............................................................................................................................. 10 2.3 Special accessories. ................................................................................................................................... 11 2.4 Equipment modifications. ............................................................................................................................ 11 3 Test results Emission according to FCC CRF47 Part 15B ................................................................................. 12 3.1 Enclosure Radiated Emission 30-1000 MHz .............................................................................................. 12 3.2 Enclosure Radiated emission 1000 MHz – 25000 MHz ............................................................................. 18 3.3 AC Mains Conducted Emission 0.15-30 MHz ............................................................................................ 26 Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 7 von 32 Test report No: 18062201.f01 Page 7 of 32 Revisions Revisions Revision Datum Anmerkung Verfasser Revision Date Remark Author 00 11-9-2018 First Release T.E.T. Koning Note: Latest revision report will replace all previous reports Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 8 von 32 Test report No: 18062201.f01 Page 8 of 32 CONDITIONS FOR TESTING 1 General test configuration. Test item Wireless Communication Card Model AX201NGW Manufacturer Intel Corporation SAS, Le Cargo B6 / 424 Rue de Goa, 06600 Antibes, France Voltage input rating Powered by extension board around 2-5 V DC Current input rating n.a. Test software Driver version Auxiliary Equipment See drawing in 1.1 Remarks EUT tested in external extension board List of used cables Number Function From To Length Remarks 1 AC Mains Laptop Any Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 9 von 32 Test report No: 18062201.f01 Page 9 of 32 1.1 Tested system auxiliary details. Details and an overview of the system and all of its components, as it has been tested, may be found below. Test item (EUT1) : Wireless Communication Card Manufacturer : Intel Corporation SAS Brand mark : Intel Model : AX201NGW Serial number : Engineering Sample Remark : Tested in Extender board Test item (AUX1) : Extender Main and Card board Manufacturer : Intel Corporation SAS Brand mark : Intel Model : CRF CNVIO DB M2 Serial number : PCB00651_01 Remark : Used to have a functional EUT outside a PC or laptop Test item (AUX2) : Laptop Manufacturer : Dell Brand mark : Dell Model : E5470 Serial number : --- Remark : Used as Host for AUX 1 Test item (AUX3) : Mobile Phone Manufacturer : Samsung Brand mark : Samsung Model : Galaxy J7 (2016) Serial number : --- Remark : Used for BT communication Blue ribbon cable enabling data communication between Aux 1 and Aux2 Power Supply Aux2 laptop Aux1 Power Supply Extender board with EUT USB cable enabling BT data communication between Aux 1 and Aux2 230 VAC 50 Hz 230 VAC 50 Hz AUX3, used in BT mode Figure 1. Total set-up used during testing Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 10 von 32 Test report No: 18062201.f01 Page 10 of 32 1.2 Test methodology. The test methodology used is based on the requirements of 47 CFR Part 15 (10-1-17 Edition), sections 15.31, 15.107 and 15.109 and ICES-003 Issue 6 (January 2016) Sections 6.1 and 6.2. The EUT was tested in horizontal position only and is regarded as Table Top equipment. The test methods, which have been used, are based on ANSI C63.4-2014. Radiated emission tests were performed at a measurement distance of 3 meters. The receivers are switching automatically to the right bandwidth in accordance with CISPR 16. This is implemented in the receiver. The antenna factors are programmed in the test receiver. The receiver automatically calculates the appropriate correction factor for the utilized antenna and also the appropriate antenna factor for the cable loss. The total correction is automatically added to the measured value. 1.3 Test facility. The Federal Communications Commission and Industry Canada has reviewed the technical characteristics of the test facilities at TÜV Rheinland Nederland B.V., located at Eiberkamp 10, 9351 VT Leek, The Netherlands, and has found these test facilities to be in compliance with the requirements of 47 CFR Part 15, section 2.948. The description of the test facilities has been filed at the Office of the Federal Communications Commission under registration number 786213. The facility has been added to the list of laboratories performing these test services for the public on a fee basis. The description of the test facilities has been filed to Industry Canada under registration number 2932G-2. The facility has been added to the list of laboratories performing these test services for the public on a fee basis. 1.4 Test conditions. Normal test conditions: Temperature (*) : +15°C to +35°C Relative humidity(*) : 20 % to 75 % Supply voltage : 120 Vac / 60 Hz *When it was impracticable to carry out the tests under these conditions, a note to this effect stating the ambient temperature and relative humidity during the tests are stated separately. 2 System test configuration. 2.1 Justification. The system was configured for testing in a typical situation as a customer would normally use it. The test sample was configured by the applicant to enable continuous transmit. A normal 2.4 and/or 5 GHz Internet Link has been built-up to enable communication The justification and manipulation of cables and equipment in order to simulate a worst-case behavior of the test setup has been carried out as prescribed in ANSI C63.4-2014. 2.2 EUT mode of operation. The unintentional radiator tests have been performed with a complete functioning EUT. Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 11 von 32 Test report No: 18062201.f01 Page 11 of 32 2.3 Special accessories. No special accessories are used and/or needed to achieve compliance. 2.4 Equipment modifications. No modifications have been made to the equipment. Rev.:01

Produkte Products Prufbericht-Nr: Seite 12 von 32 Test report No: Page 12 of 32 3 Test results Emission according to FCC CRF47 Part 15B 3.1 Enclosure Radiated Emission 30-1000 MHz 3.1.1 Definition Result of the measurements concerning radiated electromagnetic fields (electric component) emitted by the total set-up of the EUT. 3.1.2 Basic standard The test is performed according to FCC CRF 47 Part 15B § 15.109 3.1.3 Limit FCC 15.109(a) and IC ICES-003 section 6.2 Except for Class A digital devices, the field strength of radiated emissions from an unintentional radiator shall not exceed the field strength levels specified in the following table: Frequency Field strength Field strength Measurement distance (MHz) (μV/meter) (dBμV/m) (meters) 30-88 100 40.0 3 88-216 150 43.5 3 216-960 200 46.0 3 Above 960 500 54.0 3 Table of Applicable Limits 3.1.4 Test procedures ANSI C63.4-2014. Before final measurements of radiated emissions were performed, the EUT was scanned to determine its emission spectrum profile. The physical arrangement of the test system, the associated cabling and the EUT orientation (X, Y, Z) were varied in order to ensure that maximum emission amplitudes were attained. The spectrum was examined from 30MHz to 25 GHz, the fifth harmonic of the implemented WLAN module. Final radiated emission measurements were made at 3 m distance. At each frequency where a spurious emission was found, the EUT was rotated 360° and the antenna was raised and lowered from 1 to 4 m in order to determine the emission’s maximum level. Measurements were taken using both horizontal and vertical antenna polarizations. The highest emission amplitudes relative to the appropriate limit were recorded in this report. Field strength values of radiated emissions at frequencies not listed in the tables are more than 20 dB below the applicable limit. 3.1.5 Test deviation There is no deviation with the original standard

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 13 von 32 Test report No: 18062201.f01 Page 13 of 32 3.1.6 Test results Test conditions Ambient temperature 27.4 Relative humidity (%) 53.7 (0C) Air pressure (hPa) --- Test location Leek Applied Standard(s) 47 CFR Part 15 (10-1-17 Edition), ICES-003, January 2016) Test engineer T.E.T. Koning Test result Pass Test date Sept 4, 2018 Signature: Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 14 von 32 Test report No: 18062201.f01 Page 14 of 32 3.1.6.1 Test results 2.4 GHz WiFi Mode Results and limits Frequency Result Antenna po- Limit Margin Height Angle (MHz) (dBV/m) larization (dBV/m) (cm) (deg) 39.08 27.6 Vertical 40.0 12.4 99.7 218.0 104.45 19.3 Vertical 40.0 20.7 99.7 140.5 169.77 22.4 Vertical 40.0 17.6 99.7 81.0 181.31 35.4 Horizontal 40.0 4.6 209.5 234.3 181.33 33.4 Vertical 40.0 6.6 99.6 99.9 357.76 33.3 Horizontal 47.0 13.7 99.6 337.7 Table 1 Results Enclosure Radiated Emission 30.0 – 1000 MHz 3.1.6.2 Test results 5 GHz WiFi Mode and BT Mode Results and limits Frequency Result Antenna po- Limit Margin Height Angle (MHz) (dBV/m) larization (dBV/m) (cm) (deg) 32.71 22.0 Vertical 40.0 18.0 99.6 316.6 68.55 22.1 Vertical 40.0 17.9 99.6 151.2 68.62 25.1 Horizontal 40.0 14.9 242.5 0.3 170.23 26.7 Horizontal 40.0 13.4 141.6 238.3 180.90 38.4 Horizontal 40.0 1.6 99.6 233.6 218.49 26.5 Horizontal 40.0 13.5 99.6 245.8 Table 2 Results Enclosure Radiated Emission 30.0 – 1000 MHz Used Equipment A01982 A00029 A00235 A00313 A00447 A00466 Notes: 1. Field strength values of radiated emissions at frequencies not listed in the table above are more than 20 dB below the applicable limit. 2. Measurement uncertainty is 5.1 dB. 3. The EUT was tested in horizontal orientation only-it’s normal operation orientation, the measuring antenna was varied in horizontal and vertical orientations and also around it’s axis and height. The reported value is the worst case found at the reported frequency. 4. A selection of Photos and Graphical Displays is provided on the next pages. Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 15 von 32 Test report No: 18062201.f01 Page 15 of 32 3.1.6.3 Photograph test setup Photo 1 Photograph test setup radiated emissions 30-1000 MHz Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 16 von 32 Test report No: 18062201.f01 Page 16 of 32 3.1.6.4 Spectrum plot 2.4 GHz WiFi Mode Plot 1: Pre-scan plot with peak detector. Radiated emissions from 30 MHz to 1000 MHz. Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 17 von 32 Test report No: 18062201.f01 Page 17 of 32 3.1.6.5 Spectrum plot 5 GHz WiFi Mode and BT Mode Plot 2: Pre-scan plot with peak detector. Radiated emissions from 30 MHz to 1000 MHz. Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 18 von 32 Test report No: 18062201.f01 Page 18 of 32 3.2 Enclosure Radiated emission 1000 MHz – 25000 MHz 3.2.1 2.4 GHz WiFi Mode Results and limits Frequency Peak Results Average Results Horizontal Vertical Limit Horizontal Vertical Limit (GHz) (dBV/m) (dBV/m) (dBV/m) (dBV/m) (dBV/m) (dBV/m) 1.32 << 43.0 74.0 << 29.0 54.0 1.872 60.0 46.2 74.0 46.5 38.4 54.0 2.12825 << 46.0 74.0 << 31.0 54.0 2.12-25 < 45.0 < 45.0 74.0 < 35.0 < 35.0 54.0 Table 3 Results Enclosure Radiated Emission 1000.0 – 25000.0 MHz 3.2.2 5 GHz WiFi Mode and BT Mode Results and limits Frequency Peak Results Average Results Horizontal Vertical Limit Horizontal Vertical Limit (GHz) (dBV/m) (dBV/m) (dBV/m) (dBV/m) (dBV/m) (dBV/m) 1.872 52.0 46.0 74.0 32.0 38.0 54.0 2.12375 << 46.5 74.0 << 31.0 54.0 2.664 << 48.5 74.0 << 31.0 54.0 2.664-25.0 < 45.0 < 45.0 74.0 < 30.0 < 30.0 54.0 Table 4 Results Enclosure Radiated Emission 1000.0 – 25000.0 MHz Notes: Field strength values of radiated emissions at frequencies not listed in the table above are more than 25 dB below the applicable limit. 1. Measurement uncertainty is +/- 5.13 dB 2. The reported field strength values are the worst case values at the indicated frequency. The receiving antenna was varied in horizontal and vertical orientations and also in height (between 1m and 2m). 3. A Peak and Average detector was used with a resolution bandwidth of 1MHz. Used Equipment A01982 A00337 A00338 A00235 A00313 A00447 A00008 Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 19 von 32 Test report No: 18062201.f01 Page 19 of 32 3.2.3 Photograph test setup 1- 6 GHz Photo 2: Photograph radiated emissions 1 – 6 GHz Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 20 von 32 Test report No: 18062201.f01 Page 20 of 32 3.2.4 test setup 6-18 GHz Photo 3: Photograph radiated emissions 6 – 18 GHz (Applying another Gainhorn in the range 18-25 GHz) Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 21 von 32 Test report No: 18062201.f01 Page 21 of 32 3.2.5 test setup 18-25 GHz Photo 4: Photograph radiated emissions 6 – 18 GHz (Applying another Gainhorn in the range 18-25 GHz) Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 22 von 32 Test report No: 18062201.f01 Page 22 of 32 3.2.6 Spectrum plot 2.4 GHz WiFi Mode Plot 3: Pre-scan plot with peak detector. Radiated emissions from 1 GHz – 6 GHz. Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 23 von 32 Test report No: 18062201.f01 Page 23 of 32 3.2.7 Spectrum plot 5 GHz WiFi Mode and BT Mode, 1 – 6 GHz Plot 4: Pre-scan plot with peak detector. Radiated emissions from 1 GHz – 6 GHz. Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 24 von 32 Test report No: 18062201.f01 Page 24 of 32 3.2.8 Spectrum plot 5 GHz WiFi Mode and BT Mode, 6 – 18 GHz Plot 5: Pre-scan plot with peak detector. Radiated emissions from 6 GHz – 18 GHz. Noise peaks are non EUT Related Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 25 von 32 Test report No: 18062201.f01 Page 25 of 32 3.2.9 Spectrum plot 5 GHz WiFi Mode and BT Mode, 18-25 GHz Plot 6: Pre-scan plot with peak detector. Radiated emissions from 18 GHz – 25 GHz. Noise peaks are only EUT Related if mentioned in the tables in Clause 3.2 Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 26 von 32 Test report No: 18062201.f01 Page 26 of 32 3.3 AC Mains Conducted Emission 0.15-30 MHz 3.3.1 Definition Result of the measurements concerning the disturbance voltage level at the power input port emitted by the total set-up of the EUT. 3.3.2 Basic standard The test is performed according to FCC CRF 47 Part 15B § 15.107 3.3.3 Limit Limit Limit Frequency (MHz) Quasi-peak(dBV) Average(dBV) 0.15 - 0.50 66.0 – 56.0 56.0 – 46.0 0.50 - 5.0 56.0 46.0 5.0 – 30.0 60.0 50.0 3.3.4 Test procedures Requirements: 15.107 (a) Except for Class A digital devices, for equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table, as measured using a 50 μH/50 ohms line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the band edges. Test procedure according to ANSI C63.4-2014: Each phase and neutral of the AC power line were measured with respect to ground. Measurements were performed using a 50 µH / 50 Ω LISN. The frequency range from 150kHz to 30MHz was searched. The six highest EUT emissions relative to the limit were noted. The EUT is regarded as floor standing equipment and no isolating plane was used since the EUT is already provided with isolating material (of max 12mm height) underneath. The EUT was positioned at least 40cm from a vertical ground reference plane and at least 80cm from the LISN. 3.3.5 Test deviation There is no deviation with the original standard 3.3.6 Test results Test conditions Ambient temperature 22.7 Relative humidity (%) 57.6 (0C) Air pressure (hPa) --- Test location Leek 47 CFR Part 15 (10-1- Applied Standard(s) 17 Edition), ICES-003, January 2016) Test engineer T.E.T. Koning Test result Pass Test date Sept. 10, 2018 Signature Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 27 von 32 Test report No: 18062201.f01 Page 27 of 32 3.3.6.1 Results 2.4 GHz WiFi Mode Results and limits Neutral Frequency Quasi peak detector Average detector (MHz) Result Limit Margin Result Limit Margin 0.26 40.0 61.4 21.5 30.0 51.4 21.4 0.42 30.7 57.5 26.8 18.8 47.5 28.7 3.64 34.4 56.0 21.6 27.7 46.0 18.3 4.43 27.4 56.0 28.6 20.3 46.0 25.7 6.02 27.8 60.0 32.2 21.0 50.0 29.0 22.33 30.0 60.0 30.0 19.9 50.0 30.2 Table 5 Results Conducted Emission 0.15 - 30 MHz Results and limits L1 Frequency Quasi peak detector Average detector (MHz) Result Limit Margin Result Limit Margin 0.26 39.9 61.4 21.5 30.0 51.4 21.4 0.42 30.7 57.5 26.7 18.5 47.5 29.0 3.64 35.4 56.0 20.6 27.2 46.0 18.8 4.43 29.2 56.0 26.8 21.5 46.0 24.5 6.02 29.9 60.0 30.1 23.3 50.0 26.7 22.33 24.8 60.0 35.2 16.1 50.0 33.9 Table 6 Results Conducted Emission 0.15 - 30 MHz Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 28 von 32 Test report No: 18062201.f01 Page 28 of 32 3.3.6.2 Results 5 GHz WiFi Mode and BT Mode Results and limits Neutral Frequency Quasi peak detector Average detector (MHz) Result Limit Margin Result Limit Margin 0.26 40.7 61.4 20.7 24.3 51.4 27.2 0.43 33.1 57.3 24.2 16.8 47.3 30.5 3.53 29.5 56.0 26.6 22.6 46.0 23.4 4.54 24.6 56.0 31.5 18.7 46.0 27.3 5.62 26.4 60.0 33.6 20.3 50.0 29.7 22.30 27.8 60.0 32.2 15.6 50.0 34.4 Table 7 Results Conducted Emission 0.15 - 30 MHz Results and limits L1 Frequency Quasi peak detector Average detector (MHz) Result Limit Margin Result Limit Margin 0.26 41.3 61.4 20.2 23.7 51.4 27.7 0.43 40.4 57.3 16.8 18.9 47.3 28.4 3.53 28.4 56.0 27.7 22.9 46.0 23.1 4.54 24.4 56.0 31.7 19.1 46.0 26.9 5.62 27.6 60.0 32.4 21.3 50.0 28.7 22.30 21.7 60.0 38.3 12.4 50.0 37.6 Table 8 Results Conducted Emission 0.15 - 30 MHz The results of the AC power line conducted emission tests, carried out in accordance with 47 CFR Part 15 section 15.107 and ICES-003 Section 6.1, at the 120 Volts AC mains connection terminals of Aux2 of the system, are depicted in Table 4. Maximum values were recorded. The system is tested as in whole, so with all equipment as shown in Figure 1 in place and functioning. Being the worst case situation. Notes: 1. Measurement uncertainty is 3.2dB 2. The resolution bandwidth used was 9 kHz. 3. The six highest values relative to the applicable limits were noted. 4. Photo and Graphical Display is provided on the next page. Used Equipment A00726 A01978 A00022 A00354 A00093 Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 29 von 32 Test report No: 18062201.f01 Page 29 of 32 3.3.6.3 Photograph test setup Photo 5: Photograph conducted emissions 0.15-30 MHz Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 30 von 32 Test report No: 18062201.f01 Page 30 of 32 3.3.6.4 Spectrum plot 2.4 GHz Mode Plot 7: Pre-scan plot with peak detector. Conducted emissions from 0.15 - 30 MHz. Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 31 von 32 Test report No: 18062201.f01 Page 31 of 32 3.3.6.5 Spectrum plot 5 GHz Mode and BT Mode Plot 8: Pre-scan plot with peak detector. Conducted emissions from 0.15 - 30 MHz. Rev.:01

Produkte Products Prufbericht-Nr: 18062201.f01 Seite 32 von 32 Test report No: 18062201.f01 Page 32 of 32 END OF THIS EMC TESTREPORT Rev.:01


Document Created: 2018-09-12 16:22:57
Document Modified: 2018-09-12 16:22:57
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC