N6C-SDMAC

FCC ID

Equipment: Embeded wireless module

Silex Technology, Inc. -SDMAC

2-3-1 Hikaridai,Seika-cho Sourakugun, Kyoto, N/A 619-0237 Japan

Application
Frequency Range
Final Action Date
Granted
4/E5Ov3EjokW6uQFVfhdaQ==
5180.0-5240.0
2018-11-07
APPROVED
4/E5Ov3EjokW6uQFVfhdaQ==
5260.0-5320.0
2018-11-07
APPROVED
4/E5Ov3EjokW6uQFVfhdaQ==
5500.0-5700.0
2018-11-07
APPROVED
4/E5Ov3EjokW6uQFVfhdaQ==
5745.0-5825.0
2018-11-07
APPROVED
sjpEU0y53MFiVDOJL61IsA==
5180.0-5240.0
2018-09-21
APPROVED
sjpEU0y53MFiVDOJL61IsA==
5260.0-5320.0
2018-09-21
APPROVED
sjpEU0y53MFiVDOJL61IsA==
5500.0-5700.0
2018-09-21
APPROVED
sjpEU0y53MFiVDOJL61IsA==
5745.0-5825.0
2018-09-21
APPROVED
KCjPhx079w7F8PyhgMB8hg==
2402.0-2480.0
2018-09-21
APPROVED
KCjPhx079w7F8PyhgMB8hg==
2412.0-2462.0
2018-09-21
APPROVED
9YAd+yP2Dp6gj5aQyGS9Tw==
2402.0-2480.0
2018-09-21
APPROVED
eDvNkgZ5qX/1KieZvyprow==
5180.0-5240.0
2018-06-29
APPROVED
eDvNkgZ5qX/1KieZvyprow==
5260.0-5320.0
2018-06-29
APPROVED
eDvNkgZ5qX/1KieZvyprow==
5500.0-5700.0
2018-06-29
APPROVED
eDvNkgZ5qX/1KieZvyprow==
5745.0-5825.0
2018-06-29
APPROVED
F5qDrgG4sKXLJNvLAX6gUw==
2402.0-2480.0
2018-06-29
APPROVED
F5qDrgG4sKXLJNvLAX6gUw==
2412.0-2462.0
2018-06-29
APPROVED
lnJf416kThwaL3Qtk5s6dg==
2402.0-2480.0
2018-06-29
APPROVED
kTd92yknnOaYZr+dUL85dQ==
5180.0-5240.0
2018-04-27
APPROVED
kTd92yknnOaYZr+dUL85dQ==
5260.0-5320.0
2018-04-27
APPROVED
kTd92yknnOaYZr+dUL85dQ==
5500.0-5700.0
2018-04-27
APPROVED
kTd92yknnOaYZr+dUL85dQ==
5745.0-5825.0
2018-04-27
APPROVED
lnDPEkycE5o4Ek9ETm0fDg==
2402.0-2480.0
2018-04-27
APPROVED
lnDPEkycE5o4Ek9ETm0fDg==
2412.0-2462.0
2018-04-27
APPROVED
w4mypi0VmFhh3jg9qx3PTQ==
2402.0-2480.0
2018-04-27
APPROVED
hO971HctdSToaMXZXuF/YA==
5180.0-5240.0
2018-03-08
APPROVED
hO971HctdSToaMXZXuF/YA==
5260.0-5320.0
2018-03-08
APPROVED
hO971HctdSToaMXZXuF/YA==
5500.0-5700.0
2018-03-08
APPROVED
hO971HctdSToaMXZXuF/YA==
5745.0-5825.0
2018-03-08
APPROVED
Umz9OX62Pb4Kfi5pYYEpFw==
2402.0-2480.0
2018-03-08
APPROVED
Umz9OX62Pb4Kfi5pYYEpFw==
2412.0-2462.0
2018-03-08
APPROVED
ECQUkZSbRjLC4eDNaZ5fCw==
2402.0-2480.0
2018-03-08
APPROVED
rZY9ywgkqqggdFHg4pks9Q==
5180.0-5240.0
2017-12-21
APPROVED
rZY9ywgkqqggdFHg4pks9Q==
5260.0-5320.0
2017-12-21
APPROVED
rZY9ywgkqqggdFHg4pks9Q==
5500.0-5700.0
2017-12-21
APPROVED
rZY9ywgkqqggdFHg4pks9Q==
5745.0-5825.0
2017-12-21
APPROVED
PH2ft4IhDtqd2Nqdae1IoA==
2412.0-2462.0
2017-12-21
APPROVED
r6vceS/orWWoML7P18drzA==
5180.0-5240.0
2017-09-29
APPROVED
r6vceS/orWWoML7P18drzA==
5260.0-5320.0
2017-09-29
APPROVED
r6vceS/orWWoML7P18drzA==
5500.0-5700.0
2017-09-29
APPROVED
r6vceS/orWWoML7P18drzA==
5745.0-5825.0
2017-09-29
APPROVED
Dleb+SxM8tS4vB9bjqVsRw==
2412.0-2462.0
2017-09-29
APPROVED
iFoHTJq09PxraZoC1tKs4Q==
2402.0-2480.0
2016-11-08
APPROVED
iFoHTJq09PxraZoC1tKs4Q==
2412.0-2462.0
2016-11-08
APPROVED
9gEBFZ1+k0CjARMqpRXjNg==
5180.0-5320.0
2016-11-08
APPROVED
9gEBFZ1+k0CjARMqpRXjNg==
5500.0-5700.0
2016-11-08
APPROVED
9gEBFZ1+k0CjARMqpRXjNg==
5745.0-5825.0
2016-11-08
APPROVED
qZwRuHwKKRiqt8uQXz3xKg==
2402.0-2480.0
2016-11-08
APPROVED
File NameDocument TypeDateDirect
Internal PhotosInternal Photos 2019-04-02 00:00:00 pdf
Test Report_DFS MasterTest Report 2018-11-07 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-04-02 00:00:00 pdf
External PhotosExternal Photos 2019-04-02 00:00:00 pdf
Request for LT or STC confidentiality FCCCover Letter(s) 2018-11-07 00:00:00 pdf
Declaration of authorizationCover Letter(s) 2018-11-07 00:00:00 pdf
DTS-UNII Declaration letterCover Letter(s) 2018-11-07 00:00:00 pdf
Class II permissive change letterCover Letter(s) 2018-11-07 00:00:00 pdf
1805RSU033-UTTest Setup Photos 2018-09-21 00:00:00 pdf
Annex E Equipment Calibration ReportRF Exposure Info 2018-09-21 00:00:00 pdf
1805RSU033-U2-FCC SAR Test Report Rev2Parts List/Tune Up Info 2018-09-21 00:00:00 pdf
Label and Label Location rev2ID Label/Location Info 2018-09-21 00:00:00 pdf
1805RSU033-UEInternal Photos 2018-09-21 00:00:00 pdf
Host Model Declaration LetterCover Letter(s) 2018-09-21 00:00:00 pdf
Honeywell_SX-SDMAC_Authorization_Letter_FCC_C2PC_Lower_Power_SAR_r1Cover Letter(s) 2018-09-21 00:00:00 pdf
FCC Module Approval cover letterCover Letter(s) 2018-09-21 00:00:00 pdf
FCC Declaration of authorizationCover Letter(s) 2018-09-21 00:00:00 pdf
FCC Confidentiality LetterCover Letter(s) 2018-09-21 00:00:00 pdf
FCC C2PC LetterCover Letter(s) 2018-09-21 00:00:00 pdf
1805RSU033-U3-FCC-DTS Test Report Rev2Test Report 2018-09-21 00:00:00 pdf
EUT and Antenna PhotosExternal Photos 2018-06-29 00:00:00 pdf
NII Test ReportTest Report 2018-06-29 00:00:00 pdf
C2PC LetterCover Letter(s) 2018-06-29 00:00:00 pdf
Product Certification Representative Auth LetterCover Letter(s) 2018-06-29 00:00:00 pdf
DTS Test Report (WiFi)Test Report 2018-06-29 00:00:00 pdf
DTS Test Report (BLE)Test Report 2018-06-29 00:00:00 pdf
DSS Test ReportTest Report 2018-06-29 00:00:00 pdf
Module and Antenna PhotosInternal Photos 2018-04-27 00:00:00 pdf
Class II Permissive Change LetterCover Letter(s) 2018-04-27 00:00:00 pdf
DTS WiFi Test ReportTest Report 2018-04-27 00:00:00 pdf
DTS BLE Test ReportTest Report 2018-04-27 00:00:00 pdf
Test ReportTest Report 2018-03-08 00:00:00 pdf
Class II Permissive ChangeCover Letter(s) 2018-03-08 00:00:00 pdf
Test Report_BLETest Report 2018-03-08 00:00:00 pdf
Test Report_WLANTest Report 2018-03-08 00:00:00 pdf
Test Setup Photos_BLETest Setup Photos 2018-03-08 00:00:00 pdf
Test Setup Photos_WLANTest Setup Photos 2018-03-08 00:00:00 pdf
MPE CalculationRF Exposure Info 2017-12-21 00:00:00 pdf
DTS Test ReportTest Report 2017-12-21 00:00:00 pdf
NII Test Report Part 2Test Report 2017-09-29 00:00:00 pdf
NII Test Report Part 1Test Report 2017-09-29 00:00:00 pdf
(Short-Term Confidential) User ManualUsers Manual 2017-05-08 00:00:00 pdf
(Short-Term Confidential) Internal PhotoInternal Photos 2017-05-08 00:00:00 pdf
(Short-Term Confidential) External PhotoExternal Photos 2017-05-08 00:00:00 pdf
(Short term confidential) FCC Test Setup Photo_NIITest Setup Photos 2017-05-08 00:00:00 pdf
(Short term confidential) FCC DFS Setup PhotoTest Setup Photos 2017-05-08 00:00:00 pdf
Label and LocationID Label/Location Info 2016-11-08 00:00:00 pdf
FCC Test Report_NIITest Report 2016-11-08 00:00:00 pdf
FCC RF Exposure_NIIRF Exposure Info 2016-11-08 00:00:00 pdf
FCC DFS ReportTest Report 2016-11-08 00:00:00 pdf
FCC Request for Short-term Confidentiality LetterCover Letter(s) 2016-11-08 00:00:00 pdf
FCC Request for Confidentiality LetterCover Letter(s) 2016-11-08 00:00:00 pdf
FCC MA LetterCover Letter(s) 2016-11-08 00:00:00 pdf
FCC Declaration of Professional Installation (software)Cover Letter(s) 2016-11-08 00:00:00 pdf
FCC Authorization LetterCover Letter(s) 2016-11-08 00:00:00 pdf
(Short term confidential) FCC Test Setup Photo_DTSTest Setup Photos 2017-05-08 00:00:00 pdf
FCC Test Report_DTSTest Report 2016-11-08 00:00:00 pdf
FCC RF Exposure_DTSRF Exposure Info 2016-11-08 00:00:00 pdf
(Short term confidential) FCC Test Setup Photo_DSSTest Setup Photos 2017-05-08 00:00:00 pdf
FCC Test Report_DSSTest Report 2016-11-08 00:00:00 pdf
FCC RF Exposure_DSSRF Exposure Info 2016-11-08 00:00:00 pdf
Operational DescriptionOperational Description N/A
Software security declarationOperational Description N/A
Inquire Tracking Number 859776Operational Description N/A
(Confidential) Parts ListParts List/Tune Up Info N/A
(Confidential) SchematicsSchematics N/A
(Confidential) Block DiagramBlock Diagram N/A
(Confidential) Theory of Operation-Antenna listOperational Description N/A
(Confidential) Theory of Operation-Channel listOperational Description N/A
(Confidential) Theory of Operation-SpecificationOperational Description N/A
(Confidential) Theory of Operation-Software SecurityOperational Description N/A
(Confidential) Theory of Operation-Interface SpecificationOperational Description N/A
(Confidential) Theory of Operation-Antenna Specification_146153Operational Description N/A
(Confidential) Theory of Operation-Antenna Specification_H2U84W1H1SOperational Description N/A

Application Details:

EquipmentEmbeded wireless module
FRN0013616305
Grantee CodeN6C
Product Code-SDMAC
Applicant BusinessSilex Technology, Inc.
Business Address2-3-1 Hikaridai,Seika-cho Sourakugun , Kyoto,N/A Japan 619-0237
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantToshiro Kometani – Manager
Applicant Phone
Applicant Fax81 774-98-3767
Applicant Email[email protected]
Applicant MailStop
Test FirmSGS Taiwan Ltd. Electronics & Communication Lab
Test Firm ContactWillis Chen
Test Firm Phone 1475
Test Firm Fax+886-2-2299-2248
Test Firm Email[email protected]
Certified ByToshiro Kometani – General Manager
Comment [4/E5Ov3EjokW6uQFVfhdaQ==]: Class 2 Permissive Change : (1) Firmware is modified to enable function of Radar Detection. (2) To add antennas with the same types and lower gain values. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01.
Comment [9gEBFZ1+k0CjARMqpRXjNg==]: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection.
Comment [9YAd+yP2Dp6gj5aQyGS9Tw==]: Class II Permissive Change for using in the portable host of thermal printer. Output power is conducted. Single Modular Approval. This device and associated FCC ID label(s) are to be installed in the specific thermal printer shown in this filing only by OEM or OEM integrators - user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device and its antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. This module contains BLE, 2.4G WLAN and 5G WLAN transmitters.
Comment [Dleb+SxM8tS4vB9bjqVsRw==]: C2PC Bluetooth Disabled. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and endusers must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be colocated or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions
Comment [ECQUkZSbRjLC4eDNaZ5fCw==]: C2PC: Adding different antenna types, which are described in the filling. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Comment [eDvNkgZ5qX/1KieZvyprow==]: C2PC to add Taoglas FXP840.07.0055B Monopole Antenna. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection.
Comment [F5qDrgG4sKXLJNvLAX6gUw==]: C2PC to add Taoglas FXP840.07.0055B Monopole Antenna. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Comment [hO971HctdSToaMXZXuF/YA==]: C2PC: Adding different antenna types, which are described in the filling. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection.
Comment [iFoHTJq09PxraZoC1tKs4Q==]: Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Comment [KCjPhx079w7F8PyhgMB8hg==]: Class II Permissive Change for using in the portable host of thermal printer. Output power is conducted. Single Modular Approval. This device and associated FCC ID label(s) are to be installed in the specific thermal printer shown in this filing only by OEM or OEM integrators - user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device and its antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 1.24 W/kg and 1.28 W/kg, respectively. This module has 20 MHz and 40 MHz bandwidth modes. This module contains Bluetooth and 5G WLAN transmitters.
Comment [kTd92yknnOaYZr+dUL85dQ==]: C2PC to add Ethertronics Antenna models: 1004075, 1004078. Original grant comment: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection.
Comment [lnDPEkycE5o4Ek9ETm0fDg==]: C2PC to add Ethertronics Antenna models: 1004075, 1004078. Original grant comment: Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Comment [lnJf416kThwaL3Qtk5s6dg==]: C2PC to add Taoglas FXP840.07.0055B Monopole Antenna Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Comment [PH2ft4IhDtqd2Nqdae1IoA==]: C2PC to add an Antenna Factor: ant-db1-raf-rps antenna. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Comment [qZwRuHwKKRiqt8uQXz3xKg==]: Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Comment [r6vceS/orWWoML7P18drzA==]: C2PC Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection.
Comment [rZY9ywgkqqggdFHg4pks9Q==]: C2PC to add an Antenna Factor: ant-db1-raf-rps antenna. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection.
Comment [sjpEU0y53MFiVDOJL61IsA==]: Class II Permissive Change for using in the portable host of thermal printer. Output power is conducted. Single Modular Approval. This device and associated FCC ID label(s) are to be installed in the specific thermal printer shown in this filing only by OEM or OEM integrators - user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device and its antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 0.52 W/kg and 1.28 W/kg, respectively. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This module contains Bluetooth, BLE and 2.4G WLAN transmitters.
Comment [Umz9OX62Pb4Kfi5pYYEpFw==]: C2PC: Adding different antenna types, which are described in the filling. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.
Comment [w4mypi0VmFhh3jg9qx3PTQ==]: C2PC to add Ethertronics Antenna models: 1004075, 1004078. Original grant comment: Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC