LDKESW6300

FCC ID

Equipment: 802.11ac Dual Band Outdoor Access Point

Cisco Systems Inc ESW6300

125 West Tasman Drive, San Jose, CA 95134-1706 United States

Application
Frequency Range
Final Action Date
Granted
ZO4KVKXli/yL0KpCgUH0BA==
5180.0-5240.0
2019-08-08
APPROVED
ZO4KVKXli/yL0KpCgUH0BA==
5260.0-5320.0
2019-08-08
APPROVED
ZO4KVKXli/yL0KpCgUH0BA==
5550.0-5720.0
2019-08-08
APPROVED
ZO4KVKXli/yL0KpCgUH0BA==
5745.0-5825.0
2019-08-08
APPROVED
JnBfiNL5T74gcUCTAlNLsw==
2412.0-2462.0
2019-08-08
APPROVED
File NameDocument TypeDateDirect
LabelID Label/Location Info 2019-08-08 00:00:00 pdf
Cover LetterCover Letter(s) 2019-08-08 00:00:00 pdf
ExtExternal Photos 2019-08-08 00:00:00 pdf

Application Details:

Equipment802.11ac Dual Band Outdoor Access Point
FRN0004968939
Grantee CodeLDK
Product CodeESW6300
Applicant BusinessCisco Systems Inc
Business Address125 West Tasman Drive , San Jose,California United States 95134-1706
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantGerard Thorpe – Manager, Engineering
Applicant Phone
Applicant Fax408-527-7097
Applicant Email[email protected]
Applicant MailStop
Test FirmTUV Rheinland of North America Inc.
Test Firm ContactDavid Spencer
Test Firm Phone
Test Firm Fax925 249 9124
Test Firm Email[email protected]
Certified ByAdam – Walb
Comment [JnBfiNL5T74gcUCTAlNLsw==]: Output power is maximum combined EiRP. This device is capable of 3x3 MIMO operation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Comment [ZO4KVKXli/yL0KpCgUH0BA==]: This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device is capable of 3x3 MIMO operation. Output power is maximum combined conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC