B94-RTL8822CEDL

FCC ID

Equipment: 802.11 a/b/g/n/ac RTL8822CE Combo Module

HP Inc. -RTL8822CEDL

3390 East Harmony Road, Fort Collins, CO 80528 United States

Application
Frequency Range
Final Action Date
Granted
SiF1RvDiCWcJXOFlgjE+5w==
2402.0-2480.0
2020-03-03
APPROVED
+/11vdlxsrWLQs5nDz+pdg==
5180.0-5240.0
2020-03-03
APPROVED
+/11vdlxsrWLQs5nDz+pdg==
5260.0-5320.0
2020-03-03
APPROVED
+/11vdlxsrWLQs5nDz+pdg==
5500.0-5720.0
2020-03-03
APPROVED
+/11vdlxsrWLQs5nDz+pdg==
5745.0-5825.0
2020-03-03
APPROVED
0AjLxVisS8iF4ZaB3l++kA==
2402.0-2480.0
2020-03-03
APPROVED
0AjLxVisS8iF4ZaB3l++kA==
2412.0-2472.0
2020-03-03
APPROVED
KC3saECs2ZVY//E5iimN6g==
5180.0-5240.0
2020-01-31
APPROVED
KC3saECs2ZVY//E5iimN6g==
5260.0-5320.0
2020-01-31
APPROVED
KC3saECs2ZVY//E5iimN6g==
5500.0-5720.0
2020-01-31
APPROVED
KC3saECs2ZVY//E5iimN6g==
5745.0-5825.0
2020-01-31
APPROVED
rzquQUmyJkhxwaIxLslAFQ==
2402.0-2480.0
2020-01-31
APPROVED
rzquQUmyJkhxwaIxLslAFQ==
2412.0-2472.0
2020-01-31
APPROVED
kJLREbgL3HhzaLghoBVuYw==
2402.0-2480.0
2020-01-31
APPROVED
File NameDocument TypeDateDirect
FCC delegation - RPT to Frances LiangCover Letter(s) 2020-03-03 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2020-03-03 00:00:00 pdf
Test Report_SAR_Appendix CRF Exposure Info 2020-03-03 00:00:00 pdf
Test Report_SAR_Appendix BRF Exposure Info 2020-03-03 00:00:00 pdf
Test Report_SARRF Exposure Info 2020-03-03 00:00:00 pdf
Request for LT or STC confidentialityCover Letter(s) 2020-03-03 00:00:00 pdf
FCC_agent_auth_letterCover Letter(s) 2020-03-03 00:00:00 pdf
FCC CIIPC LetterCover Letter(s) 2020-03-03 00:00:00 pdf
ConfidentialityCover Letter(s) 2020-01-31 00:00:00 pdf
FCCdelegation - RPT to Frances Liang - June 2016Cover Letter(s) 2020-01-31 00:00:00 pdf
FCC_agent_auth_letter_RTL8822CEDL_Cover Letter(s) 2020-01-31 00:00:00 pdf
Original grantee_ FCC Auth Ltr for Change of IDCover Letter(s) 2020-01-31 00:00:00 pdf
New grantee_ FCC Auth Ltr for Change of IDCover Letter(s) 2020-01-31 00:00:00 pdf
External PhotosExternal Photos 2020-07-21 00:00:00 N/A
External photoExternal Photos 2020-08-30 00:00:00 N/A
Internal PhotosInternal Photos 2020-08-30 00:00:00 N/A
Regulatory WLAN Antenna_TB mode_HBOperational Description N/A
Regulatory WLAN Antenna_NB mode_HBOperational Description N/A
Regulatory WLAN Antenna_NB mode_AWANOperational Description N/A
Regulatory WLAN Antenna_TB mode_AWANOperational Description N/A
Regulatory WLAN Antenna_NB module_INPAQOperational Description N/A
Regulatory WLAN Antenna_TB module_INPAQOperational Description N/A
Test Setup Photos_SARTest Setup Photos 2020-08-30 00:00:00 N/A
Users ManualUsers Manual 2020-08-30 00:00:00 N/A
Users Manual_Regulatory NoticesUsers Manual 2020-08-30 00:00:00 N/A

Application Details:

Equipment802.11 a/b/g/n/ac RTL8822CE Combo Module
FRN0025126541
Grantee CodeB94
Product Code-RTL8822CEDL
Applicant BusinessHP Inc.
Business Address3390 East Harmony Road , Fort Collins,Colorado United States 80528
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantRichard P Tarsio – US Canada Technical Regulations
Applicant Phone
Applicant Fax000-000-0000
Applicant Email[email protected]
Applicant MailStopMS 66
Test FirmSGS Taiwan Ltd. Electronics & Communication Lab
Test Firm ContactRyan WANG
Test Firm Phone 1473
Test Firm Fax+886-2-2299-2248
Test Firm Email[email protected]
Certified ByJim Chang – Manager
Comment [+/11vdlxsrWLQs5nDz+pdg==]: Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.13 W/kg and 1.25 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Comment [0AjLxVisS8iF4ZaB3l++kA==]: Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.59 W/kg and 1.02 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
Comment [KC3saECs2ZVY//E5iimN6g==]: Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Comment [kJLREbgL3HhzaLghoBVuYw==]: Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Comment [rzquQUmyJkhxwaIxLslAFQ==]: Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
Comment [SiF1RvDiCWcJXOFlgjE+5w==]: Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body-worn accessory and simultaneous transmission use conditions are <0.1 W/kg, and 1.15 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC