2AMFBLR3N

FCC ID

Equipment: LoRa module

Senceive Limited LR3N

7b-7c Imperial Studios Imperial Road, London, N/A SW6 2AG United Kingdom

Application
Frequency Range
Final Action Date
Granted
nqRukR3BFrsujF4GKNwI3w==
902.3-914.9
2019-08-09
APPROVED
nqRukR3BFrsujF4GKNwI3w==
903.0-914.2
2019-08-09
APPROVED
File NameDocument TypeDateDirect
LabelID Label/Location Info 2019-08-09 00:00:00 pdf
PhotosExternal Photos 2019-08-09 00:00:00 pdf
Original Grantee authorisationCover Letter(s) 2019-08-09 00:00:00 pdf
Letter from new GranteeCover Letter(s) 2019-08-09 00:00:00 pdf
Letter from original GranteeCover Letter(s) 2019-08-09 00:00:00 pdf
Agent authorisationCover Letter(s) 2019-08-09 00:00:00 pdf

Application Details:

EquipmentLoRa module
FRN0026594069
Grantee Code2AMFB
Product CodeLR3N
Applicant BusinessSenceive Limited
Business Address7b-7c Imperial Studios Imperial Road, London,N/A United Kingdom SW6 2AG
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMark Ferris –
Applicant Phone
Applicant Fax+44 207 731 8269
Applicant Email[email protected]
Applicant MailStop
Test FirmSGS-CSTC Standards Technical Services Co.,Ltd.
Test Firm ContactLola Yuan
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByCharlie Blackham – Director
Comment [nqRukR3BFrsujF4GKNwI3w==]: Power output is conducted at the antenna terminal. Limited Modular Approval; for professional installation by Senceive Ltd. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04 dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125 kHz and 500 kHz bandwidth modes. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided by the original Grantee.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC