|Applicant Business||LG Innotek Co., Ltd.|
|Business Address||26, Hanamsandan 5beon-ro Gwangsan-gu , Gwangju,N/A South Korea 506-731|
|TCB Scope||B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27|
|TCB Email||[email protected]|
|Applicant||Jeong Inchang – Senior Research Engineer |
|Applicant Phone|| |
|Applicant Email||[email protected]|
|Test Firm||SGS Korea Co., Ltd|
|Test Firm Contact||Julia Choi|
|Test Firm Phone|| |
|Test Firm Fax||+82-31-427-2370|
|Test Firm Email||[email protected]|
|Certified By||Hyunchae You – Technical Manager|
Comment [1hLVdzL+bI9Ji8kbwtd6xA==]: Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations, the antenna gain, including cable loss, must not exceed 2.0 dBi at 1900 MHz; 2.0 dBi at 1700 MHz; 4.5dBi at 850 MHz; 2.0 dBi at 2500MHz; 4.5 dBi at 700MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.
This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2 and 4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 5 and 12; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7; 5 MHz and 10 MHz bandwidth modes for LTE Band 17.