|Equipment||LTE wireless module for IoT applications|
|Applicant Business||Telit Communications S.p.A.|
|Business Address||Viale Stazione di Prosecco 5/b , Trieste,N/A Italy 34010|
|TCB Scope||A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices|
|TCB Email||[email protected]|
|Applicant||Ken Bednasz – VP Application Engineering - Americas |
|Applicant Phone|| 1104|
|Applicant Email||[email protected]|
|Test Firm||DEKRA Certification, Inc.|
|Test Firm Contact||Jose Fernandez|
|Test Firm Phone|| |
|Test Firm Fax|
|Test Firm Email||[email protected]|
|Certified By||Ken Bednasz – VP Application Engineer|
Comment [MP7jKj19o7A236F4UICNFg==]: Output power listed is conducted.
Single Modular approval.
This grant is valid only when the module is sold to OEM integrators.
The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.
The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.