QXO-AP510I

FCC ID

Equipment: 802.11ax Access Point

Extreme Networks, Inc. -AP510I

6480 Via Del Oro, San Jose, CA 95119 United States

Application
Frequency Range
Final Action Date
Granted
8RVaUHpOGJ0DYUQykd2ngA==
5180.0-5250.0
2019-09-10
APPROVED
8RVaUHpOGJ0DYUQykd2ngA==
5250.0-5320.0
2019-09-10
APPROVED
8RVaUHpOGJ0DYUQykd2ngA==
5500.0-5720.0
2019-09-10
APPROVED
8RVaUHpOGJ0DYUQykd2ngA==
5745.0-5825.0
2019-09-10
APPROVED
sVkALs1uqOd0lEtGtgFHUQ==
2402.0-2480.0
2019-09-10
APPROVED
sVkALs1uqOd0lEtGtgFHUQ==
2405.0-2480.0
2019-09-10
APPROVED
sVkALs1uqOd0lEtGtgFHUQ==
2412.0-2462.0
2019-09-10
APPROVED
cFl8EharD7Q0B/zp3JTfRw==
2402.0-2480.0
2019-07-23
APPROVED
cFl8EharD7Q0B/zp3JTfRw==
2405.0-2480.0
2019-07-23
APPROVED
cFl8EharD7Q0B/zp3JTfRw==
2412.0-2462.0
2019-07-23
APPROVED
j+lvy7OvwN6zNPqnS8Wt+Q==
5180.0-5250.0
2019-07-23
APPROVED
j+lvy7OvwN6zNPqnS8Wt+Q==
5250.0-5320.0
2019-07-23
APPROVED
j+lvy7OvwN6zNPqnS8Wt+Q==
5500.0-5720.0
2019-07-23
APPROVED
j+lvy7OvwN6zNPqnS8Wt+Q==
5745.0-5825.0
2019-07-23
APPROVED
rXPINehIZxvbTQkbIRyFQQ==
5180.0-5250.0
2019-04-25
APPROVED
rXPINehIZxvbTQkbIRyFQQ==
5250.0-5320.0
2019-04-25
APPROVED
rXPINehIZxvbTQkbIRyFQQ==
5500.0-5720.0
2019-04-25
APPROVED
rXPINehIZxvbTQkbIRyFQQ==
5745.0-5825.0
2019-04-25
APPROVED
PNVwd4pxjJQvyd7V5y4/Cg==
5180.0-5240.0
2019-04-15
APPROVED
PNVwd4pxjJQvyd7V5y4/Cg==
5745.0-5825.0
2019-04-15
APPROVED
Tl4n3CzCLsczYWFKP8w7Mg==
2402.0-2480.0
2019-04-15
APPROVED
Tl4n3CzCLsczYWFKP8w7Mg==
2405.0-2480.0
2019-04-15
APPROVED
Tl4n3CzCLsczYWFKP8w7Mg==
2412.0-2462.0
2019-04-15
APPROVED
a5XiGnfDdOetjKZ1DbrSwA==
5180.0-5240.0
2019-01-30
APPROVED
a5XiGnfDdOetjKZ1DbrSwA==
5745.0-5825.0
2019-01-30
APPROVED
c71pxtC1EkuRIrtWt8/SWw==
2402.0-2480.0
2019-01-30
APPROVED
c71pxtC1EkuRIrtWt8/SWw==
2405.0-2480.0
2019-01-30
APPROVED
c71pxtC1EkuRIrtWt8/SWw==
2412.0-2462.0
2019-01-30
APPROVED
File NameDocument TypeDateDirect
POACover Letter(s) 2019-09-10 00:00:00 pdf
SAR ReportRF Exposure Info 2019-09-10 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2019-09-10 00:00:00 pdf
C2PC LetterCover Letter(s) 2019-09-10 00:00:00 pdf
TPC Declaration LetterCover Letter(s) 2019-07-23 00:00:00 pdf
SAR Test ReportCover Letter(s) 2019-07-23 00:00:00 pdf
Exepedited Review LetterCover Letter(s) 2019-07-23 00:00:00 pdf
Confidential LetterCover Letter(s) 2019-07-23 00:00:00 pdf
WLAN 5GHz_Test ReportTest Report 2019-07-23 00:00:00 pdf
Expedited Review LetterCover Letter(s) 2019-04-25 00:00:00 pdf
Test Report_DFSTest Report 2019-04-25 00:00:00 pdf
Test Report_NII-4Test Report 2019-04-25 00:00:00 pdf
Test Report_NII-3Test Report 2019-04-25 00:00:00 pdf
Test Report_NII-2Test Report 2019-04-25 00:00:00 pdf
Test Report_NII-1Test Report 2019-04-25 00:00:00 pdf
RF Exposure InformationRF Exposure Info 2019-04-25 00:00:00 pdf
Declaration LetterCover Letter(s) 2019-04-25 00:00:00 pdf
C2PC Request LetterCover Letter(s) 2019-04-25 00:00:00 pdf
ID Label and LocationID Label/Location Info 2019-04-15 00:00:00 pdf
Test Report_ThreadTest Report 2019-04-15 00:00:00 pdf
Test Report_BLETest Report 2019-04-15 00:00:00 pdf
Test Report_WiFiTest Report 2019-04-15 00:00:00 pdf
User ManualUsers Manual 2019-07-30 00:00:00 pdf
Test Setup Photos_NIITest Setup Photos 2019-07-30 00:00:00 pdf
Internal PhotosInternal Photos 2019-07-30 00:00:00 pdf
External PhotosExternal Photos 2019-07-30 00:00:00 pdf
Test Report_WiFi-2Test Report 2019-01-30 00:00:00 pdf
Test Report_WiFi-1Test Report 2019-01-30 00:00:00 pdf
Test Setup Photos_ThreadTest Setup Photos 2019-07-30 00:00:00 pdf
Test Setup Photos_WiFiTest Setup Photos 2019-07-30 00:00:00 pdf
Test Setup Photos_BLETest Setup Photos 2019-07-30 00:00:00 pdf
Test Setup Photos SARTest Setup Photos 2020-03-08 00:00:00 N/A
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A
Operational Description_Software SecurityOperational Description N/A
SchematicsSchematics N/A
Test Photo_SARTest Setup Photos 2020-01-19 00:00:00 N/A
Software Security RequirementsSDR Software/Security Inf N/A
Test Photo_WLAN 5GHzTest Setup Photos 2020-01-19 00:00:00 N/A
Test Setup Photos_5GTest Setup Photos 2019-10-13 00:00:00 N/A
Operational Description_software securitySDR Software/Security Inf N/A
Test Setup Photos_DFSTest Setup Photos 2019-10-23 00:00:00 N/A
Test Setup Photos_2.4GTest Setup Photos 2019-10-13 00:00:00 N/A

Application Details:

Equipment802.11ax Access Point
FRN0019588359
Grantee CodeQXO
Product Code-AP510I
Applicant BusinessExtreme Networks, Inc.
Business Address6480 Via Del Oro , San Jose,California United States 95119
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantThomas Whissel – Regulatory Compliance Manager
Applicant Phone
Applicant Fax1-603-952-5861
Applicant Email[email protected]
Applicant MailStop
Test FirmSporton International Inc.
Test Firm ContactAlex Chen
Test Firm Phone
Test Firm Fax+886-3-327-0978
Test Firm Email[email protected]
Certified ByLeo Huang – Manager
Comment [8RVaUHpOGJ0DYUQykd2ngA==]: Class II Permissive Change: Adds under-seat stadium mounting scheme. Output Power listed is the maximum combined conducted output power. SAR compliance for body-proximate operating configurations is limited to installations that cause the device to operate with a minimum separation distance of 2.5 cm from any person, as described in this filing. Installers must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body proximate and simultaneous transmission exposure conditions are 1.12 W/kg and 1.17 W/kg, respectively. This device supports 20, 40, 80 and 160 MHz modes.
Comment [a5XiGnfDdOetjKZ1DbrSwA==]: Output power listed is conducted. This device has 20 MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26 cm from all persons.
Comment [c71pxtC1EkuRIrtWt8/SWw==]: Output power listed is conducted. This device has 20 MHz and 40MHz bandwidth modes. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26 cm from all persons.
Comment [cFl8EharD7Q0B/zp3JTfRw==]: Output power listed is conducted. This device has 20 MHz and 40MHz bandwidth modes. This device must be professionally installed. The highest reported SAR for extremity (10g SAR), and simultaneous (10g SAR) transmission exposure conditions are 0.58 W/kg and 2.62 W/kg, respectively.
Comment [j+lvy7OvwN6zNPqnS8Wt+Q==]: Output power listed is conducted. This device has 20 MHz, 40MHz, 80MHz, and 160MHz bandwidth modes. This device must be professionally installed. The highest reported SAR for extremity (10g SAR), and simultaneous (10g SAR) transmission exposure conditions are 2.89 W/kg and 3.25 W/kg, respectively.
Comment [PNVwd4pxjJQvyd7V5y4/Cg==]: Output power listed is conducted. This device has 20 MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26 cm from all persons. Class II Permissive Change: address the module with below modifications: 1. Adding a model name for AP560i; 2. Adding the outdoor function; 3. Changing the EUT case; 4. Removing USB Port, as documented in this filing.
Comment [rXPINehIZxvbTQkbIRyFQQ==]: Output power listed is conducted. This device has 20 MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26 cm from all persons. Class II Permissive Change: address this device with below modifications: 1. Adding U-NII-2A and U-NII-2C bands, and 2. Adding 160MHz bandwidth; as documented in this filing.
Comment [sVkALs1uqOd0lEtGtgFHUQ==]: Class II Permissive Change: Adds under-seat stadium mounting scheme. Output Power listed is the maximum combined conducted output power. SAR compliance for body-proximate operating configurations is limited to installations that cause the device to operate with a minimum separation distance of 2.5 cm from any person, as described in this filing. Installers must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body proximate and simultaneous transmission exposure conditions are 0.42 W/kg and 1.17 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.
Comment [Tl4n3CzCLsczYWFKP8w7Mg==]: Output power listed is conducted. This device has 20 MHz and 40MHz bandwidth modes. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26 cm from all persons. Class II Permissive Change: address the module with below modifications: 1. Adding a model name for AP560i; 2. Adding the outdoor function; 3. Changing the EUT case; 4. Removing USB Port, as documented in this filing.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC