OWS-NIC531-06

FCC ID

Equipment: C2G5 NIC (Network Interface Card)

Itron, Inc -NIC531-06

230 W. Tasman Dr., San Jose, CA 95134 United States

Application
Frequency Range
Final Action Date
Granted
4EfXuxULJtIIz7dbdZaH/g==
902.3-926.9
2019-05-10
APPROVED
ixysr9expvuXDVF7tNaIDQ==
903.2-926.0
2019-05-10
APPROVED
ixysr9expvuXDVF7tNaIDQ==
2405.0-2480.0
2019-05-10
APPROVED
File NameDocument TypeDateDirect
Label and Label LocationID Label/Location Info 2019-05-10 00:00:00 pdf
RF Exposure (MPE)RF Exposure Info 2019-05-10 00:00:00 pdf
Test Report (2.4GHz)Test Report 2019-05-10 00:00:00 pdf
Test Report (900 MHz)Test Report 2019-05-10 00:00:00 pdf
Test Report (FHSS)Test Report 2019-05-10 00:00:00 pdf
User Manual (Declaration)Users Manual 2019-05-10 00:00:00 pdf
Model Declaration LetterAttestation Statements 2019-05-10 00:00:00 pdf
Authorization LetterCover Letter(s) 2019-05-10 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2019-05-10 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-05-10 00:00:00 pdf
Internal PhotosInternal Photos 2019-05-10 00:00:00 pdf
External PhotosExternal Photos 2019-05-10 00:00:00 pdf
Modular Approval LetterAttestation Statements 2019-05-10 00:00:00 pdf
BOM ListParts List/Tune Up Info N/A
SchematicsSchematics N/A
User ManualUsers Manual 2019-05-10 00:00:00 N/A
Block DiagramBlock Diagram N/A
Label DeclarationID Label/Location Info 2019-05-10 00:00:00 N/A
Operational Description 1Operational Description N/A
Operational Description 2Operational Description N/A

Application Details:

EquipmentC2G5 NIC (Network Interface Card)
FRN0017775842
Grantee CodeOWS
Product Code-NIC531-06
Applicant BusinessItron, Inc
Business Address230 W. Tasman Dr. , San Jose,California United States 95134
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantAsim Tirmizi – Regulatory Engineering Manager
Applicant Phone 633
Applicant Fax866-776-0015
Applicant Email[email protected]
Applicant MailStop
Test FirmMiCOM Labs
Test Firm ContactGordon Hurst
Test Firm Phone
Test Firm Fax925-462-0306
Test Firm Email[email protected]
Certified ByAsim Tirmizi – Senior Manager HW Engineering, Itron, Inc.
Comment [4EfXuxULJtIIz7dbdZaH/g==]: Single Modular Approval Output power listed is conducted power. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. The modular transmitter is only approved for use by the grantee in its own products and not intended for sale to third parties.
Comment [ixysr9expvuXDVF7tNaIDQ==]: Single Modular Approval Output power listed is conducted power. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. The modular transmitter is only approved for use by the grantee in its own products and not intended for sale to third parties.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC