RF Exposure (MPE)

FCC ID: OWS-NIC531-06

RF Exposure Info

Download: PDF
FCCID_4270818

MPE/RF EXPOSURE EVALUATION REPORT FROM Evaluation of: Itron Inc NIC 531-0601 to To: FCC CFR 47 Part 15 RF Exposure requirements Test Report Serial No.: ITRO18-U5 Rev A FCC MPE This report supersedes: NONE Applicant: Itron Networked Solutions, Inc. 230 West Tasman Drive San Jose, California 95134 USA Product Function: Plug in radio device, mesh and HAN networks Issue Date: 29th April 2019 This Test Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory

Title: ITRON Inc. NIC 531-0601 To: FCC CFR 47 Part 1.1310 Serial #: ITRO18-U5 Rev A FCC MPE Issue Date: 29th April 2019 Page: 2 of 4 1. MAXIMUM PERMISSABLE EXPOSURE Calculations for Maximum Permissible Exposure Levels 2 2 Power Density = Pd (mW/cm ) = EIRP/(4*π*d ) EIRP = P * G P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) Because the EUT belongs to the General Population/Uncontrolled Exposure the limit of power density is 1 2 mW/cm These calculations represent worst case in terms of the exposure levels for the device. Peak Ant Numeric Peak Calculated Power Power Density Min Calculated safe Freq. Band Output Gain Gain Output Density (mW/cm2) Limit distance for Limit (MHz) Power (dBi) (numeric) Power (mW) @ 20cm (mW/cm2) (cm) (dBm) 902- 928 1.0 1.26 27.70 588.8 0.147 0.6 9.92 (DSSS) 902- 928 1.0 1.26 29.88 972.7 0.244 0.6 12.75 (FHSS) 2400 - 2483.5 0.0 1.0 26.40 436.5 0.09 1.0 5.89 Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. Specification Maximum Permissible Exposure Limits FCC §1.1310 Table 1 (B) Limits for General Population/Uncontrolled Exposure This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

Title: ITRON Inc. NIC 531-0601 To: FCC CFR 47 Part 1.1310 Serial #: ITRO18-U5 Rev A FCC MPE Issue Date: 29th April 2019 Page: 3 of 4 Specification - Maximum Permissible Exposure Limits TABLE 1—LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 2 3.0-30 1842/f 4.89/f *900/f 6 30-300 61.4 0.163 1.0 6 300-1,500 -- -- f/300 6 1,500-100,000 -- -- 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 2 1.34-30 824/f 2.19/f *180/f 30 30-300 27.5 0.073 0.2 30 300-1,500 -- -- f/1500 30 1,500-100,000 -- -- 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

575 Boulder Court Pleasanton, California 94566, USA Tel: +1 (925) 462 0304 Fax: +1 (925) 462 0306 www.micomlabs.com


Document Created: 2019-05-11 00:07:02
Document Modified: 2019-05-11 00:07:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC