HLZ9260NG

FCC ID

Equipment: Intel Dual Band Wireless-AC 9260

Acer Incorporated 9260NG

8F, 88, Sec 1, Hsin Tai Wu Rd, Hsichih, Taipei Hsien, N/A 221 Taiwan

Application
Frequency Range
Final Action Date
Granted
OofMZXcnsVyIt6xsAda+lQ==
-
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5180.0-5240.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5190.0-5230.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5210.0-5210.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5260.0-5320.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5270.0-5310.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5290.0-5290.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5500.0-5700.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5510.0-5670.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5530.0-5690.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5745.0-5825.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5755.0-5795.0
2019-02-11
APPROVED
naybg0oECM8lsZiUiR0CSw==
5775.0-5775.0
2019-02-11
APPROVED
WqLHKFyq43iHAigEAbOhUw==
2402.0-2480.0
2019-02-11
APPROVED
WqLHKFyq43iHAigEAbOhUw==
2412.0-2472.0
2019-02-11
APPROVED
WqLHKFyq43iHAigEAbOhUw==
2422.0-2462.0
2019-02-11
APPROVED
OPas1CVpVvc9otPLWVQDXA==
2402.0-2480.0
2019-02-11
APPROVED
File NameDocument TypeDateDirect
ID Label/Location InfoID Label/Location Info 2019-02-11 00:00:00 pdf
confidentialityCover Letter(s) 2019-02-11 00:00:00 pdf
Declaration of authorizationCover Letter(s) 2019-02-11 00:00:00 pdf
Original granteeFCC Auth Ltr for Change of ID_9260NGWCover Letter(s) 2019-02-11 00:00:00 pdf
New grantee FCC Auth Ltr for Change of IDCover Letter(s) 2019-02-11 00:00:00 pdf
Authorization LetterCover Letter(s) 2019-02-11 00:00:00 pdf
Original granteeFCC Auth Ltr for Change of IDCover Letter(s) 2019-02-11 00:00:00 pdf
Users ManualUsers Manual 2019-07-31 00:00:00 N/A
External PhotosExternal Photos 2019-07-31 00:00:00 N/A
External photoExternal Photos 2019-07-31 00:00:00 N/A

Application Details:

EquipmentIntel Dual Band Wireless-AC 9260
FRN0013355508
Grantee CodeHLZ
Product Code9260NG
Applicant BusinessAcer Incorporated
Business Address8F, 88, Sec 1, Hsin Tai Wu Rd , Hsichih, Taipei Hsien,N/A Taiwan 221
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantHarriot S.L. Lee – Manager
Applicant Phone 3811
Applicant Fax886-2-2696-3535
Applicant Email[email protected]
Applicant MailStop
Test FirmIntel Corporation S.A.S.
Test Firm ContactNawfal ASRIH
Test Firm Phone
Test Firm Fax0033493001401
Test Firm Email[email protected]
Certified ByRU Jan – Manager
Comment [naybg0oECM8lsZiUiR0CSw==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [OPas1CVpVvc9otPLWVQDXA==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [WqLHKFyq43iHAigEAbOhUw==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC