GU6-60SIPT

FCC ID

Equipment: Digital Modulation System

Avery Dennison Retail Information Services, LLC -60SIPT

170 Monarch Lane, Miamisburg, OH 45342 United States

Application
Frequency Range
Final Action Date
Granted
CU/FOSHuFgM9iuPFOK//mw==
2402.0-2480.0
2019-08-13
APPROVED
g1IxvdicPRNaYFHKsuhEvA==
2402.0-2480.0
2019-08-13
APPROVED
g1IxvdicPRNaYFHKsuhEvA==
2412.0-2462.0
2019-08-13
APPROVED
N7YkCl4+5S8pRPGOBo0bJQ==
5180.0-5240.0
2019-08-13
APPROVED
N7YkCl4+5S8pRPGOBo0bJQ==
5260.0-5320.0
2019-08-13
APPROVED
N7YkCl4+5S8pRPGOBo0bJQ==
5500.0-5720.0
2019-08-13
APPROVED
N7YkCl4+5S8pRPGOBo0bJQ==
5745.0-5825.0
2019-08-13
APPROVED
File NameDocument TypeDateDirect
External PhotoExternal Photos 2019-08-13 00:00:00 pdf
Label and location infoID Label/Location Info 2019-08-13 00:00:00 pdf
Letter of AgencyCover Letter(s) 2019-08-13 00:00:00 pdf
Authorization by original GranteeCover Letter(s) 2019-08-13 00:00:00 pdf
Authorization by original GranteeCover Letter(s) 2019-08-13 00:00:00 pdf

Application Details:

EquipmentDigital Modulation System
FRN0003583150
Grantee CodeGU6
Product Code-60SIPT
Applicant BusinessAvery Dennison Retail Information Services, LLC
Business Address170 Monarch Lane , Miamisburg,Ohio United States 45342
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMichael Ouziel – Regulatory Engineer
Applicant Phone
Applicant Fax937-865-2048
Applicant Email[email protected]
Applicant MailStop
Test FirmIntertek Testing Services NA
Test Firm ContactJames Sudduth
Test Firm Phone
Test Firm Fax859 226 1040
Test Firm Email[email protected]
Certified ByMichael K Quziel – Regulatory Engineer
Comment [CU/FOSHuFgM9iuPFOK//mw==]: Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Comment [g1IxvdicPRNaYFHKsuhEvA==]: Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.
Comment [N7YkCl4+5S8pRPGOBo0bJQ==]: Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. DFS operation is slave without radar detection. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz, and 5775 MHz.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC