B94-RTL8822CED

FCC ID

Equipment: 802.11a/b/g/n/ac RTL8822CE Combo Module

HP Inc. -RTL8822CED

3390 East Harmony Road, Fort Collins, CO 80528 United States

Application
Frequency Range
Final Action Date
Granted
pKr+bXxJIzh9QoMLgTODeA==
5180.0-5240.0
2020-01-10
APPROVED
pKr+bXxJIzh9QoMLgTODeA==
5260.0-5320.0
2020-01-10
APPROVED
pKr+bXxJIzh9QoMLgTODeA==
5500.0-5720.0
2020-01-10
APPROVED
pKr+bXxJIzh9QoMLgTODeA==
5745.0-5825.0
2020-01-10
APPROVED
oShVFcUHjvoT0rTOVFCFEw==
2402.0-2480.0
2020-01-10
APPROVED
oShVFcUHjvoT0rTOVFCFEw==
2412.0-2472.0
2020-01-10
APPROVED
uReFvxIdeorn5eBEXmDGKw==
2402.0-2480.0
2020-01-10
APPROVED
File NameDocument TypeDateDirect
ConfidentialityCover Letter(s) 2020-01-10 00:00:00 pdf
Original grantee_FCC Auth Ltr for Change of IDCover Letter(s) 2020-01-10 00:00:00 pdf
FCCdelegation - RPT to Frances Liang - June 2016Cover Letter(s) 2020-01-10 00:00:00 pdf
Change of ID Rrquested letterCover Letter(s) 2020-01-10 00:00:00 pdf
agent auth letterCover Letter(s) 2020-01-10 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2020-01-10 00:00:00 pdf
Change in ID Requested letterCover Letter(s) 2020-01-10 00:00:00 pdf
Change in ID requested letterCover Letter(s) 2020-01-10 00:00:00 pdf
External PhotosExternal Photos 2020-07-08 00:00:00 N/A

Application Details:

Equipment802.11a/b/g/n/ac RTL8822CE Combo Module
FRN0025126541
Grantee CodeB94
Product Code-RTL8822CED
Applicant BusinessHP Inc.
Business Address3390 East Harmony Road , Fort Collins,Colorado United States 80528
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantRichard P Tarsio – US Canada Technical Regulations
Applicant Phone
Applicant Fax000-000-0000
Applicant Email[email protected]
Applicant MailStopMS 66
Test FirmSGS Taiwan Ltd.
Test Firm ContactRyan Wang
Test Firm Phone 1708
Test Firm Fax+886-2-2298-2248
Test Firm Email[email protected]
Certified ByJim Chang – Manager
Comment [oShVFcUHjvoT0rTOVFCFEw==]: Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
Comment [pKr+bXxJIzh9QoMLgTODeA==]: Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Comment [uReFvxIdeorn5eBEXmDGKw==]: Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC