2AQPLLBEE5HY1MW

FCC ID

Equipment: Communication Module

Xaptum, Inc. LBEE5HY1MW

350 W Ontario 4th Floor, Chicago, IL 60654 United States

Application
Frequency Range
Final Action Date
Granted
mDVXIOTErfX3DuXei4B6Fw==
2402.0-2480.0
2019-02-11
APPROVED
Vhmky3mH06JsSND2F8kmww==
2402.0-2480.0
2019-02-11
APPROVED
Vhmky3mH06JsSND2F8kmww==
2412.0-2462.0
2019-02-11
APPROVED
7OZWSjwA4aII2dOqoaP25Q==
5180.0-5240.0
2019-02-11
APPROVED
7OZWSjwA4aII2dOqoaP25Q==
5260.0-5320.0
2019-02-11
APPROVED
7OZWSjwA4aII2dOqoaP25Q==
5500.0-5720.0
2019-02-11
APPROVED
7OZWSjwA4aII2dOqoaP25Q==
5745.0-5825.0
2019-02-11
APPROVED
File NameDocument TypeDateDirect
label justification letterID Label/Location Info 2019-02-11 00:00:00 pdf
LabelID Label/Location Info 2019-02-11 00:00:00 pdf
PoA MurataCover Letter(s) 2019-02-11 00:00:00 pdf
Change in ID RequestCover Letter(s) 2019-02-11 00:00:00 pdf
Change in ID PoACover Letter(s) 2019-02-11 00:00:00 pdf
Ext photosExternal Photos 2019-02-11 00:00:00 pdf

Application Details:

EquipmentCommunication Module
FRN0027710342
Grantee Code2AQPL
Product CodeLBEE5HY1MW
Applicant BusinessXaptum, Inc.
Business Address350 W Ontario 4th Floor, Chicago,Illinois United States 60654
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantDavid R Bild – VP, Product Delivery
Applicant Phone
Applicant Fax505-818-7889
Applicant Email[email protected]
Applicant MailStop
Test FirmMRT Technology (Suzhou) Co., Ltd.
Test Firm ContactMr. Marlin Chen
Test Firm Phone 880
Test Firm Fax
Test Firm Email[email protected]
Certified ByDavid R Bild –
Comment [7OZWSjwA4aII2dOqoaP25Q==]: Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes.
Comment [mDVXIOTErfX3DuXei4B6Fw==]: Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters.
Comment [Vhmky3mH06JsSND2F8kmww==]: Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC