User manual-part 1

FCC ID: ZY4CM0910

Users Manual

Download: PDF
FCCID_4178811

MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR MANUAL CM-09/10 AC electric tubular motors with remote operation

MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR WARNING CM-10-QC120;CM-09-QC120; CM-60-QC120;CM-09-C120;CM-10-C120 AC electric tubular motors with remote operation Read the instructions carefully before assembling and using the product. Assembly can be completed by non- professionals. For indoor use Motor features only. oung children can strangle Y  Cords may ensnare a child’s AC Motor 120V/230V Heavy duty Silent Bi-directional Alternating current Powered by For heavy Low noise m ­ otor Two-way themselves with the loop neck. motor 120V/230V mains application communication for of pull cords, chains and Move beds, cots and furniture electricity real-time response tapes, and cords that operate away from window covering Control options window coverings. cords. English To avoid strangulation and  Do not tie cords together. entanglement, keep cords out Make sure cords do not twist Remote Control App Control Connectivity of reach of young children. together and form a loop. Operate with a Operate with the Compatible with remote control MOTION app home and building Cleaning Warranty Service automation Follow these general rules when cleaning the outside First follow the advice in this manual. If the product of the device and its components: appears to be damaged or does not function properly, Use a damp, soft, lint-free cloth. Avoid getting go to your local dealer for instructions on how to obtain Support moisture in openings. warranty service. Do not use aerosol sprays, solvents, alcohol, or abrasives. Recycle This marking indicates that this product Service & Support should not be disposed with other household Do not perform repairs yourself. Do not attempt to wastes throughout the EU. To prevent possible harm open the device or disassemble it. You run the risk of Video App Store Google Play to the environment or human health from uncontrolled electric shock and voiding the limited warranty. No How to install, Download the Download the waste disposal, recycle it responsibly to promote the user-serviceable parts are inside. program and operate MOTION app MOTION app sustainable reuse of material resources. To return rtube.nl/red987 rtube.nl/red981 rtube.nl/red982 your used device, please use the return and collec-tion systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR Important Safety instructions Important Installation instructions FCC Manual | FCC ID: ZY4CM0910  eorient or relocate the receiving antenna R WARNING: To reduce the risk of severe injury or WARNING: Important safety instructions. Follow all Increase the distance separating the equipment death, it is important to follow these instructions for instructions, since incorrect installation can lead to and receiver personal safety. Save these instructions. severe injury. Regulatory Information Connect the equipment to an outlet on a circuit different from that to which the receiver is  ead and follow all installation instructions. R T his motor can only be used with soft material for 1 FCC Information for User connected This appliance can be used by children aged driven parts. This product does not contain any user Consult the dealer or an experienced radio/TV 8 years and above and persons with reduced Hazardous unprotected moving parts of the drive serviceable components and is to be used with technician for help physical, sensory or mental capabilities or lack must be installed higher than 2.5m above the approved antennas only. Any product changes or of experience and knowledge if they have been floor or any other level surface that could provide modifications will invalidate all applicable regulatory EU Declaration given supervision or instruction concerning use of access to it. certifications and approvals. Hereby, Coulisse declares that the radio the appliance in a safe way and understand the Install the actuating member of a manual release equipment type CM-09C/CM-09QC/CM-10QC is hazards involved. Children should not play with at a height less than 1.8m. 2 FCC Electronic Emission Notices in compliance whith directive 2014/53/EU. the appliance. Cleaning and user maintenance The actuating member of a biased switch is to be This device complies with part 15 of the FCC Rules. The full text of the EU declaration of conformity should not be performed by children without located within direct sight of the driven part but Operation is subject to the following two conditions: is available at the following internet address: supervision. away from moving parts. It is to be installed at a 1. This device may not cause harmful interference www.my.coulisse.com Do not allow children to play with fixed controls. minimum height of 1.5m and not accessible to 2. This device must accept any interference received, Keep remote controls away from children. the public. including interference that may cause undesired Frequently examine the installation for imbalance The mass and the dimension of the driven part operation. and signs of wear or damage to cables and must be compatible with the rated torque and springs. Do not use if repair or adjustment is rated operating time. 3 FCC Radio Frequency Interference English necessary. Fixed controls have to be clearly visible after statement This instruction manual is also available on the installation. This equipment has been tested and found to website. The driven part must be compatible with the comply with the limits for a class B digital device, The drive must be disconnected from its power rated torque (CM-09C 6N.m) (CM-09QC 4N.m) pursuant to Part 15 of the FCC Rules. These limits source during cleaning, maintenance and when (CM-10QC 8N.m) and rated operating time are designed to provide reasonable protection replacing parts. (4 min). against harmful interference when the equipment is The A-weighted emission sound pressure level of  inimum tube diameter: Ø35mm. M operated in a commercial environment. This the drive is equal to or less than 70dB(A). The drive is intended to be installed at a height equipment generates, uses and can radiate radio Indoor and household use only. of at least 2.5m above the floor or any other frequency energy and, if not installed and used in Disconnect the drive from the power supply accessible level surface. accordance with the instructions, may cause harmful or switch off the automatic controls when All-pole disconnection switches must be interference to radio communications. maintenance, such as window cleaning, is being incorporated in the fixed wiring in accordance with Operation of this equipment in a residential area carried out in the vicinity. the wiring rules. may cause harmful interference, in which case the When operating a biased switch, make sure that The appliance must only be supplied at safety user will be required to correct the interference at other persons are kept away. extra low voltage corresponding to the marking on their own expense. If this equipment does cause Do not operate when maintenance, such as the appliance. harmful interference to radio or television reception, window cleaning, is being carried out in the Before installing the drive, remove any which can be determined by turning the equipment vicinity. unnecessary cords or components and disable off and on, the user is encouraged to try to correct The tube motor must only be supplied with safety any equipment not needed for powered operation. the interference by one or more of the following extra low voltage corresponding to the marking on measures: the appliance. This appliance contains batteries that are non- replaceable.

MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR Frequency Motor Application Description Motor Tube ­ Torque Speed Battery Power Input High Extra Working Certificates emission ­diameter compatibility Capacity supply torque silent ­temperature power Tubular 42-50- CM-09-C 35 mm 6 Nm 28 rpm -10°C~40°C ≤2.32dBm Motor 65-80 mm Tubular 42-50- CM-09-QC 35 mm 4 Nm 28 rpm -10°C~40°C ≤2.32dBm Motor 65-80 mm Tubular 42-50- CM-10-QC 35 mm 8 Nm 15 rpm -10°C~40°C ≤2.32dBm Motor 65-80 mm Channels Wall Program Single Channel Max. Max. Frequency Range Power supply Length Width Height Certificates Mount blinds select select blinds scenes CM-11 30 m with Hand remote 1 ■ ■ - - Unlimited n/a 433.925 MHz 1 concrete wall CR2430 3.0V 120 mm 45 mm 14 mm CM-12 30 m with Hand remote 5 ■ ■ ■■ ■ Unlimited n/a 433.925 MHz 1 concrete wall CR2430 3.0V 120 mm 45 mm 14 mm English CM-13 30 m with Hand remote 15 ■■ ■ ■ ■ Unlimited n/a 433.925 MHz 1 concrete wall CR2430 3.0V 120 mm 45 mm 14 mm CM-15 30 m with Wall remote 1 ■ ■ - - Unlimited n/a 433.925 MHz 1 concrete wall CR2430 3.0V 66 mm 32.5 mm 13.8 mm CM-16 30 m with Wall remote 4 ■ - - - Unlimited n/a 433.925 MHz 1 concrete wall 3 x CR2430 3.0V 86 mm 86 mm 17 mm CM-17 30 m with Table remote 4 - ■ - - Unlimited n/a 433.925 MHz 1 concrete wall 2 x CR2450 3.0V 70.3 mm 62.7 mm 52.3 mm CM-18 20 m open 1 - - - - Unlimited n/a 433.925 MHz 2 x LR44 1.5V 19.5 mm ø 69.9 mm Pull remote space CM-20 433.925 MHz 30 m with Motion Wifi bridge n/a ■ ■ - - 30 20 2.4 GHz 1 concrete wall Micro USB - 5V DC 100 mm ø 25 mm

MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR CM-11 CM-12 CM-13 CM-17 1 Channel Remote 5 Channel Remote 15 Channel Remote 4 Channel Table Remote 1 3 2 4 Channel Channel Channel indicator indicator indicator Up Up Up Centre Centre Centre Up (stop/favourite) Channel 1 (stop/favourite) (stop/favourite) Channel 3 English Left Right Left Right 1 3 Centre (stop/favourite) Down Down Down Channel 2 Channel 4 2 4 Channel Previous Next Selection Down Channel Channel Pair Pair Pair Pair Button Button Button Button

MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR CM-15 CM-16 CM-18 CM-20 1 Channel Wall Remote 4 Channel Wall Remote 1 Channel Tassel Remote Motion Bridge Up Down Up Centre (stop/ Centre favourite) (stop/favourite) Left Right English Down Pair Button Pair Button Pair Button See manual CM-20

MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR MOTION CM-09/10 ELECTRONIC TUBULAR MOTOR 1 Connect power supply Mains Cable 230V 120V 3 Pair a remote Pair a remote control that is able to program blinds. See pages 6 and 7 IMPORTANT: Neutral Blue White for remote controls details. In this manual CM-12 is displayed. When the mains cable is permanently connected, a readily accessible disconnect Phase Brown Black device must be incorporated externally to the motor. Ground Yellow-green Green When there is a pluggable connecter installed on the mains cable, the socket-outlet must be installed near the motor and shall be easily accessible. Program Button Shortly press the program button on the 3.1 motor. The blind will start stepping, indicating that program mode has been activated. Channel (The blind remains stepping until the program indicator mode is de-activated.) 2 Find the program button on your blind 3.2 Select a desired channel for the blind using the channel selection button on the remote control. 3.3 Press the pair button on the back of the remote control to pair the blind to the selected channel. Channel Selection Pair Roller blind The blind will shortly stop stepping indicating English Button that the remote has been paired to the blind. Repeat steps 3.1 - 3.3 to remove a blind from a channel. End limits must be programmed to use a blind properly and to prevent it from being damaged. Proceed to step 9 if end limits are already set. 4 Check direction of rotation WARNING: risk of damage. Venetian blind Stop the blind before reaching the end positions. Up Shortly press the down button to check if the 4.1 blind unrolls the right way. If the blind moves up the direction of rotation must be changed. Down Simultaneously press the up and down button 4.2 to change the direction of rotation. Roman blind


Document Created: 2019-02-25 17:55:44
Document Modified: 2019-02-25 17:55:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC