User Manual

FCC ID: ZY4ABC26

Users Manual

Download: PDF
FCCID_2810166

2. Programming 4. Remote Holder Manual Absolute Control 1. Programming a blind Remote control ABC-26 Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material. Set in Program mode: Exit Program mode: Press program button Press program button on the motor, on the blind, The blind starts The blind stops stepping. stepping. Pair/unpair by pressing the program button (use pen) Pairing a blind to ! the remote that is PICO-WBX-ADAPT Action confirmed: already paired with the blind, blind stops stepping will delete the pairing. for 3 seconds Claro wallplate Claro wallplate 2. Set the favorite position To program a blind, the blind must be in program mode. (Press program button on the motor, when blind is not stepping.) WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury. WARNING: Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding Action confirmed: the limited warranty. No user-serviceable parts are inside. blind stops stepping for 3 seconds Set the blind Save your position by 5. Tips & Troubleshooting in the desired position. pressing the center button for two seconds. Please check www.coulisse.nl for the latest tips and troubleshooting guide. indoor use only 3. Switch the blind’s direction of rotation 6. Safety & Cleaning To program a blind, the blind must be in program mode. 6.1 Safety (Press program button on the motor, when blind is not stepping.) Example: when you press up on the remote and your blind moves down, 1. General information you have to switch the rotation direction of the blind. WARNING: Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited The ABC-26 the wall switch to operate Coulisse automation blinds. warranty. No user-serviceable parts are inside. Switch UP & DOWN Switch LEFT & RIGHT - Do not let children play with the blind and/or remote control 1.1 Performances - Do not paint the device ABC-26 - Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, Battery CR2430 3.0V Action confirmed: and allow the device to dry completely before replacing the battery. Channels 1 blind stops stepping - Do not drop, knock, or shake the device. Rough handling can break internal circuit boards. for 3 seconds Max. blinds remote infinite Range (inside building) 20m, 2 concrete walls 6.2 Cleaning Frequency 2.4 GHz Follow these general rules when cleaning the outside of the device and its components: Weight 40 grams Hold the up and down Hold the left and right - Make sure the device is unplugged. button to switch the button to switch the - Use a damp, soft, lint-free cloth. Avoid getting moisture in openings. 1.2 Buttons direction of rotation direction of rotation. - Don’t use aerosol sprays, solvents, alcohol, or abrasives. Indicator 3. Operating 7. Service & Support Operate a blind Up WARNING: Do not make repairs yourself. Do not attempt to open the device Center button (stop - favorite) or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Left Right Program button Online Resources For the latest information and updated manuals go to www.coulisse.nl. Down Obtaining Warranty Service First follow the advice in this booklet and then go to your local dealer. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service. 1.3 Changing the battery Disclaimer: + Up / tilt Down / tilt Stop Left * Right * 2 sec: © Copyright Coulisse - Favorite position * vertical motor only CR2430 3V All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher.  +  Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or faults in this manual.  Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any person or entity of such revisions or changes.  The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.nl or contact your &OLFN Coulisse contact person . We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.nl. ABC-26_R0_GB0 Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands

FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ǂ Reorient or relocate the receiving antenna. ǂ Increase the separation between the equipment and receiver. ǂ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ǂ Consult the dealer or an experienced radio/TV technician for help.


Document Created: 2015-11-04 08:55:51
Document Modified: 2015-11-04 08:55:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC