Radio Test Setup Photos_MEB-R300_Rev2

FCC ID: ZNFMEBR300

Test Setup Photos

Download: PDF
FCCID_3138550

_SGS. Test setup photos of EUT

SGS — Photo of EUT Supply DC 5 V Test Jig Switch Slide to test Test Method — Every time when the switch moves from the center to the left, the mode rotates 9 kinds of operation. : Unmodulated Transmission Channel 2 —> 39 —> 80 —> Modulated Transmission Channel 2 —> 39 —> 80 —> Receive Mode Channel 2 —> 39 —> 80

1. Orthogonal planes of EUT — The testing was set in the two orthogonal planes and measured for each position (X, Y, Z). A. X—axis B. Y—axis

C. Z—axis

2. Worst case of orthogonal planes each frequency band — Test setup photos for each mode were reported as representative worst axis after radiated measurements for each position were complete. — To get a maximum emission level from the EUT, the EUT is manipulated through three orthogonal planes (X, Y). Worst orthogonal plan of EUT is X — axis during radiation test. — Photo of Radiated Spurious Emission Test (Below 1 M)

— Photo of Radiated Spurious Emission Test (Above 1 0)

— Photo of AC Power line emission Test

The EUT and Test Jig


Document Created: 2016-09-07 09:44:16
Document Modified: 2016-09-07 09:44:16
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC