User manual rev.1

FCC ID: ZKJ-KITCHENHUB1

Users Manual

Download: PDF
FCCID_4178307

KITCHEN HUB™ SAFETY INFORMATION. . . . . . . . . . . . . .3 OWNER’S MANUAL & USING THE KITCHEN HUB INSTALLATION Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 INSTRUCTIONS Control Features . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Wi-Fi Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 UVH1301 Chef Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CARE AND CLEANING Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 INSTALLATION INSTRUCTIONS ... 9 Mounting Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Installation Types . . . . . . . . . . . . . . . . . . . . . . . . . 17 A. Outside Top Exhaust . . . . . . . . . . . . . . . . . . 18 B. Recirculating . . . . . . . . . . . . . . . . . . . . . . . . 22 C. Outside Back Exhaust . . . . . . . . . . . . . . . . 25 TROUBLESHOOTING TIPS . . . . . . . . . 28 LIMITED WARRANTY . . . . . . . . . . . . . . 29 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . 30 CONSUMER SUPPORT . . . . . . . . . . . . . 32 Write the model and serial ESPAÑOL numbers here: Para consultar una version en español de este manual de Model # _________________ instrucciones, visite nuestro sitio de internet GEAppliances.com. Serial # _________________ You can find them on a label on the inside of the unit behind the filters. GE is a trademark of the General Electric Company. Manufactured under trademark license. 49-2000492 Rev. 0 01-19 GEA

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME. Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family. We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product, and we think you will too. Among other things, registration of your appliance ensures that we can deliver important product information and warranty details when you need them. Register your GE appliance now online. Helpful websites and phone numbers are available in the Consumer Support section of this Owner’s Manual. You may also mail in the pre-printed registration card included in the packing material. 2 49-2000492 Rev. 0

IMPORTANT SAFETY INFORMATION SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING WARNING TO REDUCE THE RISK OF FIRE, WARNING TO REDUCE THE RISK OF INJURY ELECTRIC SHOCK OR INJURY TO PERSONS, TO PERSONS IN THE EVENT OF A RANGE TOP OBSERVE THE FOLLOWING: GREASE FIRE, OBSERVE THE FOLLOWING*: A. Use this unit only in the manner intended by the A. SMOTHER FLAMES with a close-fitting lid, cookie manufacturer. If you have questions, contact the sheet or metal tray, then turn off the burner. BE manufacturer. CAREFUL TO PREVENT BURNS. If the flames B. To avoid the risk of scald injury from a hot cooktop, do not go out immediately, EVACUATE AND CALL keep young children away from the touchscreen. THE FIRE DEPARTMENT. C. Before servicing or cleaning unit, switch power off B. NEVER PICK UP A FLAMING PAN—You may be at service panel and lock the service disconnecting burned. means to prevent power from being switched C. DO NOT USE WATER, including wet dishcloths or on accidentally. When the service disconnecting towels—a violent steam explosion will result. means cannot be locked, securely fasten a D. Use an extinguisher ONLY if: prominent warning device, such as a tag, to the 1. You know you have a Class ABC extinguisher, service panel. and you already know how to operate it. D. Do not use this unit with any solid-state speed 2. The fire is small and contained in the area where control device. it started. E. This unit must be grounded. 3. The fire department is being called. CAUTION FOR GENERAL VENTILATING USE 4. You can fight the fire with your back to an exit. *Based on “Kitchen Fire Safety” published by NFPA. ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS. WARNING TO REDUCE THE RISK OF A CAUTION TO REDUCE RISK OF FIRE AND RANGE TOP GREASE FIRE: TO PROPERLY EXHAUST AIR, BE SURE TO DUCT A. Never leave surface units unattended. Boilovers AIR OUTSIDE. DO NOT VENT EXHAUST AIR INTO cause smoking and greasy spillovers that may SPACES WITHIN WALLS OR CEILINGS OR INTO ignite. Heat oils slowly on medium settings. ATTICS, CRAWL SPACES OR GARAGES. B. Always turn fan ON when cooking at high heat or when flambéing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé). C. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. D. Use proper pan size. Always use cookware appropriate for the size of the surface element. READ AND SAVE THESE INSTRUCTIONS 49-2000492 Rev. 0 3

IMPORTANT SAFETY INFORMATION SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING NOTE: This equipment has been tested and found which can be determined by turning the equipment to comply with the limits for a Class B digital device, off and on, the user is encouraged to try to correct the pursuant to part 15 of the FCC Rules. These limits interference by one or more of the following measures: are designed to provide reasonable protection against Ŷ Reorient or relocate the receiving antenna. harmful interference in a residential installation. This equipment generates, uses and can radiate radio Ŷ Increase the separation between the equipment and frequency energy and, if not installed and used in receiver. accordance with the instructions, may cause harmful Ŷ Connect the equipment into an outlet on a circuit interference to radio communications. However, there different from that to which the receiver is connected. is no guarantee that interference will not occur in a Ŷ Consult the dealer or an experienced radio/TV particular installation. If this equipment does cause technician for help. harmful interference to radio or television reception, This device contains licence-exempt transmitter(s)/ Les antennes installées doivent être situées de facon receiver(s) that comply with Innovation, Science and à ce que la population ne puisse y être exposée à une Economic Development Canada’s licence-exempt RSS(s). distance de moin de 20 cm. Installer les antennes de Operation is subject to the following two conditions: facon à ce que le personnel ne puisse approcher à 20 (1) This device may not cause interference. cm ou moins de la position centrale de l’ antenne. (2) This device must accept any interference, including La FCC des éltats-unis stipule que cet appareil doit être interference that may cause undesired operation of en tout temps éloigné d’au moins 20 cm des personnes the device. pendant son functionnement. L’émetteur/récepteur exempt de licence contenu dans Limited by local law regulations, version for North le présent appareil est conforme aux CNR d’Innovation, America does not have region selection option. Sciences et Développement économique Canada The device for operation in the band 5150-5250 MHz is applicables aux appareils radio exempts de licence. only for indoor use to reduce the potential for harmful L’exploitation est autorisée aux deux conditions suivantes : interference to co-channel mobile satellite systems. 1) L’appareil ne doit pas produire de brouillage; Les dispositifs fonctionnant dans la bande de 5 150 à 5 2) L’appareil doit accepter tout brouillage radioélectrique 250 MHz sont réservés uniquement pour une utilisation subi, même si le brouillage est susceptible d’en à l'intérieur afin de réduire les risques de brouillage compromettre le fonctionnement. préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be Changes or modifications not expressly approved by the maintained between the antenna of this device and party responsible for compliance could void the user's persons during device operation. authority to operate the equipment. To ensure compliance, operations at closer than this distance is not recommended. How to Remove Protective Shipping Film and Packaging Tape Carefully grasp a corner of the protective shipping film To assure no damage is done to the finish of the product, with your fingers and slowly peel it from the appliance the safest way to remove the adhesive from packaging surface. Do not use any sharp items to remove the film. tape on new appliances is an application of a household Remove all of the film before using the appliance for the liquid dishwashing detergent. Apply with a soft cloth and first time. allow to soak. NOTE: The adhesive must be removed from all parts. NOTE: For further cleaning instructions/suggestions, please refer to the Care And Cleaning section. 4 49-2000492 Rev. 0

Hardware USING THE KITCHEN HUB: Hardware / Contol Features Front Camera Screen LVYLOOH 25 F | LRX 8:50 Monday, Fe bruary 12 Speaker Volume Button Swipe up on the screen On/Off to access controls. Google Skype U+ Connect Music n ent Blue Apro Entertainm 6SRWLI\ Recipes HV« 3OD\0RYL Hulu 1HWÀL[ Cooktop Camera Lights Control Features 3 4 5 7 8 9 1 FAN LIGHT OFF LOW MED HIGH BOOST OFF DIM HIGH 2 6 1. Ventilation Fan and Light Control Screen 6. LIGHT: Light level control. Tap DIM for low light, MED 2. FAN: Speed control for fan. Tap LOW for LOW for medium light, and HIGH for bright light. speed. MED for MEDIUM speed and HIGH for 7. Lock: Select to lock screen controls. HIGH speed. Tap BOOST for BOOST speed. 8. Volume: Slide to increase or decrease media 3. Camera: Select to take a picture of your cooking volume. surface. 9. Brightness: Slide to increase or decrease screen 4. Microphone: Select to mute/unmute. brightness. 5. Notification: Select to turn notification sounds on For Android device setup, and for Android help, please and off. reference the Setup Wizard on the Kitchen Hub. 49-2000492 Rev. 0 5

USING THE KITCHEN HUB USING THE KITCHEN HUB: WiFi / Heat Sensor / Screen Moisture Protection Connecting your WiFi Connect Enabled Appliance Your GE Appliances Kitchen Hub is recommended to be Use the Setup Wizard to connect unit to WiFi. connected to WiFi. Heat Sensor This unit is equipped with a heat sensor that will If FAN is OFF and excessive temperature is detected, activate the ventilation FAN if excessive temperatures the FAN will automatically turn to LOW speed. You may are detected above the cooktop surface to protect the adjust FAN speed to MEDIUM, HIGH, or BOOST, but Kitchen Hub components from overheating. you will not be able to turn to OFF until temperatures return to an acceptable level. Screen Moisture Protection System Your Kitchen Hub is equipped with a screen protection The system is on while the screen is in the awake system. The system expels small amounts of air around state and off when the screen is in screensaver mode and below the screen to keep the touchscreen area or off position. Operating the cooktop while screen dry and clean by preventing condensation or other protection system is off may result in condensation substances during cooktop operation. on the touchscreen. It is recommended to activate screen during cooking to prevent this from happening. If condensation build up continues while protection system is active, turn the ventilation FAN on to provide additional protection. 6 49-2000492 Rev. 0

Filters USING THE KITCHEN HUB: Filters Be sure the circuit breaker is off and all surfaces are cool before cleaning or servicing any interior part of the unit. Metal Grease Filter The metal filters trap grease during cooking. The filters must ALWAYS be in place when the unit is in use. The grease filters are dishwasher-safe and should be cleaned every month, depending on the usage of the unit. To remove: Press on the filter handle to disengage the filter lock to release the filter. To replace: Fit the tabs at the bottom of the filter into the slots in the back of the filter opening. Lift up the front side of the filter and push gently until the filter locks into place. Make sure the filter lock is in the closed position to secure the filter. To clean: Swish the filter in hot soapy water and rinse in clean Metal Grease water or wash it in the dishwasher. Do not use abrasive Filter cleansers. NOTE: Some discoloration of the filter may occur in the dishwasher. Charcoal Filter (for recirculation installation only) If the model is not vented to the outside, the air needs to To remove: be recirculated through a disposable charcoal filter that 1. Remove the metal filters—see Metal grease filter helps remove smoke and odors. section. NOTE: DO NOT rinse, or put charcoal filter in an 2. Remove the charcoal filter on each side of the blower. automatic dishwasher. The charcoal filters are included with the unit. They cannot be cleaned. It is recommended that the charcoal filter be replaced every 6 months or if it is noticeably dirty or discolored. Charcoal Order Charcoal Filter UXCF91 Filter Mount To inquire about purchasing replacement charcoal filters or to find the location of a dealer nearest you, please call our toll-free number: National Parts Center 800.626.2002 To install: 1. Remove the metal filters—see Metal Grease Filter section. 2. Install the charcoal filter mounts to either side of the motor. 3. Insert the snap on the charcoal filter into the center on the mount. 4. Clip the charcoal filter in until it is locked. 5. Repeat with second filter on the other side of the motor. 6. Replace the metal filters - See Metal Grease Filter section. 49-2000492 Rev. 0 7

Surfaces CARE AND CLEANING: Surfaces Stainless Steel Surfaces (on some models) Do not use a steel wool pad; it will scratch the Use only a liquid cleanser free of grit and rub in the surface. direction of the brush lines with a damp soft sponge. To clean the stainless steel surface, use warm sudsy To inquire about purchasing stainless steel appliance water or a stainless steel cleaner or polish. Always wipe cleaner or polish, or to find the location of a dealer the surface in the direction of the brush line. Follow nearest you, please call our toll-free number: the cleaner instructions for cleaning the stainless steel National Parts Center surface. Cleaners with oxalic acid such as Bar Keepers 800.626.2002 Friend Soft Cleanser™ will remove surface rust, tarnish, and GEApplianceParts.com small blemishes. To receive a coupon for a trial sample of Bar Keepers Friend Soft Cleanser™ follow the link below or scan the QR Code. barkeepersfriend.com/ge Painted Surfaces and Black Stainless Color (on some models) Do not use a steel wool pads or other abrasive NOTE: When cleaning, take care not to come in contact cleaners; they will scratch the surface. with filters and other surfaces. Clean grease-laden surfaces frequently. To clean the outer surface, use a hot, damp cloth with a mild detergent suitable for painted surfaces. Use a clean, hot, damp cloth to remove soap. Dry with a dry, clean cloth. How to Clean the Outside We recommend against using cleaners with Screen ammonia or alcohol, as they can damage the Wipe with a damp cloth or glass cleaner such as appearance of the appliance. If you choose to use Windex. Dry thoroughly. Do not use large amounts of a common household cleaner, first apply the cleaner soap and water, sharp objects or abrasives - they can directly to a clean cloth, then wipe the soiled area. damage it. Case Bottom Clean the outside of the appliance with a sudsy cloth. Clean off the grease and dust on the bottom often. Use a Rinse and then dry. Do not use appliance wax, polish, solution of warm water and detergent. bleach or products containing chlorine on Stainless Steel Cooktop Camera finishes. Use a dry, soft cloth to clean the cooktop camera. 8 49-2000492 Rev. 0

INSTALLATION INSTRUCTIONS Installation Kitchen Hub Instructions UVH1301 “If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737) or visit our website at: GEAppliances.com” BEFORE YOU BEGIN WARNING TO REDUCE THE RISK OF FIRE, Read these instructions completely and carefully. ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Ŷ IMPORTANT — Save these A. Installation work and electrical wiring must be instructions for local inspector’s use. done by qualified person(s) in accordance with Ŷ IMPORTANT — Observe all governing all applicable codes and standards, including fire-rated construction. codes and ordinances. Ŷ Note to Installer – Be sure to leave these B. Sufficient air is needed for proper combustion and exhausting of gases through the flue instructions with the Consumer. (chimney) of fuel burning equipment to prevent Ŷ Note to Consumer – Keep these instructions for back drafting. Follow the heating equipment future reference. manufacturer’s guidelines and safety standards Ŷ Skill level – Installation of this appliance requires such as those published by the National Fire basic mechanical and electrical skills. Protection Association (NFPA), the American Ŷ Completion time – Approximately 1 to 3 hours Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local Ŷ Proper installation is the responsibility of the code authorities. installer. C. When cutting or drilling into wall or ceiling, do Ŷ Product failure due to improper installation is not not damage electrical wiring and other hidden covered under the Warranty. utilities. D. Ducted fans must always be vented to the outdoors. E. When applicable, install any makeup (replacement) air system in accordance with local building code requirements. Visit GEAppliances. com for available makeup air solutions. WARNING TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCT WORK. 49-2000492 Rev. 0 9

Installation Instructions INSTALLATION INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS CAUTION For personal safety, the This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of mounting surface must be capable of supporting electric shock by providing an escape wire for the the cabinet load of this 75 pound product. electric current. This appliance is equipped with a cord CAUTION For personal safety, this product having a grounding wire with a grounding plug. The cannot be installed in cabinet arrangements plug must be plugged into an outlet that is properly such as an island or a peninsula. It must be installed and grounded. mounted to BOTH a top cabinet AND a back wall. WARNING Improper grounding can result in a risk of electric shock. CAUTION To avoid the risk of personal Consult a qualified electrician if the grounding injury (back injury or other injuries due to instructions are not completely understood, or if excessive weight of the product) or property doubt exists as to whether the appliance is properly damage, you will need two people to install this grounded. product. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance. ELECTRICAL REQUIREMENTS 120 V Models Where a standard two-prong wall receptacle This product requires a three-prong grounded is encountered, it must be replaced with outlet. Product rating is 120 volts AC, 60 Hertz. a properly grounded three-prong wall This product must be connected to a supply circuit receptacle, installed by a qualified electrician. of the proper voltage and frequency. Wire size must conform to the requirements of the National WARNING Risk of Electric Shock. Electrical Code or the prevailing local code. The Can cause injury or death: DO NOT, under any outlet box should be located in the cabinet above circumstances, cut, deform or remove any of the the unit and away from any potential ducting. The prongs from the power cord. Failure to comply outlet box and supply circuit should be installed by may cause fire. a qualified electrician and conform to the National Electrical Code or the prevailing local code. 10 49-2000492 Rev. 0

Installation Instructions INSTALLATION INSTRUCTIONS MOUNTING SPACE Bottom edge of NOTES: cabinet needs WREHƎRU ‡7KHVSDFHEHWZHHQWKHFDELQHWVPXVWEHƎZLGH Ǝ more from max. and free of obstructions. the cooking surface or • If you are going to vent your unit to the outside, top surface of gas grates, see Installation Types 2A or 2C for cabinet and wall òƎ Ǝ Ǝ whichever is preparation. min. taller • When installing the unit beneath smooth, flat Ǝ cabinets, be careful to follow the instructions on the Backsplash ƎPLQIURP top cabinet template for power cord clearance. the floor to the bottom of • Maximum cabinet depth above and beside the unit the cabinet. is 13” max for standard installation. 15" cabinet 69" is the recommended depth requires additional steps using an additional distance. installation kit JKX15BUMPWW/BB. • For models setup in Recirc Exhaust: Do not allow cabinetry or other objects to block the airflow of the vent. • The product should not be installed over any cooktop or range with a combined cooktop BTU greater than 72,000 BTU. 49-2000492 Rev. 0 11

Installation Instructions INSTALLATION INSTRUCTIONS TOOLS AND MATERIALS REQUIRED PARTS NEEDED FOR INSTALLATION (NOT SUPPLIED) Ŷ 1 Wall or Roof Cap (for ducted venting only) Ŷ All Metal Ductwork (for ducted venting only) Safety glasses DAMAGE – SHIPMENT/INSTALLATION Pencil and tape measure • If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or Phillips screwdriver replacement. • If the unit is damaged by the customer, repair or Level replacement is the responsibility of the customer. • If the unit is damaged by the installer (if other than the customer), repair or replacement must Aluminized be made by arrangement between customer and Rectangular duct and duct tape installer. adaptors as needed per installation (length will vary) PARTS INCLUDED Gloves HARDWARE PACKET PART QUANTITY Wood Screws 2 (3/16” x 2”) Tin snips Scissors (to cut Toggle Bolts (and 4 template, if necessary) wing nuts) (1/4” x 3”) Self-aligning 3 Machine Screw (1/4”-28 x 3-1/4”) Electric drill with #2 Phillips bit Filler blocks or scrap wood pieces, if needed Nylon Grommet (for 1 for top cabinet spacing metal cabinets) (used on recessed bottom cabinet installations only) Power Cord Strap 1 (plastic) Saw (saber, hole or keyhole) You will find the installation hardware contained in a packet with the unit. Check to make sure you have all these parts. NOTE: Some extra parts are included. Drill bits: 2", 3/16", 5/8" 12 49-2000492 Rev. 0

Installation Instructions INSTALLATION INSTRUCTIONS PARTS INCLUDED ADVANCE PLANNING ADDITIONAL PARTS Duct Install Planning (for outside exhaust only) PART QUANTITY Ŷ8VHPHWDOGXFWZRUNRQO\ Top Cabinet 1 Ŷ'HWHUPLQHWKHH[DFWORFDWLRQRIWKHDSSOLDQFH Template Ŷ3ODQWKHURXWHIRUYHQWLQJH[KDXVWWRWKHRXWGRRUV To maximize the ventilation performance of the vent system: ≤ ≤ ≤ Rear Wall 1 1.Minimize the duct run length and number of Template transitions and elbows. 2.Maintain a constant duct size. Owner's 1 Manual 3.Seal all joints with duct tape to prevent any leaks. NOTE: Flexible vent is not recommended. Flexible Exhaust 1 vent creates back pressure and air turbulence that Adaptor greatly reduces performance. Ŷ0D[LPXPHTXLYDOHQWGXFWOHQJWKIRU&)0 150 foot. Charcoal 2 Filter Ŷ,QVWDOODZDOOFDSRUURRIFDSZLWKGDPSHUDWWKH exterior opening. Purchase the wall or roof cap and any transition and length of duct needed in advance. Ŷ:KHQDSSOLFDEOHLQVWDOODQ\PDNHXS (replacement) air system in accordance with local building code requirements. Use makeup air kit JXMUA8. Vent system can terminate either through the roof or the wall. Roof Cap Round Duct Add Insulation and/or Caulk Wall Cap Add tape to joint Add Insulation Kitchen Hub and/or Caulk Recirculation Install Planning Charcoal filters (included) are necessary for recirculation installation. 49-2000492 Rev. 0 13

Installation Instructions INSTALLATION INSTRUCTIONS 1. PLACEMENT OF THE MOUNTING PLATE A REMOVING THE KITCHEN HUB B FINDING THE WALL STUDS FROM THE CARTON/REMOVING THE MOUNTING PLATE Remove the packaging CAUTION Wear gloves to protect against sharp edges. Wall Studs 1. Open the box and fold back all four carton flaps fully against the carton sides. Remove the following items from the protective foam: charcoal Center filters, cord plug, damper, and screws. Do not remove the foam protecting the front of the unit. 2. Carefully roll the unit and carton over onto the top side. The unit should be resting in the foam. 3. Pull the carton up to remove. 1. Find the studs, using one of the following methods: A. Stud finder OR Carton B. Use a hammer to tap lightly across the mounting surface to find a solid sound. This will indicate a stud location. 2. After locating the stud(s), find the center by probing the wall with a small nail to find the edges of the stud. Then place a mark halfway between the edges. The center of any adjacent studs should be Foam ƎRUƎIURPWKLVPDUN 3. Draw a line down the center of the stud. IMPORTANT: The unit must be installed to at least 4. The mounting plate is attached to the back of one wall stud. the unit. Remove the two screws holding it to the back. The plate will be used as the rear wall template and for mounting the unit to the wall. Screws Mounting Plate 5. Set the unit upright. Remove and properly discard plastic bags and foam. 14 49-2000492 Rev. 0

Installation Instructions INSTALLATION INSTRUCTIONS 1. PLACEMENT OF THE MOUNTING PLATE (Cont.) C DETERMINING MOUNTING PLATE LOCATION UNDER YOUR CABINET Plate Position – flat bottom cabinet Plate Position – recessed cabinet bottom Mounting Plate Tabs Touching the Mounting Plate Back Frame of the Tabs Touching Cabinet the Cabinet Bottom ƎWR&RRNWRS At least 30" Plate Position – cabinet with front overhang Your cabinets may have decorative trim that interferes with the unit installation. You may need to remove the decorative trim to install the unit properly and to make it level. Mounting Plate THE KITCHEN HUB MUST BE LEVEL. with Tabs Below Cabinet Bottom the Use a level to make sure the cabinet bottom is Same Distance as level. the Front Overhang Depth If the cabinets have a front overhang, install the mounting plate down the same distance as the front overhang depth. This will keep the unit level. 1. Measure the inside depth of the front overhang. 2. Draw a horizontal line on the back wall an equal distance below the cabinet bottom as the inside depth of the front overhang. 3. For this type of installation with front overhang, align the mounting tabs with this horizontal line, not touching the cabinet bottom as described in Step D. ƎWR&RRNWRS 49-2000492 Rev. 0 15

Installation Instructions INSTALLATION INSTRUCTIONS 1. PLACEMENT OF THE MOUNTING PLATE (Cont.) D ALIGNING THE MOUNTING PLATE 30” Hole B Hole A Draw a Vertical Line on Wall from Center of Top Cabinet Hole C Hole D Area E Notch CAUTION Wear gloves to protect against NOTE: Holes C and D are inside area E. If neither C nor D is in a stud, find a stud somewhere in area sharp edges. E and draw a fifth circle to line up with the stud. It is 1. Draw a vertical line on the wall at the center of the important to use at least one wood screw mounted ƎZLGHVSDFH firmly in a stud to support the weight of the unit. 2. Use the mounting plate as the template for the rear Set the mounting plate aside. wall. Place the mounting plate on the wall, making sure that the tabs are touching the bottom of the WARNING Risk of electric shock. Can cause cabinet or the level line drawn in Step C for cabinets with front overhang. Line up the notch and center line injury or death. Take care to not drill into electrical on the mounting plate to the center line on the wall. wiring inside walls or cabinets. 3. While holding the mounting plate with one hand, 4. Drill holes on the circles. If there is a stud, drill a draw circles on the wall at holes A, B, C, and D (see »ƎKROHIRUZRRGVFUHZV)RUKROHVWKDWGRQ¶WOLQH illustration above/actual plate marked with arrows). XSZLWKDVWXGGULOOD»ƎKROHIRUWRJJOHEROWV Four holes must be used for mounting. NOTE: DO NOT MOUNT THE PLATE AT THIS TIME. 16 49-2000492 Rev. 0

Installation Instructions INSTALLATION INSTRUCTIONS 2. INSTALLATION TYPES (Choose A, B or C) This appliance is designed for adaptation to the NOTE: Select the type of ventilation required for following 3 types of ventilation: your installation and proceed to that section. This A. Outside Top Exhaust (Vertical Duct) unit is shipped assembled for outside top exhaust. B. Recirculating (Non-Vented Ductless) C. Outside Back Exhaust (Horizontal Duct) A OUTSIDE TOP EXHAUST B RECIRCULATING (VERTICAL DUCT) (NON-VENTED DUCTLESS) See page 18. See page 21. C OUTSIDE BACK EXHAUST (HORIZONTAL DUCT) See page 25. 49-2000492 Rev. 0 17

Installation Instructions INSTALLATION INSTRUCTIONS A. OUTSIDE TOP EXHAUST (Vertical Duct) INSTALLATION OVERVIEW A1. Attach Mounting Plate to Wall A2. Prepare Top Cabinet A3. Adjust Blower Exhaust A4. Install Exhaust Adaptor A5. Mount the Kitchen Hub A6. Connect Ductwork A7. Finalize Installation A1 ATTACH THE MOUNTING PLATE A1 ATTACH THE MOUNTING PLATE TO THE WALL TO THE WALL (Cont.) B A CAUTION Be careful to avoid pinching fingers between the back of the mounting plate and the wall. 4. Tighten all bolts. Pull the plate away from the wall to help tighten the bolts. C D A2 USE TOP CABINET TEMPLATE Attach the plate to the wall using toggle bolts. At FOR PREPARATION OF TOP least one wood screw must be used to attach the plate to a wall stud. Recommended locations on the CABINET mounting plate are indicated by A, B, C and D. You need to drill holes for the top support screws 1. Remove the toggle wings from the bolts. and a hole large enough for the power cord to fit 2. Insert the bolts into the mounting plate through through, and a cutout large enough for the exhaust the holes designated to go into drywall and adaptor. UHDWWDFKWKHWRJJOHZLQJVWR»ƎRQWRHDFKEROW To use toggle bolts: Spacing for Toggles More Than Wall Thickness Mounting Toggle Wings Plate Toggle Bolt Wall Mounting Plate Bolt End 3. Place the mounting plate against the wall and • Read the instructions on the TOP CABINET insert the toggle wings into the holes in the wall to TEMPLATE. mount the plate. • Tape it underneath the top cabinet. NOTE: Before tightening toggle bolts and wood • Drill the holes, following the instructions on the screw, make sure the tabs on the mounting plate TOP CABINET TEMPLATE. touch the bottom of the cabinet when pushed flush against the wall and that the plate is properly CAUTION Wear safety goggles when centered under the cabinet. drilling holes in the cabinet bottom. 18 49-2000492 Rev. 0

Installation Instructions INSTALLATION INSTRUCTIONS A. OUTSIDE TOP EXHAUST (Vertical Duct) (Cont.) A3 ADJUST BLOWER EXHAUST A4 ASSEMBLE AND INSTALL The unit is shipped in the top exhaust configuration. ADAPTOR If configuration is not in the top exhaust direction, Screws follow the steps below. CAUTION Wear gloves to protect against Damper sharp edges. 1. Remove damper mounting plate and diverter. 2. Remove diverter from angled position and reinsert vertically as shown. 3. Reattach the damper mounting plate with opening on top of unit as shown. 1. Remove 3 screws shown above. Position the damper on top of the damper mounting plate and secure with removed screws. 2. Remove the tape from the damper. Make sure that the damper pivots easily before mounting the unit. You will need to make adjustments to assure proper alignment with your house exhaust duct after the unit is installed. 49-2000492 Rev. 0 19

Installation Instructions INSTALLATION INSTRUCTIONS A. OUTSIDE TOP EXHAUST (Vertical Duct) (Cont.) A5 MOUNT THE KITCHEN HUB A5 MOUNT THE KITCHEN HUB (Cont.) 3. Insert 2 self-aligning screws(1/4" - 28 x 3-1/4") through top-center cabinet hole. Turn two full turns on each screw. Cabinet Front Cabinet Bottom Shelf Filler Block CAUTION To avoid the risk of personal This injury (back injury or other injuries due to Equivalent distance excessive weight of the unit) or property to Depth can NOT of Cabinet exceed 2” damage, you will need two people to install this Recess to ensure product. proper installation IMPORTANT: Do not put any pressure on front Self-Aligning Screw screen during installation. Unit Top WARNING Risk of Electric Shock. Can 4. Tighten the 2 screws to the top of the unit. (While cause injury or death: If installing unit with metal tightening screws, hold the unit in place against cabinets, cover the edge of the power supply the wall and the top cabinet.) cord hole with the nylon grommet in hardware bag. IMPORTANT: If filler blocks are not used, case damage may occur from overtightening screws. NOTE: When mounting the unit, thread power cord through hole in bottom of top cabinet. Keep it tight throughout Steps 1–3. Do not pinch cord or lift unit by pulling cord. 1. Lift unit, tilt it forward, and hook slots at back bottom edge onto four lower tabs of mounting plate. 2. Rotate front of unit up against cabinet bottom. 20 49-2000492 Rev. 0

Installation Instructions INSTALLATION INSTRUCTIONS A. OUTSIDE TOP EXHAUST (Vertical Duct) (Cont.) A6 CONNECTING DUCT WORK 1. Extend the house duct down to connect to the exhaust adaptor. 2. Seal exhaust duct joints using duct tape. A7 FINALIZE INSTALLATION Plug in the unit. 49-2000492 Rev. 0 21

Installation Instructions INSTALLATION INSTRUCTIONS B. RECIRCULATING (Non-Vented Ductless) INSTALLATION OVERVIEW B1. Attach Mounting Plate to Wall B2. Prepare Top Cabinet B3. Adjust Blower Exhaust B4. Mount the Kitchen Hub B5. Filters B6. Finalize Installation B1 ATTACH THE MOUNTING PLATE B1 ATTACH THE MOUNTING PLATE TO THE WALL TO THE WALL (Cont.) CAUTION Be careful to avoid pinching fingers between the back of the mounting plate and the wall. 4. Tighten all bolts. Pull the plate away from the wall to help tighten the bolts. Attach the plate to the wall using toggle bolts. At B2 USE TOP CABINET TEMPLATE least one wood screw must be used to attach the FOR PREPARATION OF TOP plate to a wall stud. CABINET 1. Remove the toggle wings from the bolts. You need to drill holes for the top support screws 2. Insert the bolts into the mounting plate through and a hole large enough for the power cord to fit the holes designated to go into drywall and through. UHDWWDFKWKHWRJJOHZLQJVWR»ƎRQWRHDFKEROW To use toggle bolts: Spacing for Toggles More Than Wall Thickness Toggle Wings Mounting Toggle • Read the instructions on the TOP CABINET Plate Bolt TEMPLATE. • Tape it underneath the top cabinet. • Drill the holes, following the instructions on the Wall TOP CABINET TEMPLATE. Bolt End CAUTION Wear safety goggles when 3. Place the mounting plate against the wall and insert the toggle wings into the holes in the wall to drilling holes in the cabinet bottom. mount the plate. NOTE: Before tightening toggle bolts and wood screw, make sure the tabs on the mounting plate touch the bottom of the cabinet or the horizontal level line when pushed flush against the wall and that the plate is properly centered under the cabinet. 22 49-2000492 Rev. 0

Installation Instructions INSTALLATION INSTRUCTIONS B. RECIRCULATING (Non-Vented Ductless) B3 ADJUST BLOWER EXHAUST B4 MOUNT THE KITCHEN HUB The unit is shipped in the top venting mode exhaust configuration. The vertical deflector plate should be repositioned to the angled position. 1. Remove damper mounting plate and diverter. CAUTION To avoid the risk of personal injury (back injury or other injuries due to excessive weight of the unit) or property damage, you will need two people to install this product. IMPORTANT: Do not put any pressure on front screen during installation. WARNING Risk of Electric Shock. Can cause injury or death: If installing unit with metal cabinets, cover the edge of the power supply cord hole with the nylon grommet in hardware 2. Install diverter in angled position and reinstall bag. damper mounting plate. NOTE: When mounting the appliance, thread power cord through hole in bottom of top cabinet. Keep it tight throughout Steps 1–3. Do not pinch cord or lift unit by pulling cord. 1. Lift appliance, tilt it forward, and hook slots at back bottom edge onto four lower tabs of mounting plate. 2. Rotate front of appliance up against cabinet bottom. 49-2000492 Rev. 0 23

Installation Instructions INSTALLATION INSTRUCTIONS B. RECIRCULATING (Non-Vented Ductless) (Cont.) B4 MOUNT THE KITCHEN HUB B5 FILTERS (Cont.) 1. Remove grease filter and install a charcoal filter ,QVHUWVHOIDOLJQLQJVFUHZV »Ǝ[  on each side of the motor as shown below. through outer top cabinet holes. Turn two full turns on each screw. Cabinet Front Cabinet Bottom Shelf Filler Block This Charcoal Equivalent distance Filter Mount to Depth can NOT of Cabinet exceed 2” Recess to ensure proper installation Self-Aligning Screw Unit Top 4. Tighten the two screws to the top of the unit. (While tightening screws, hold the unit in place against the wall and the top cabinet.) B6 FINALIZE INSTALLATION Plug in the unit. 24 49-2000492 Rev. 0

Installation Instructions INSTALLATION INSTRUCTIONS C. OUTSIDE BACK EXHAUST (Horizontal Duct) INSTALLATION OVERVIEW C1. Prepare Rear Wall C2. Attach Mounting Plate to Wall C3. Prepare Top Cabinet C4. Adjust Blower Exhaust C5. Mount the Kitchen Hub C6. Finalize Installation C1 PREPARING THE REAR WALL C2 ATTACH THE MOUNTING PLATE FOR OUTSIDE BACK EXHAUST TO THE WALL (Cont.) You need to cut an opening in the rear wall for 1. Remove the toggle wings from the bolts. outside exhaust. 2. Insert the bolts into the mounting plate through the holes designated to go into drywall and reattach the WRJJOHZLQJVWR»ƎRQWRHDFKEROW To use toggle bolts: Spacing for Toggles More Than Wall Thickness Toggle Wings Mounting Plate Toggle Bolt Bolt Wall End • Read the instructions on the REAR WALL 3. Place the mounting plate against the wall and insert TEMPLATE. the toggle wings into the holes in the wall to mount the plate. • Tape it to the rear wall, lining up with the holes previously drilled for holes A and B in the mounting NOTE: Before tightening toggle bolts and wood plate. screw, make sure the tabs on the mounting plate touch the bottom of the cabinet when pushed flush • Cut the opening, following the instructions of the against the wall and that the plate is properly centered REAR WALL TEMPLATE. under the cabinet. CAUTION Be careful to avoid pinching fingers C2 ATTACH THE MOUNTING PLATE between the back of the mounting plate and the wall. TO THE WALL 4. Tighten all bolts. Pull the plate away from the wall to help tighten the bolts. Attach the plate to the wall using toggle bolts. At least one wood screw must be used to attach the plate to a wall stud. 49-2000492 Rev. 0 25

Installation Instructions INSTALLATION INSTRUCTIONS C. OUTSIDE BACK EXHAUST (Horizontal Duct) (Cont.) C3 USE TOP CABINET TEMPLATE C4 ADJUST BLOWER EXHAUST FOR PREPARATION OF TOP The unit is shipped in the top exhaust configuration. CABINET To adjust the unit to back exhaust remove damper mounting plate and reposition such that opening is You need to drill holes for the top support screws in the back of the unit. and a hole large enough for the power cord to fit through. CAUTION Wear gloves to protect against sharp edges. 1. Remove 3 screws as shown and save. 2. Remove damper mounting plate by removing screws. • Read the instructions on the TOP CABINET TEMPLATE. • Tape it underneath the top cabinet. • Drill the holes, following the instructions on the TOP CABINET TEMPLATE. 3. Reposition damper mounting plate such that CAUTION Wear safety goggles when opening is in the back of the unit. 4. Reattach screws. drilling holes in the cabinet bottom. C5 ASSEMBLE AND INSTALL ADAPTER 1. Remove the tape from the damper. Make sure that the damper pivots easily before mounting the unit. You will need to make adjustments to assure proper alignment with your house exhaust duct after the unit is installed. 2. Position the unit damper to back of the unit and secure it with the screws that were removed. NOTE: Damper must hinge at the top as shown below. 26 49-2000492 Rev. 0

Installation Instructions INSTALLATION INSTRUCTIONS C. OUTSIDE BACK EXHAUST (Horizontal Duct) (Cont.) C6 MOUNT THE KITCHEN HUB C6 MOUNT THE KITCHEN HUB (Cont.) CAUTION To avoid the 2. Rotate front of unit up against cabinet bottom. risk of personal injury (back injury or other injuries due to 3. Insert 2 self-aligning screws (1/4”-28 x 3-1/4”) excessive weight of the unit) through top-center cabinet hole. Turn two full or property damage, you will turns on each screw. need two people to install Cabinet Front this product. Cabinet Bottom Shelf Filler Block IMPORTANT: Do not put any pressure on front screen during installation. This Equivalent distance to Depth can NOT WARNING Risk of Electric Shock. Can of Cabinet exceed 2” Recess to ensure cause injury or death: If installing unit with metal proper installation cabinets, cover the edge of the power supply Self-Aligning Screw cord hole with the nylon grommet in hardware Unit Top bag. 4. Tighten the 2 screws to the top of the unit. (While IMPORTANT: If filler blocks are not used, case tightening screws, hold the unit in place against damage may occur from overtightening screws. the wall and the top cabinet.) NOTE: When mounting the unit, thread power cord through hole in bottom of top cabinet. Keep it tight throughout Steps 1–3. Do not pinch cord or lift unit by pulling cord. 1. Lift unit, tilt it forward, and hook slots at back bottom edge onto four lower tabs of mounting plate. C7 FINALIZE INSTALLATION Plug in the unit. 49-2000492 Rev. 0 27

Installation Instructions TROUBLESHOOTING TIPS MAKE UP AIR TECHNOLOGY Note to Installers and Inspectors: This product comes equipped with a simple installation feature that limits maximum CFM levels in order to comply with certain local codes or regulations. This installation method may not be necessary for all installations, please refer to your local codes for further guidelines. CAUTION Appliance must be disconnected from main power prior to performing the conversion instructions listed below. Failure to do so could result in personal injury or damage to the product. To modify unit (if needed for local codes): 390CFM or 290CFM By design, the maximum blower speed is greater than 400 CFM. For local codes requiring reduced CFM, modify the wiring as described below: 1. Remove the filters. 2. Remove the control board box cover. 3. Locate the motor harness plugged into the control board. 4. A - For a maximum of 390 CFM Unit can operate with 4 speeds (Low, Medium, High, Boost). 1. Disconnect the connector of the blue wire from the red wire. Control Box Cover 2. Connect the 2 red wires together. B - For a maximum of 290 CFM Unit can operate with 3 speeds (Low, Medium, High). Disconnect the connector of the blue wire from Control Box the red wire. NOTE: Boost speed will be disabled. Unit will Motor Pin operate Low, Med & High only. 5. Reattach the control board box cover and install Filters, see Filters section. Note to Inspectors: To verify this product was installed in either configuration, check motor wiring connections as described above. Motor Harness Connector Red Blue Red Motor Harness 28 49-2000492 Rev. 0

Troubleshooting tips ... Before you call for service TROUBLESHOOTING TIPS Save time and money! Review the charts on the following pages first and you may not need to call for service. Problem Possible Cause What To Do Fan/Light does not A house fuse may be blown or a circuit Replace fuse or reset circuit breaker. operate when button is breaker tripped. turned ON Loud or abnormal Wrong duct size used in installation. This unit requires 8” ducting to perform optimally. airflow noise Using smaller duct pipe will cause reduced venting. Minimize the duct run length and number of transitions and elbows. GE Appliances service technicians cannot correct this issue if installed improperly. Fan fails to circulate Obstructions in duct work. Make sure nothing is blocking the vent. Make sure air or moves air slower your wall or roof cap has a blade or door. than normal and/or Damper blade on wall or roof cap may Make sure damper swings freely. Damper blades may fan is making loud or not be open. flip over and will not fully open when this happens. abnormal airflow noise Adjust to original position. Metal grease filter and charcoal filter (if Clean the metal grease filter and replace charcoal filter present) may be dirty. (if present). See Care and Cleaning. Insufficient makeup (replacement) air Sufficient makeup (replacement) air is required for exhausting appliances to operate to rating. Check with local building codes, which may require or strongly advise the use of makeup air. Visit GEAppliances.com for available makeup air solutions. Fan keeps going off The motor is probably overheating and Check to be sure the filters are clean. If off and on and on turning itself off. This can be harmful to cycling continues, call for service. the motor. 49-2000492 Rev. 0 29

GE Appliances Limited Warranty LIMITED WARRANTY GEAppliances.com All warranty service is provided by our Factory Service Centers, or an authorized Customer Care® technician. To schedule service online, visit us at geappliances.com/service_and_support/, or call GE Appliances at 800.GE.CARES (800.432.2737). Please have your serial number and your model number available when calling for service. Servicing your appliance may require the use of the onboard data port for diagnostics. This gives a GE Appliances factory service technician the ability to quickly diagnose any issues with your appliance and helps GE Appliances improve its products by providing GE Appliances with information on your appliance. If you do not want your appliance data to be sent to GE Appliances, please advise your technician not to submit the data to GE Appliances at the time of service. For the period of GE Appliances will replace One year Any part of the cooking product which fails due to a defect in materials or workmanship. From the date During this limited one-year warranty, GE Appliances will provide, free of charge, all labor of the original and related service costs to replace the defective part. purchase What GE Appliances will not cover: Ŷ Service trips to your home to teach you how to use Ŷ Damage to finish, such as surface rust, tarnish, or small the product. blemishes not reported within 48 hours of delivery. Ŷ Improper installation, delivery, or maintenance. Ŷ Incidental or consequential damage caused by Ŷ Failure of the product if it is abused, misused, possible defects with this appliance. modified, or used for other than the intended purpose Ŷ Damage caused after delivery. or used commercially. Ŷ Product not accessible to provide required service. Ŷ Replacement of house fuses or resetting of circuit Ŷ Service to repair or replace light bulbs, except for LED breakers. lamps. Ŷ Damage to the product caused by accident, fire, floods, or acts of God. EXCLUSION OF IMPLIED WARRANTIES Your sole and exclusive remedy is product repair as provided in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law. Staple your receipt here. Proof of the original purchase This limited warranty is extended to the original purchaser and any succeeding owner for products purchased for home date is needed to obtain service under the warranty. use within the USA. If the product is located in an area where service by a GE Appliances Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Appliances Service location for service. In Alaska, the limited warranty excludes the cost of shipping or service calls to your home. Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General. Warrantor: GE Appliances, a Haier company Louisville, KY 40225 Extended Warranties: Purchase a GE Appliances extended warranty and learn about special discounts that are available while your warranty is still in effect. You can purchase it online anytime at geappliances.com/service_and_support/shop-for-extended-service-plans.htm or call 800.626.2224 during normal business hours. GE Appliances Service will still be there after your warranty expires. 30 49-2000492 Rev. 0

Accessories ACCESSORIES Looking For Something More? GE Appliances offers a variety of accessories to improve your cooking and maintenance experiences! Refer to the Consumer Support page for phone numbers and website information. The following products and more are available: Parts Make-up Air Kit Charcoal Filter Bump Out Kit Filler Kit Cleaning Supplies CitruShine™ Stainless Steel Wipes CERAMA BRYTE® Stainless Steel Appliance Cleaner Bar Keepers Friend Soft Cleanser™ 49-2000492 Rev. 0 31

Consumer Support CONSUMER SUPPORT GE Appliances Website Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day, any day of the year! You can also shop for more great GE Appliances products and take advantage of all our on-line support services designed for your convenience. In the US: GEAppliances.com Register Your Appliance Register your new appliance on-line at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise. You may also mail in the pre-printed registration card included in the packing material. In the US: GEAppliances.com/register Schedule Service Expert GE Appliances repair service is only one step away from your door. Get on-line and schedule your service at your convenience any day of the year. In the US: GEAppliances.com/service or call 800.432.2737 during normal business hours. Extended Warranties Purchase a GE Appliances extended warranty and learn about special discounts that are available while your warranty is still in effect. You can purchase it on-line anytime. GE Appliances Services will still be there after your warranty expires. In the US: GEAppliances.com/extended-warranty or call 800.626.2224 during normal business hours. Remote Connectivity For assistance with wireless network connectivity (for models with remote enable), visit our website at GEAppliances.com/connect or call 800.220.6899 in the US. Parts and Accessories Individuals qualified to service their own appliances can have parts or accessories sent directly to their homes (VISA, MasterCard and Discover cards are accepted). Order on-line today 24 hours every day. In the US: GEApplianceparts.com or by phone at 877.959.8688 during normal business hours. Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause unsafe operation. Contact Us If you are not satisfied with the service you receive from GE Appliances, contact us on our Website with all the details including your phone number, or write to: In the US: General Manager, Customer Relations | GE Appliances, Appliance Park | Louisville, KY 40225 GEAppliances.com/contact Printed in China 32 49-2000492 Rev. 0


Document Created: 2019-02-22 16:59:26
Document Modified: 2019-02-22 16:59:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC