15_PT860 UserMan

FCC ID: ZJP-RD0605

Users Manual

Download: PDF
FCCID_4079431

Party Speaker User’s Guide for Model PT860 Important Safety Instructions a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, CAUTION Warning: To reduce the risk of electric shock, do not remove cover (or back). No RISK OF ELECTRIC SHOCK DO NOT OPEN • Read these Instructions. may cause harmful interference to radio communications. However, there is • Keep these Instructions. no guarantee that interference will not occur in a particular installation. If this ATTENTION user-serviceable parts inside. Refer servicing • Heed all Warnings. equipment does cause harmful interference to radio or television reception, which RISQUE D' ÉLECTROCUTION NE PAS OUVRIR to qualified service personnel. can be determined by turning the equipment off and on, the user is encouraged to • Follow all instructions. try to correct the interference by one or more of the following measures: • Do not use this apparatus near water. • Reorient or relocate the receiving antenna. The exclamation point within an equilateral • Clean only with a dry cloth. • Increase the separation between the equipment and receiver. triangle is intended to alert the user to • Do not block any ventilation openings. Install in accordance with the • Connect the equipment into an outlet on a circuit different from the presence of important operating and manufacturer’s instructions. that to which the receiver is connected. maintenance (servicing) instructions in the • Do not install near any heat sources such as radiators, heat registers, stoves, or • Consult the dealer or an experienced radio/TV technician for help. literature accompanying the appliance. other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type Additional Warnings and Precautions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to plug has two blades and a third grounding prong. The wide blade or the third • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE prong are provided for your safety. When the provided plug does not fit into OF PLUG TO WIDE SLOT, FULLY INSERT. alert the user to the presence of un-insulated your outlet, consult an electrician for replacement of the obsolete outlet. • Mains plug is used as disconnect device and it should remain readily operable “dangerous voltage” within the product’s • Protect the power cord from being walked on or pinched particularly at plugs, during intended use. In order to disconnect the apparatus from the mains enclosure that may be of sufficient magnitude convenience receptacles, and the point where they exit from the apparatus. completely, the mains plug should be disconnected from the mains socket to constitute a risk of electric shock to persons. • Only use attachments/accessories specified by the manufacturer. outlet completely. • Unplug this apparatus during lightning storms or when unused for long • WARNING: Shock hazard - Do Not Open. periods of time. • CAUTION: Use of controls or adjustments or performance of procedures This symbol indicates that this product • Refer all servicing to qualified service personnel. Servicing is required other than those specified may result in hazardous radiation exposure. incorporates double insulation between when the apparatus has been damaged in any way, such as power-supply • WARNING: Changes or modifications to this unit not expressly approved by hazardous mains voltage and user accessible cord or plug is damaged, liquid has been spilled or objects have fallen into the party responsible for compliance could void the user’s authority to operate parts. the apparatus, the apparatus has been exposed to rain or moisture, does not the equipment. operate normally, or has been dropped. • WARNING: Do not place this unit directly onto furniture surfaces with any • Use only with a cart, stand, tripod, bracket, or table specified by type of soft, porous, or sensitive finish. As with any rubber compound made the manufacturer, or sold with the apparatus. When a cart is used, with oils, the feet could cause marks or staining where the feet reside. We WARNING: This product can expose you to use caution when moving the cart/apparatus combination to avoid recommend using a protective barrier such as a cloth or a piece of glass chemicals including lead, which is known to injury from tip-over. between the unit and the surface to reduce the risk of damage and/or staining. the State of California to cause cancer. For • WARNING: Do not ingest battery, chemical burn hazard. more information go to: www.P65Warnings. FCC Warnings • Battery shall not be exposed to excessive heat such as sunshine, fire or the like. ca.gov This product meets and complies with Warning: Changes or modifications to this unit not expressly approved by the all Federal regulations. party responsible for compliance could void the user’s authority to operate the • Lithium batteries, like all rechargeable batteries, are recyclable and should equipment. be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste and they should never NOTE: This equipment has been tested and found to comply with the limits be incinerated, as they might explode. Contact your local government for for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits disposal or recycling practices in your area. are designed to provide reasonable protection against harmful interference in Overview Features Control Panel • Bluetooth wireless - range 60 ft. 1. Battery Charge LED (red): Light is solid when 11. /10±/M± : Short press to skip audio battery is charging, and Green when the tracks (BLUETOOTH/USB) or radio presets (FM). • Voice prompts announce speaker functions battery is fully charged. Long press to scan for the next available FM • Single 8” speaker and single 2” high pitch radio station (FM). Long press and hold to skip speaker 2. Power ON/OFF: Press and hold to power the speaker ON or OFF. 10 audio tracks (USB). • Built-in amplifier 3. USB Media Port 12. Display: Shows battery level, FM radio • LED display frequency or audio track info, and volume • Digital FM radio 4. USB Power Port (5V 1A): Charge devices. settings for the speaker and microphones. • 2x Microphone input 5. Aux In (3.5mm Audio Input) 13. Pair/ : Press and hold to begin pairing to a • 3.5mm Aux In 6. Microphone Jacks: When in use, the Bluetooth device (BLUETOOTH). Press to play or • USB port - supports MP3 file format microphones will always be heard, regardless pause tracks (BLUETOOTH, USB). • USB port for mobile device charging (5V 1A) of the source input. 14. Scan: Press and hold to scan FM radio stations • Built-in rechargeable battery 7. DC Power Input: Use to charge the internal and automatically save them as presets (FM). battery and power the speaker. 15. Equalizer: Press to adjust between Pop, • Battery life: approx. 3 hrs playtime 8. Bluetooth Indicator LED (blue): Light will Classical, Jazz, Flat, and Rock. Includes flash when connecting and turn solid when 16. Volume: Press to adjust the volume of the • 3.5mm audio cable (doubles as FM antenna) connected. speaker or the volume of the microphones in • AC/DC power adapter (included) for internal 9. Source: Press to change audio source between Mic Vol settings. battery recharge Bluetooth, Line In, and FM. • User’s Guide 10. Mic Vol: Press to adjust Microphone Volume (n), Echo (E), and Speaker Volume (v). Use the Volume buttons to adjust each setting. 1 2 3 4 5 6 7 Lift Handle (rear view) Lift Up Push Here 8 9 10 11 12 13 14 15 16

Charging the Battery USB To power the unit or charge the internal battery, plug the AC/DC power adapter 1. Load a USB drive into the USB Media port. into the DC Power Input on the speaker and a standard power outlet. Battery life is approximately 3 hours. 2. Press Source to switch to USB Mode (“USB” on the display) . To charge mobile devices, use an appropriate USB charging cable (not included) 3. Use the controls on the speaker to select and play audio from the to connect the USB charging plug on the unit and the device you wish to charge. connected drive. Aux In Requires a 3.5mm audio cable (included). 1. Connect a 3.5mm audio cable to the Aux In on the unit and the audio output/headphone jack on an audio device. 2. Press Source to switch to Line In Mode (“LINE” on the display). 3. Use the controls on the connected device to select and play audio. Bluetooth Wireless Pairing & Playing Audio After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the steps listed here. 1. Press the Source button to select Bluetooth Mode. The pairing indicator will begin slowly flashing and a voice will announce “Bluetooth Mode”. 2. Press and hold to begin pairing. The pairing indicator will begin FM Radio quickly flashing. Remain within 3 feet of the unit. 3. Using the controls on your Bluetooth device, scan for and select ISB659 in Radio Reception and the 3.5mm Audio Cable your Bluetooth settings to pair. If your device requests a password, enter the An FM receiver is built into the speaker but functions best when a 3.5mm audio default password 0 0 0 0 . Refer to the user’s manual for your specific device for cable (included) is connected to the speaker. Adjust the position of the cable and instructions on pairing and connecting Bluetooth devices. the speaker to improve FM radio reception. 4. When successfully paired, the pairing indicator will turn solid, a voice will Radio Tuning and Saving Station Presets announce the connection, and an audible chime will sound from the unit. 5. Use the controls on the connected device to select and begin playing audio. 1. Press the Source button to switch to FM Radio Mode. The display will show Audio played through the connected Bluetooth device will now be heard the station frequency, Ex: 101.1. through the speaker. Use the controls on the speaker or the connected 2. Press and hold Scan to scan and save radio stations automatically. Radio device to play, pause, and adjust volume. stations will be assigned a “Pxx” number. 3. Press and hold to tune the frequency manually. Customer Support To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de Made apoyo en: www.iLiveElectronics.com Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment Green posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com Protect for Today Copyright © 2018 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Sustain for Tomorrow Specifications are subject to change without notice.

FCC ID: ZJP-RD0605 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter


Document Created: 2018-11-19 11:33:23
Document Modified: 2018-11-19 11:33:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC