BGR135_manual

FCC ID: ZERBGR135

Users Manual

Download: PDF
FCCID_2374851

BGR135 1D and 2D BCBP Boarding Gate Reader Product Specification Revision 1 Page 1 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

About this manual BGR135 - Installation and Use First Edition (Jan 2011) (c) 2011 Access Ltd. Part No. BGR135 www.access-is.com All rights reserved. Whilst every precaution has been taken in the preparation of this manual, Access Ltd assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. We reserve the right to change the specifications, functions and circuitry of the product without notice. All trademarks acknowledged. Warnings This manual contains important information regarding the installation and operation of the BGR135 Boarding Gate Reader. For safe and reliable operation of the product, all users must ensure that they are familiar with and fully understand all instructions contained herein. Warranty Access Ltd warrants that this product shall be free from defects in workmanship and materials for a period of one year from the date of original purchase. If the product should fail to operate correctly in normal use during the warranty period, Access will replace or repair it free of charge. No liability can be accepted for damage due to misuse or circumstances outside Access control. Also Access will not be responsible for any loss, damage or injury arising directly or indirectly from the use of this product. Access total liability under the terms of this warranty shall in all circumstances be limited to the replacement value of this product. If any difficulty is experienced in the installation or use of this product that you are unable to resolve, please contact Access. Trademarks All trademarks mentioned in this manual are acknowledged to be the property of the respective trademark owners.Access Keyboards is a registered trademark of Access Keyboards Limited. IBM, PC/AT, PS/2 are registered trademarks of International Business Machines Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Page 2 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

Radio Frequency Energy European EMC directive 89/336/EEC FCC Compliance Statement (United States) This equipment has been tested and found to This equipment generates, uses and can radiate comply with the limits for a class A computing radio frequency energy and if not installed and device in accordance with the specifications in the used properly, that is, in strict accordance with the European standard EN55022. These limits are manufacturer’s instructions, may cause designed to provide reasonable protection against interference to radio communication. It has been harmful interference. This equipment generates, tested and found to comply with the limits for a uses and can radiate radio frequency energy and class A computing device in accordance with the if not installed and used in accordance with the specifications in Subpart J of part 15 of FCC rules, instructions may cause harmful interference to which are designed to provide reasonable radio or television reception. However, there is no protection against such interference when the guarantee that harmful interference will not occur equipment is operated in a commercial in a particular installation. If this equipment does environment. Operation of this equipment in a cause interference to radio or television reception, residential area may cause interference, in which which can be determined by turning the equipment case the user at his own expense will be required on and off, the user is encouraged to correct the to take whatever measures may be necessary to interference with one or more of the following correct the interference. Changes or modifications measures (a) Reorient or relocate the receiving not expressly approved by the manufacturer could antenna. (b) Increase the separation between the void the user’s authority to operate the equipment. equipment and the receiver. (c) Connect the equipment to an outlet on a circuit different from Canadian Department of Communications RFI that to which the receiver is connected. (d) Consult statement the supplier or an experienced radio / TV This equipment does not exceed the class A technician for help. limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le règlement sur le brouillage radioélectriques publié par le ministère des Communications du Canada. Revision History Rev 1 Jan 2011 Original Page 3 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

Contents Contents 1. Overview .............................................................................................................................. 5 2. Specifications ....................................................................................................................... 6 2.1 BGR ................................................................................................................................................ 6 2.2 Bi-colour LEDs ............................................................................................................................... 6 2.3 Internal Sounder ............................................................................................................................. 6 3. Data Format Protocol ........................................................................................................... 8 4. Installation ............................................................................................................................ 9 4.1 BGR Connection ............................................................................................................................ 9 4.2 BGR Configuration ....................................................................................................................... 10 5. Operation ........................................................................................................................... 11 5.1 Barcode Reading .......................................................................................................................... 11 6. Maintenance…………………………………………………………………………………………………..12 Page 4 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

1. Overview The Access BGR135 is a compact Boarding Gate Reader for 2D Bar Coded Boarding Passes and NFC device. The BGR135 features  Fixed focal length, regardless of bar code size. The operator does not have to find the optimum reading position.  Omni-directional reading. The bar code may be inserted at any angle.  Wide document throat. The imager can read a bar code printed at any position on an A4 (European) or Letter (American) document.  Programmable visible and audible indication give an easy “go / no-go” indication to the operator.  Robust unit with a small footprint, which may be easily secured to the check-in desk using the optional quick-release bracket (see section 4.2)  Compatible with dedicated airline and common-user departure control systems. Highly visible red/green LEDs and audible alarm provide positive read confirmation to the agent. VFD display can be easily read over a wide range of angles, and in bright ambient lighting conditions. Wide document throat facilitates reading of barcode at any position on an A4 document. Omni-directional and fixed-focus design allows easy and instant reading of linear and 2D bar codes regardless of size and orientation. Wide reception area reads NFC cards and phones quickly and easily. Can read barcodes from most mobile phones or PDAs. Can read linear barcodes of up to 80mm presented At any angle. It may be possible to read longer linear barcodes up to a maximum of approximately 90mm by presenting them at an angle as shown. Page 5 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

2. Specifications 2.1 BGR Dimensions Length 185mm Height 142mm Width 130mm Weight 750g (excluding cable) Colour Dark Grey Environmental Operating temperature 0º to 50ºC Storage temperature 0º to 60ºC Humidity 0 to 95%, non-condensing Power Requirements 9V to 15V DC. BGR135 is supplied with a “universal” AC power supply, 100-240V 50/60Hz Electrical Interface Serial (RS-232) Bar Codes Linear Code 2 of 5, Interleaved 2 of 5, IATA 2 of 5, Code 3 of 9, Code 128 2D PDF417, QR, Aztec, DataMatrix Performance Will read in full sunlight. Can read bar codes from most mobile phone and PDA displays. MTBF 85 000 hours Approvals FCC Class B CE EMC Class B CE Low Voltage Directive IEC60825-1 LED Safety Class 1 2.2 Bi-colour LEDs A green LED of programmable duration is illuminated in response to a message from the host computer indicating that a valid boarding pass has been accepted. A red LED of programmable duration is illuminated in response to a host message indicating that the boarding pass was invalid. 2.3 Internal Sounder The BGR135 contains a sounder whose pitch and duration can be programmed for “accept” and “reject”, and which may be addressed by the host computer. Page 6 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

2.4 Display The BGR135 contains a 2 line x 16 character VFD display, which may be addressed by the host computer. Page 7 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

3. Data Format Protocol The BGR135 will normally be delivered factory-configured to work within the common use or shared environment specified by the customer. It has been certified by SITA, ARINC, Ultra and RESA, and complies with AEA2009 specifications, including 2D symbologies and headers. For non-common use or shared applications, or for assistance with changing the host protocol, please contact Access sales department on +44 118 966 3333 or email sales@access-is.com. Page 8 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

4. Installation 4.1 BGR Connection The BGR135 connects by means of an RJ-50 10-pin modular socket on the back of the unit. To connect the BGR135 cable, push the connector into the host socket until you hear a click. The host socket is clearly marked as can be located closest to the power switch. To remove the cable the connecting lug must be depressed while the cable is gently pulled to disconnect it. The BGR135 is supplied with the following accessories 5KBD172102 Serial and Power Cable PSU12V2A Universal AC Power Supply Page 9 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

These are connected as depicted below The BGR135 features a RJ45 port for receipt printing functionality as well as an on/off switch. Both are located to the rear base of the unit – see attached illustration. 4.2 BGR Configuration The BGR135 serial port configuration, including the host protocol, may be achieved in either of the following ways 1/ Using the Access “ZippyTools” utility. 2/ Using a configuration barcode provided by Access. Page 10 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

5. Operation 5.1 Barcode Reading To read a bar coded boarding pass, place the document face-up into the bar code reader zone. As soon as a document is detected, the bar code reader’s LEDs will illuminate the document (a bar code on a mobile phone or PDA will be automatically illuminated at a lower level than a bar code on a paper document). The bar code imager is omni- directional, and a well-printed document should be read almost immediately. Better read performance will be achieved if the document is held flat on the surface under the bar code reader. The boarding application will determine if the document is valid, and a message will be sent to the operator message display. Either the green LED (OK to Board) or the red LED (Do Not Board) will be illuminated. Page 11 of 12 Revision 1  Access Limited 2011 - All Rights Reserved

6.0 Maintenance Limited maintenance of the BGR135 is required as essentially the unit is free from moving parts and the glass window is protected. General, monthly cleaning of the sensor window and imager window (underside of unit) is recommended to remove any dust and build up of debris. Page 12 of 12 Revision 1  Access Limited 2011 - All Rights Reserved


Document Created: 2014-02-10 09:12:25
Document Modified: 2014-02-10 09:12:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC