Users Manual

FCC ID: Z9G-EDF73

Users Manual

Download: PDF
FCCID_3959665

Manual Edition 1.0, June 2018 IB-200-S1000A-00 S1000A Edifier International Limited Smart Home Speaker P.O. Box 6264 General Post Office Hong Kong Tel: +852 2522 6989 Fax: +852 2522 1989 www.edifier.com © 2018 Edifier International Limited. All rights reserved. Printed in China NOTICE: For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. Picture for reference only, actual product prevails. User manual | Manuel d’utilisateur | Manual de usuario | Bedienungsanleitung | Manuale dell’utente | Manual do utilizador Important safety instruction Important safety instruction 1. Please read the instructions carefully. Keep it in safe place for future reference. Power warning: 2. Use only accessories approved by the manufacturer. 1. Place the product near the power outlet for easy use. 3. Install the instrument properly by following the instructions in the device connection section. 2. Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can 4. Using the product in a 0-35℃ environment is recommended. be found on the product plate. 5. To reduce the risk of fire and electric shock, do not expose the product to rain or moisture. 3. For safety purpose, unplug the product during lightning storms or when unused for extended periods of time. 6. Do not use this product near water. Do not immerge the product into any liquid or have it exposed to dripping or splashing. 4. Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution. 7. Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat). 5. Safety warning labels on the housing or bottom of the product or power adaptor. 8. Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles be placed on the product. 9. Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric This symbol is to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure shock. that may be of sufficient magnitude to constitute a risk of electric shock to persons. 10. Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is recommended). 11. Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable is oriented to the right direction. part inside. Take the product to an authorized service center for repair. 12. Keep the provided accessories and parts (such as screws) away from children to prevent from being swallowed by mistake. 13. Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless This symbol indicates that the product is for indoor use only. the cause of damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional immediately. This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth requirement. 14. Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first. 15. Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral solvent or clear water for cleaning. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. Excessively loud music may lead to hearing loss. Please keep the volume in a safe range. For wireless product: 1. Wireless product may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or medical equipment. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household 2. Turn off the product when it’s disallowed. Do not use the product in medical facilities, on airplane, at gas stations, near wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, automatic gates, automatic fire alarm system or other automated devices. recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the 3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves may affect the normal operation return and collection systems or contact the retailer where the product was purchased. They can take this product for of the pacemaker or other medical devices. environmental safe recycling. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 1 2 English English Unpack the box Illustrations Box Contents Passive speaker 1 2 7 3 8 4 9 5 10 6 11 12 1. Volume control/Input selection, with built-in 6. Power cable Active speaker multifunctional button 7. PC/AUX input User manual Remote control Rotate: volume control 8. Optical input Press: input selection 9. Coaxial input Press and hold: Disconnect Bluetooth (Bluetooth mode) 10. Connect to passive speaker Wi-Fi network connection (Wi-Fi mode) 11. Connect to active speaker 2. Treble adjustment 12. LED display window RCA - RCA audio cable Speaker connecting cable 3. Bass adjustment Press the “Volume control/Input selection” dial to 4. Wi-Fi system reset switch and display: PC - AUX - OPT - COAX- - 5. Power switch 3.5mm - RCA audio cable Fiber optic input audio cable 3 4 English English Remote control Illustration Remote control Illustration Point the remote control to the remote receiving window on the speaker, the optimum operational distance is within 7 meters. When the system receives remote control commands, displayed value of display window will alert or flash. 1. As the illustration shows, press remote control battery cover downward with thumb and follow the arrow direction to remove cover, and place two AAA batteries (note the “+” and “-” pole) 1. Power ON/OFF into the remote control. ③ Cannot be turned off when not in Wi-Fi mode 2. The battery life is normally about 6 months; please replace it ① ② Default mode: Wi-Fi mode when the remote control is not sensitive or the control distance ④ OPT COAX ⑤ 2. Mute to be shortened. 3. Remote control indicator 3. Never use old and new batteries together. ⑥ 4. Optical input ⑦ ⑧ 5. Coaxial input Note: 6. Previous/next track (Bluetooth/Wi-Fi audio source) 1. Do not place the remote control in places that are hot and humid. ⑨ ⑩ 2. Do not charge the batteries. AUX PC 7. Volume up/down 3. Remove the batteries when unused for a long period of time to 11 12 8. Play/pause (Bluetooth/Wi-Fi audio source) avoid battery leakage. Press and hold to turn on/off Wi-Fi hotspot 4. The battery should not be exposed to excessive heat such as 9. AUX input direct sun, fire or similar. 10. PC input 5. Danger of explosion if battery is incorrectly replaced. Replace 11. Press to switch to Wi-Fi mode only with the same or equivalent type. Press and hold to perform Wi-Fi network connection 12. Bluetooth input Press and hold to disconnect Bluetooth 5 6 English English Connection Audio source Input PC/AUX input Blu-ray player AUX PC or 1. Press the “PC” / “AUX” button on the remote control, or press the “Volume control/Input selection” dial on the rear panel of the active speaker to select PC/AUX input mode, the corresponding audio source indicator on the active speaker will be lit. 2. Connect audio source (like mobile phone, tablet, etc.) to AUX input port (note color matching) on the rear panel of the active speaker using audio cable. 3. Play music and adjust the volume to a desirable level. Optical/Coaxial input OPT COAX or 1. Press the “OPT” / “COAX” button on the remote control, or press the “Volume control/Input selection” dial on the 1. Connect speakers using speaker connecting cable. rear panel of the active speaker to select optical/coaxial input mode, the corresponding audio source indicator on 2. Connect the active speaker to power source using power cable and turn on the active speaker will be lit. power switch, LED light will be lit and the speaker should be ready to go. 2. Connect audio source (like Blu-ray player, Set Top Box, etc.) to optical input port on the rear panel of the active speaker using fiber optic input audio cable. 3. Connect to audio sources using the corresponding audio cable. 3. Play music and adjust the volume to a desirable level. Note: Only the standard PCM audio signals (44.1KHz/48KHz/96KHz/192KHz) function in optical/coaxial mode. 7 8 English English Bluetooth Input Wi-Fi Audio Source EDIFIER S1000A or or Wi-Fi audio source Press the “ ” button on the remote control, or press the “Volume control/Input selection” dial on the rear panel of the active speaker to select Wi-Fi mode, the corresponding audio source indicator on the active speaker will be lit. 1. Press the “ ” button on the remote control, or press the “Volume control/Input selection” dial on the rear panel of the active speaker to select Bluetooth mode, the corresponding audio source indicator on the active speaker will be lit. Hotspot management 2. Set your Bluetooth device (mobile phone, tablet etc.) to search for and connect to “EDIFIER S1000A”. 1. As S1000A has self hotspot, it can help you to expand Wi-Fi signal range and make Wi-Fi signal and music cover your home. Note: a. Make sure S1000A has been connected to network. * The Bluetooth function of S1000A can only be searched and connected in Bluetooth mode. The current Bluetooth b. Go to your phone’s WLAN or Wi-Fi settings to search for hotspot “EDIFIER_S1000A_xxxx”, and xxxx is the last connection will be disconnected once the speaker switches to other audio inputs. When switched back to Bluetooth four digits of the device MAC address. mode, the speaker will try to connect to the last connected Bluetooth device. 2. Click “EDIFIER_S1000A_xxxx” and input the default password “12345678”. * Pin code for connection is “0000” if needed. 3. This hotspot supports connecting 8 mobile devices at the same time, please connect as much as you like! * To disconnect Bluetooth, press and hold the “Volume control/Input selection” dial on the rear panel of the active speaker or the “ ” button on the remote control Note: * To enjoy all Bluetooth functions of this product, please ensure your audio source device has A2DP and AVRCP profiles. If needs to modify the password, change the hotspot name, upgrade the firmware of the wireless part of the product, * Bluetooth connectivity and compatibility may be different between different source devices, depending on the software and upgrade the MCU program, please visit “10.10.10.254” via phone browser for modification and upgrade after versions of source devices. connected to hotspot. * The built-in Qualcomm® aptX™ decoder in the product helps to achieve better wireless transmission sound quality, therefore please use the device supporting Qualcomm® aptX™ as the audio source. 9 10 English English Download and Install App Guide the Speaker to Connect to Wi-Fi Network 2. Go to your phone's Wi-Fi settings and select the 3. Enter the default password “12345678”, then To enjoy all functions of the smart speaker, please download our App and guide the speaker to connect to Wi-Fi Wi-Fi starting with EDIFIER_S1000A to connect. the phone is connected to S1000A Wi-Fi network. network via this App. Please download the “EDIFIER HOME” App in the App store. Note: When guiding the speaker to connect to Wi-Fi network, ensure your phone or tablet has been connected to the Wi-Fi network you would like the speaker to connect to. Guide the Speaker to Connect to Wi-Fi Network Enter the Settings password 1. Press the “ ” button on the remote control, or press the “Volume control/Input selection” dial on the speaker to select Wi-Fi audio source. 4. The principle of connecting the speaker to network via APP is to broadcast the network name and password the or phone already connected to the speaker. Therefore, after entering the configuration interface: please enter Wi-Fi password the phone already connected into the text box, and note that the speaker will not connect to the wanted Wi-Fi network if the password is wrong. In the network name textbox, it will display the Wi-Fi network name the phone connected by default, if needs to modify, Please enter Wi-Fi it is recommended to switch to the phone’s configuration password the phone interface, then reconnect to Wi-Fi network and make already connected configurations again. 11 12 English English Guide the Speaker to Connect to Wi-Fi Network Audio Source Mode 1: EDIFIER HOME Cloud Music Playing 5. Search for Edifier wireless Hi-Fi system. 6. The speaker is connecting to network. Operating Guide The relationship between EDIFIER HOME APP and the speaker: the App is actually an advanced interface of the speaker; the user can customize the speaker to fit a specific application environment via App, and can choose the favorite radio station or music source by controlling playing via App. Search Find your favorite music by searching song titles, singers and albums. Searching for device Connecting Favorites When browsing, press “ ” to add to my favorites; and in playing interface press “ ” to add to my favorites. Press to add device My Music Choose to play local music, my song list, and recent play. TuneIn Listen to my radio station, local radio station, music, talk shows and sports, and listen by location. 7. Press to select “EDIFIER_S1000A_xxxx”, and xxxx is the last four digits of the device MAC address. After the Amazon Alexa network connection is successful and completing the binding, Press “Amazon Alexa” to sign in with Amazon account and enter Amazon Alexa interface; the phone’s Wi-Fi will switch to the original network, then Bind successfully Press the “In APP Alexa” button to speaker to Alexa; the speaker can be normally used. You can take an easily Press and hold the “ ” to speak a channel (also can be a song or an album) or checking whether and then recognizable name for the speaker. release, it will start searching or playing according to voice input. Note: Add More Services After the network connection is successful and completing the Select to add: online radio station, iHeartRadio, Spotify, TIDAL and Nepster. binding, if the phone’s Wi-Fi cannot switch to the original network automatically, please switch manually. 13 14 English English Audio Source Mode 1: EDIFIER HOME Cloud Music Playing Audio Source Mode 2: Line in Input Instructions for how to use Spotify Connect Listen out loud with Spotify Connect 1. Connect your S1000A to your wifi network 2. Open up the Spotify app on your phone, tablet or laptop using the same wifi network 3. Play a song and select Devices Available The user can control the speaker to switch to line in input and optical input via 4. Select your S1000A and start listening EDIFIER HOME APP, please refer to “PC/AUX Input” “Optical/coaxial Input” in page 8 to play wired music. The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses Sign in with Amazon account and visit the cloud audio library to select what you like. Sign in with Amazon 15 16 English English Specification Troubleshooting Power output: R/L (Treble): 25W+25W Problem Solution R/L (Mid-range and bass): 35W+35W No sound • Check if the power indicator light is ON. Frequency response: 48Hz~20KHz • Try to turn up the volume using either the master volume control or remote control. Input: Wi-Fi / Bluetooth / Optical / Coaxial / PC / AUX • Ensure the audio cables are firmly connected and the input is set correctly on the speakers. • Check if there is a signal output from the audio source. Wi-Fi: 2.412-2.462GHz (US) Cannot connect via Bluetooth • Make sure the speaker is switched to Bluetooth input. If it is in other 2.412-2.472GHz (EU) audio input modes, Bluetooth will not connect. Disconnect from any Bluetooth device by pressing and holding in Bluetooth: 2.402-2.480GHz Bluetooth mode, then try again. • Effective Bluetooth transmission range is 10 meters; please ensure that operation is within the range. There is no restriction of use. • Try another Bluetooth device for connection. Network pairing and connection • Please ensure that the router has enabled DHCP (Dynamic host is unsuccessful configuration protocol) function. • Please ensure that the IP address number of router is not limited; needs to allow for connecting multiple devices. • Please ensure that the router does not use enterprise level encryption (including WPA and WPA2). • Please ensure that the router does not use IP binding mechanism. • Please ensure that the specified target network is 2.4G network. Device registration fails (3084) • Go to the settings page and log in again to reconnect network. The S1000A does not turn on • Check if main power is connected, or if the wall outlet is switched on. To learn more about EDIFIER, please visit www.edifier.com For Edifier warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms. USA and Canada: service@edifier.ca 17 South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information. 18 English English

FCC Regulatory Compliance Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ISED Regulatorycompliance This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur exempt de licencecontenudans le présentappareilestconforme aux CNR d’Innovation, Sciences et Développementéconomique Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes : L’appareil ne doit pas produire de brouillage; L’appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cetéquipementestconforme aux limitesd'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Cetéquipementdoitêtreinstallé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.


Document Created: 2018-08-10 09:20:40
Document Modified: 2018-08-10 09:20:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC