Test Report DSS

FCC ID: Z64-WL18SBMOD

Test Report

Download: PDF
FCCID_2746994

FCC RF Test Report Report No. : FR4O2349A Varient FCC RF Test Report APPLICANT : Texas Instruments Incorporated EQUIPMENT : WiFi and Bluetooth Module BRAND NAME : Texas Instruments MODEL NAME : WL18MODGB FCC ID : Z64-WL18SBMOD STANDARD : FCC Part 15 Subpart C §15.247 CLASSIFICATION : (DSS) Spread Spectrum Transmitter The product was received on Oct. 23, 2014 and testing was completed on Aug. 14, 2015. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Joseph Lin / Supervisor Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan District, Tao Yuan City, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 1 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A TABLE OF CONTENTS REVISION HISTORY.......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Product Feature of Equipment Under Test ........................................................................................ 5 1.4 Product Specification subjective to this standard .............................................................................. 6 1.5 Modification of EUT ........................................................................................................................... 6 1.6 Testing Location ................................................................................................................................ 7 1.7 Applicable Standards ......................................................................................................................... 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST........................................................................ 8 2.1 Descriptions of Test Mode ................................................................................................................. 8 2.2 Test Mode .......................................................................................................................................... 9 2.3 Connection Diagram of Test System ............................................................................................... 10 2.4 Support Unit used in test configuration and system ........................................................................ 10 2.5 EUT Operation Test Setup .............................................................................................................. 10 2.6 Measurement Results Explanation Example ................................................................................... 11 3 TEST RESULT .......................................................................................................................................... 12 3.1 Peak Output Power Measurement .................................................................................................. 12 3.2 Radiated Band Edges and Spurious Emission Measurement ........................................................ 14 3.3 Antenna Requirements .................................................................................................................... 20 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 21 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 22 APPENDIX A. TEST RESULT OF CONDUCTED SPURIOUS EMISSION APPENDIX B. TEST RESULT OF RADIATED SPURIOUS EMISSION APPENDIX C. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL INC. Page Number : 2 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE This is a variant report by adding 6 new antennas. All the test cases were performed on original report which can be referred to Sporton Report Number FR4O2349A Rev. 01 Sep. 04, 2015 FR3N2752-01ATX. Based on the original report, only the peak output power and conducted spurious emission and cabinet radiation were performed. SPORTON INTERNATIONAL INC. Page Number : 3 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A SUMMARY OF TEST RESULT Report FCC Rule Description Limit Result Remark Section 3.1 15.247(b)(1) Peak Output Power ≤ 125 mW Pass - Radiated Band Edges Under limit 3.2 15.247(d) and Radiated Spurious 15.209(a) & 15.247(d) Pass 9.23 dB at Emission 216.840 MHz 15.203 & 3.3 Antenna Requirement N/A Pass - 15.247(b) SPORTON INTERNATIONAL INC. Page Number : 4 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 1 General Description 1.1 Applicant Texas Instruments Incorporated 12500 TI Boulevard, M/S 8751, Dallas, TX 75243, USA 1.2 Manufacturer Jorjin Technologies Inc 17F, No.239, Sec. 1, Datong Rd., Xizhi Dist., New Taipei City 221, Taiwan 1.3 Product Feature of Equipment Under Test Product Feature Equipment WiFi and Bluetooth Module Brand Name Texas Instruments Model Name WL18MODGB FCC ID Z64-WL18SBMOD WLAN 11b/g/n HT20/HT40 EUT supports Radios application Bluetooth v4.0 EDR/LE EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. SPORTON INTERNATIONAL INC. Page Number : 5 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

seomovc«s. FCC RF Test Report Report No. : FR4O2349A 1.4 Product Specification subjective to this standard Product Specification subjective to this standard Tx/Rx Frequency Range 2402 MHz ~ 2480 MHz Number of Channels 79 Carrier Frequency of Each Channel 2402+n*1 MHz; n=0~78 Bluetooth BR(1Mbps) : 11.90 dBm (0.0155 W) Maximum Output Power to Antenna Bluetooth EDR (2Mbps) : 9.78 dBm (0.0095 W) Bluetooth EDR (3Mbps) : 9.85 dBm (0.0097 W) Bluetooth BR (1Mbps) : GFSK Type of Modulation Bluetooth EDR (2Mbps) : z A—DQPSK Bluetooth EDR (3Mbps) : 8—DPSK Antenna Information Antenna Type Brand 24GHz~2.5GHz PCB Ethertronics —0.6 Dipole LSR 2 PCB Laird 2 Chip Pulse 3.2 PIFA LSR 2 Chip TDK 2.4 1.5 Modification of EUT No modifications are made to the EUT during all test items. SPORTON INTERNATIONAL INC. Page Number : 6 of 22 TEL : 886—3—327—3456 Report Issued Date : Sep. 04, 2015 FAX : 886—3—328—4978 Report Version : Rev. 01 FCC ID : Z64—WL18SBMOD Report Template No.: BUS—FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 1.6 Testing Location Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code : 1190) and the FCC designation No. TW1022 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC Test. Test Site SPORTON INTERNATIONAL INC. st No. 52, Hwa Ya 1 Rd., Hwa Ya Technology Park, Kwei-Shan District, Tao Yuan City, Taiwan, R.O.C. Test Site Location TEL: +886-3-327-3456 FAX: +886-3-328-4978 Sporton Site No. Test Site No. TH05-HY Test Site SPORTON INTERNATIONAL INC. No. 58 , Aly. 75, Ln. 564, Wenhua 3rd Rd., Test Site Location Kwei-Shan District, Tao Yuan City, Taiwan, R.O.C. TEL: +886-3-327-0855 Sporton Site No. Test Site No. 03CH10 Note: The test site complies with ANSI C63.4 2009 requirement. 1.7 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  FCC Part 15 Subpart C §15.247  ANSI C63.10-2009 Remark: 1. All test items were verified and recorded according to the standards and without any deviation during the test. 2. FCC permits the use of the 1.5 meter table as an alternative in C63.10-2013 through inquiry tracking number 961829. 3. This EUT has also been tested and complied with the requirements of FCC Part 15, Subpart B, recorded in a separate test report. SPORTON INTERNATIONAL INC. Page Number : 7 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

seomovc«s. FCC RF Test Report Report No. : FR4O2349A 2 Test Configuration of Equipment Under Test 2.1 Descriptions of Test Mode Preliminary tests were performed in different data rates and recorded the RF output power in the following table: Bluetooth RF Output Power Data Rate / Modulation Channel Frequency GFSK x /A—DQPSK 8—DPSK 1Mbps 2Mbps 3Mbps ChO0 2402MHz - dBm 9.78 dBm 9.85 dBm Ch39 2441MHz 11.37 dBm 9.39 dBm 9.58 dBm Ch78 2480MHz 11.50 dBm 9.31 dBm 9.34 dBm Remark: 1. All the test data for each data rate were verified, but only the worst case was reported. 2. The data rate was set in 1Mbps for all the test items due to the highest RF output power. The EUT has been associated with peripherals and configuration operated in a manner tended to maximize its emission characteristics in a typical application. Frequency range investigated: radiation (9 kHz to the 10th harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower). SPORTON INTERNATIONAL INC. Page Number : 8 of 22 TEL : 886—3—327—3456 Report Issued Date : Sep. 04, 2015 FAX : 886—3—328—4978 Report Version : Rev. 01 FCC ID : Z64—WL18SBMOD Report Template No.: BUS—FR15CBT Version 1.0

seomovc«s. FCC RF Test Report Report No. : FR402349A 2.2 Test Mode The following summary table is showing all test modes to demonstrate in compliance with the standard. Summary table of Test Cases Data Rate / Modulation Test Item Bluetooth BR 1Mbps Bluetooth EDR 2Mbps Bluetooth EDR 3Mbps GFSK x /A—DQPSK 8—DPSK Mode 1: CHOO_2402 MHz Mode 4: CHOO_2402 MHz Mode 7: CHOO_2402 MHz Conducted Mode 2: CH39_2441 MHz Mode 5: CH39_2441 MHz Mode 8: CH39_2441 MHz Test Cases Mode 3: CH78_2480 MHz Mode 6: CH78_2480 MHz Mode 9: CH78_2480 MHz Bluetooth BR 1Mbps GFSK Radiated Mode 1: CHOO_2402 MHz Test Cases Mode 2: CH39_2441 MHz Mode 3: CH78_2480 MHz Remark: For radiated test cases, the worst mode data rate 1Mbps was reported only, because this data rate has the highest RF output power at preliminary tests, and the conducted spurious emissions and conducted band edge measurement for each data rate are no worse than 1Mbps, and no other significantly frequencies found in conducted spurious emission. SPORTON INTERNATIONAL INC. Page Number : 9 of 22 TEL : 886—3—327—3456 Report Issued Date : Sep. 04, 2015 FAX : 886—3—328—4978 Report Version : Rev. 01 FCC ID : Z64—WL18SBMOD Report Template No.: BUS—FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 2.3 Connection Diagram of Test System <Bluetooth Tx Mode> Adapter 120 Vac / 60 Hz Notebook EUT Evaluation board Fixture EUT 2.4 Support Unit used in test configuration and system Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord FCC DoC/ AC I/P: E335 (with Unshielded, 1.2 m 1. Notebook Lenovo WiFi module Contains FCC N/A DC O/P: TP00034A) ID:QDS-BRCM1058 Shielded, 1.8 m 2.5 EUT Operation Test Setup For Bluetooth function, programmed RF utility, “HCI Tester” installed in the notebook make the EUT provide functions like channel selection and power level for continuous transmitting and receiving signals. SPORTON INTERNATIONAL INC. Page Number : 10 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 2.6 Measurement Results Explanation Example For all conducted test items: The offset level is set in the spectrum analyzer to compensate the RF cable loss and attenuator factor between EUT conducted output port and spectrum analyzer. With the offset compensation, the spectrum analyzer reading level is exactly the EUT RF output level. Example: The spectrum analyzer offset is derived from RF cable loss and attenuator factor. Offset = RF cable loss + attenuator factor. Following shows an offset computation example with cable loss 4.2 dB and 10dB attenuator. Offset(dB) = RF cable loss(dB) + attenuator factor(dB). = 4.2 + 10 = 14.2 (dB) SPORTON INTERNATIONAL INC. Page Number : 11 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 3 Test Result 3.1 Peak Output Power Measurement 3.1.1 Limit of Peak Output Power Section 15.247 (b) The maximum peak conducted output power of the intentional radiator shall not exceed the following: (1) For frequency hopping systems operating in the 2400-2483.5 MHz band employing at least 75 non-overlapping hopping channels, and all frequency hopping systems in the 5725-5850 MHz band: 1 watt. For all other frequency hopping systems in the 2400-2483.5 MHz band 0.125 watts. The power limit for 1Mbps is 1watt, and for 2Mbps, 3Mbps and AFH are 0.125 watts. 3.1.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.1.3 Test Procedures 1. The testing follows FCC Public Notice DA 00-705 Measurement Guidelines. 2. The RF output of EUT was connected to the power meter by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Measure the conducted output power with cable loss and record the results in the test report. 5. Measure and record the results in the test report. 3.1.4 Test Setup SPORTON INTERNATIONAL INC. Page Number : 12 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

seomovc«s. FCC RF Test Report Report No. : FR402349A 3.1.5 Test Result of Peak Output Power Test Mode : 1Mbps Temperature : 24 — 26°C Test Engineer : |Bill Kuo Relative Humidity : 148 —51% RF Power (dBm) Frequency Channel GFSK Max. Limits (MHz) Pass/Fail 1 Mbps (dBm) 00 2402 11.90 20.97 Pass 39 2441 11.37 20.97 Pass 78 2480 11.50 20.97 Pass Note: For AFH mode using 20 hopping channels, the maximum output power limit is 20.97dBm. Test Mode : 2Mbps Temperature : 24 — 26°C Test Engineer : |Bill Kuo Relative Humidity : 148 —51% RF Power (dBm) Frequency Channel x /A—DQPSK Max. Limits (MHz) Pass/Fail 2 Mbps (dBm) 00 2402 9.78 20.97 Pass 39 2441 9.39 20.97 Pass 78 2480 9.31 20.97 Pass Test Mode : 3Mbps Temperature : 24 — 26°C Test Engineer : |Bill Kuo Relative Humidity : 148 —51% RF Power (dBm) Frequency Channel 8—DPSK Max. Limits (MHz) Pass/Fail 3 Mbps (dBm) 00 2402 9.85 20.97 Pass 39 2441 9.58 20.97 Pass 78 2480 9.34 20.97 Pass SPORTON INTERNATIONAL INC. Page Number : 13 of 22 TEL : 886—3—327—3456 Report Issued Date : Sep. 04, 2015 FAX : 886—3—328—4978 Report Version : Rev. 01 FCC ID : Z64—WL18SBMOD Report Template No.: BUS—FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 3.2 Radiated Band Edges and Spurious Emission Measurement 3.2.1 Limit of Radiated Band Edges and Spurious Emission In any 100 kHz bandwidth outside the intentional radiator frequency band, all harmonics/spurious must be at least 20 dB below the highest emission level within the authorized band. In addition, radiated emissions which fall in the restricted bands must also comply with the FCC section 15.209 limits as below. Frequency Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 – 0.490 2400/F(kHz) 300 0.490 – 1.705 24000/F(kHz) 30 1.705 – 30.0 30 30 30 – 88 100 3 88 – 216 150 3 216 - 960 200 3 Above 960 500 3 3.2.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. SPORTON INTERNATIONAL INC. Page Number : 14 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 3.2.3 Test Procedures 1. The EUT was placed on a turntable with 0.8 meter for frequency below 1GHz and 1.5 meter for frequency above 1GHz respectively above ground. 2. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. 3. For each suspected emission, the EUT was arranged to its worst case and then tune the Antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high pass filter are used for the test in order to get better signal level to comply with the guidelines. 4. Set to the maximum power setting and enable the EUT transmit continuously. 5. Use the following spectrum analyzer settings: (1) Span shall wide enough to fully capture the emission being measured; (2) Set RBW=100 kHz for f < 1 GHz, RBW=1MHz for f>1GHz ; VBW  RBW; Sweep = auto; Detector function = peak; Trace = max hold for peak (3) For average measurement: use duty cycle correction factor method per 15.35(c). Duty cycle = On time/100 milliseconds On time = N1*L1+N2*L2+...+Nn-1*LNn-1+Nn*Ln Where N1 is number of type 1 pulses, L1 is length of type 1 pulses, etc. Average Emission Level = Peak Emission Level + 20*log(Duty cycle) 6. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level Note: The average levels were calculated from the peak level corrected with duty cycle correction factor (24.73dB) derived from 20log (dwell time/100ms). This correction is only for signals that hop with the fundamental signal, such as band-edge and harmonic. Other spurious signals that are independent of the hopping signal would not use this correction. SPORTON INTERNATIONAL INC. Page Number : 15 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 3.2.4 Test Setup For Conducted Measurement Setup: For radiated emissions below 30MHz For radiated emissions from 30MHz to 1GHz SPORTON INTERNATIONAL INC. Page Number : 16 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A For radiated emissions above 1GHz 3.2.5 Test Results of Radiated Spurious Emissions (9 kHz ~ 30 MHz) The low frequency, which started from 9 kHz to 30MHz, was pre-scanned and the result which was 20dB lower than the limit line per 15.31(o) was not reported. SPORTON INTERNATIONAL INC. Page Number : 17 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 3.2.6 Duty cycle correction factor for average measurement DH5 on time (One Pulse) Plot on Channel 39 DH5 on time (Count Pulses) Plot on Channel 39 Note: 1. Worst case Duty cycle = on time/100 milliseconds = 2 * 2.90 / 100 = 5.80 % 2. Worst case Duty cycle correction factor = 20*log(Duty cycle) = -24.73 dB 3. DH5 has the highest duty cycle worst case and is reported. SPORTON INTERNATIONAL INC. Page Number : 18 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A Duty Cycle Correction Factor Consideration for AFH mode: Bluetooth normal hopping rate is 1600Hz and reduced to 800Hz in AFH mode; due to the reduced number of hopping frequencies, with the same packet configuration the dwell time in each channel frequency within 100msec period is longer in AFH mode than normal mode. In AFH mode, the minimum hopping frequencies are 20, to get the longest dwell time DH5 packet is observed; the period to have DH5 packet completing one hopping sequence is 2.90 ms x 20 channels = 58.0 ms There cannot be 2 complete hopping sequences within 100ms period, considering the random hopping behavior, maximum 2 hops can be possibly observed within the period. [100ms / 57.6ms ] = 2 hops Thus, the maximum possible ON time: 2.90 ms x 2 = 5.80 ms Worst case Duty Cycle Correction factor, which is derived from the maximum possible ON time, 20 x log(5.80 ms/100ms) = -24.73 dB 3.2.7 Test Result of Conducted Spurious at Band Edges in the Restricted Band Please refer to Appendix A. 3.2.8 Test Result of Conducted Spurious Emission in the Restricted Band Please refer to Appendix A. 3.2.9 Test Result of Cabinet Radiated Spurious at Band Edges Please refer to Appendix B. 3.2.10 Test Result of Cabinet Radiated Spurious Emission (30MHz ~ 10th Harmonic) Please refer to Appendix B. SPORTON INTERNATIONAL INC. Page Number : 19 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 3.3 Antenna Requirements 3.3.1 Standard Applicable If directional gain of transmitting antennas is greater than 6dBi, the power shall be reduced by the same level in dB comparing to gain minus 6dBi. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the FCC rule. 3.3.2 Antenna Anti-Replacement Construction Non-standard antenna connector is used. 3.3.3 Antenna Gain The antenna peak gain of EUT is less than 6 dBi. Therefore, it is not necessary to reduce maximum peak output power limit. SPORTON INTERNATIONAL INC. Page Number : 20 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 4 List of Measuring Equipment Calibration Instrument Manufacturer Model No. Serial No. Characteristics Test Date Due Date Remark Date GB412923 300MHz~40GH Aug.12, 2015~ Conducted Power Meter Agilent E4416A Jan. 14, 2015 Jan. 13, 2016 44 z Aug.13, 2015 (TH05-HY) US404415 300MHz~40GH Aug.12,2015~ Conducted Power Sensor Agilent E9327A Jan. 14, 2015 Jan. 13, 2016 48 z Aug.13,2015 (TH05-HY) Spectrum Rohde & Aug.12, 2015~ Conducted FSP40 100055 9kHz-40GHz Jun. 18, 2015 Jun. 17, 2016 Analyzer Schwarz Aug.13, 2015 (TH05-HY) BT Base Rohde & Aug.12, 2015~ Conducted CBT 101136 BT 3.0 & 4.0 Sep. 24, 2014 Sep. 23, 2015 Station(Measure) Schwarz Aug.13, 2015 (TH05-HY) SCHWARZBE BBHA9170 Aug. 13, 2015~ Radiation Horn Antenna BBHA 9170 18GHz- 40GHz Nov. 03, 2014 Nov. 02, 2015 CK 584 Aug. 14, 2015 (03CH10-HY) Aug. 13, 2015~ Radiation Loop Antenna TESEQ HLA 6120 31244 9kHZ~30MHz Feb. 02, 2015 Feb. 01, 2016 Aug. 14, 2015 (03CH10-HY) Aug. 13, 2015~ Radiation Amplifier SONOMA 310N 187311 9kHz~1GHz Nov. 24, 2014 Nov. 23, 2015 Aug. 14, 2015 (03CH10-HY) Aug. 13, 2015~ Radiation Bilog Antenna TESEQ CBL 6111D 35413 30MHz~1GHz Oct. 24, 2014 Oct. 23, 2015 Aug. 14, 2015 (03CH10-HY) MY541300 Aug. 13, 2015~ Radiation EMI Test Receiver Keysight N9038A 20Hz ~ 8.4GHz Nov. 05, 2014 Nov. 04, 2015 85 Aug. 14, 2015 (03CH10-HY) SCHWARZBE 9120D-132 Aug. 13, 2015~ Radiation Horn Antenna BBHA 9120 D 1GHz ~ 18GHz Oct. 03, 2014 Oct. 02, 2015 CK 5 Aug. 14, 2015 (03CH10-HY) MY532700 Aug. 13, 2015~ Radiation Preamplifier Keysight 83017A 1GHz~26.5GHz Nov. 20, 2014 Nov. 19, 2015 78 Aug. 14, 2015 (03CH10-HY) Spectrum MY542004 Aug. 13, 2015~ Radiation Keysight N9010A 10Hz ~ 44GHZ Oct. 14, 2014 Oct. 13, 2015 Analyzer 85 Aug. 14, 2015 (03CH10-HY) Control Turn Aug. 13, 2015~ Radiation Controller EMEC EM 1000 N/A N/A N/A table & Ant Mast Aug. 14, 2015 (03CH10-HY) AM-BS-4500- Aug. 13, 2015~ Radiation Antenna Mast EMEC N/A 1~4m N/A N/A B Aug. 14, 2015 (03CH10-HY) Aug. 13, 2015~ Radiation Turn Table EMEC TT 2200 N/A 0-360 degree N/A N/A Aug. 14, 2015 (03CH10-HY) JS44-180040 Aug. 13, 2015~ Radiation Preamplifier MITEQ 1840917 18GHz ~ 40GHz Jun. 02, 2015 Jun. 01, 2016 00-33-8P Aug. 14, 2015 (03CH10-HY) SPORTON INTERNATIONAL INC. Page Number : 21 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

FCC RF Test Report Report No. : FR4O2349A 5 Uncertainty of Evaluation Uncertainty of Conducted Emission Measurement (150 kHz ~ 30 MHz) Measuring Uncertainty for a Level of 2.26 Confidence of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of 4.90 Confidence of 95% (U = 2Uc(y)) SPORTON INTERNATIONAL INC. Page Number : 22 of 22 TEL : 886-3-327-3456 Report Issued Date : Sep. 04, 2015 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL18SBMOD Report Template No.: BU5-FR15CBT Version 1.0

seonton cas.


Document Created: 2019-09-26 03:41:15
Document Modified: 2019-09-26 03:41:15
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC