User Manual

FCC ID: YZZGWN7630

Users Manual

Download: PDF
FCCID_4302894

GRANDSTREAM C O N N E C TIN G TH E W O R L D Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 — 9300 Fax: +1 (617) 249 — 1987 GRANDSTREAM www.grandstream.com AT BEJCY|CZ|DK EE| FI FR OE EL HUJ IE IT L¥ / LT SI LU MT NL PL PT SK ES| SE |UK |BG RO HR GWN7630 In all EU member states, operation of 5150 — 5350 MHz is restricted to indoor use only. Enterprise 802.11ac Wave—2 4x4 :4 Wi—Fi Access Point For Warranty and RMA information, please visit www.grandstream.com Quick Installation Guide

EN OVERVIEW The GWN7630 is a high-performance 802.11ac wireless access point for small to medium sized businesses, multiple floor offices, commercial 3x M3 NUT 1 x Quick Installation Guide loca-tions and branch offices. It offers dual-band 4x4:4 MU-MIMO 1 x GPL Statement technology(beamforming is not supported) and a sophisticated antenna GWN7630 PORTS design for maximum network throughput and expanded Wi-Fi coverage range. To ensure easy installation and management, GWN7630 uses a controllerless distributed network management design where the controller is embedded within the product’s web user interface. For the sake of large-scale deployment, GWN7630 supports to be managed by GWN Cloud system. With support for fast roaming, advanced QoS, low-latency real-time applications, 200+ client devices per AP and dual Gigabit network ports with PoE/PoE+, combin-ing with the features of Mesh, Captive Portal and seamless connection with Grandstream WP8XX series Wi-Fi phone, the GWN7630 is an ideal wireless access point for large and small Port Description wireless network deployments. PRECAUTIONS NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting PoE/PoE+. • Do not attempt to open, disassemble, or modify the device. • Do not expose this device to temperatures outside range of -10 °C to NET Ethernet RJ45 port (10/100/1000Mbps) 60 °C for storage and 0 °C to 40 °C for operating. to your router or another GWN76xx. • Do not expose the device to environments outside of the following RESET Factory reset button. humidity range: 10-90% RH (non-condensing). Press for 7 seconds to reset factory de- • Do not use the device in outdoor environment. fault settings. • Do not power cycle your device during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to POWERING AND CONNECTING THE GWN7630 malfunction. GWN7630 can be powered on using PoE/PoE+ switch using following PACKAGE CONTENTS steps: Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7630. Step 2: Plug the other end into the uplink port of the power over Ethernet 1x GWN7630 1x Mounting 1x Ceiling (PoE/PoE+) switch. Access Point Bracket Mounting Bracket Network Port RJ45 Ethernet Cable to power over Ethernet (PoE/PoE+) Switch 3x Screw 3x Screw 3x Plastic Expansion (PM 3 x 50) (PA 3.5 x 20) Bolt ~1~ ~2~

HARDWARE INSTALLATION GWN7630 can be mounted on the wall or ceiling, Please refer to the following steps for the appropriate installation. Wall Mount 1. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7630. 4 2. Align the arrow on the GWN7630AP with the arrow on the locking 5 6 tab of the mounting bracket and ensure that your GWN is firmly seated on the mounting bracket. Ceiling Mount 3. Turn the GWN clockwise until it locks into place and fits the locking tab. Note: Ceiling mounting is recommended for optimal coverage perfor- mance. Wall Wall 1. Remove the ceiling tile. 2. Place the ceiling backing plate in the center of the ceiling tile and mark the mounting screw holes (screw holes DIA 5.5mm, reticle hole DIA 25mm). 3. Insert the screws through the mounting bracket. PA3.5 x 20 PA3.5x20 Screw Screw 1 Plastic Expan- Plastic Expansion 3 Bolt Ceiling sion Bolt M3 nut 2 Mounting 3 1 4. Connect the power cable and the ethernet cable (RJ45) to the cor- rect ports of your GWN7630. 5. Align the arrow on the GWN7630AP with the arrow on the locking tab of the mounting bracket and ensure that your GWN is firmly 2 seated on the mounting bracket. 6. Turn the GWN clockwise until it locks into place and fits the locking M3.0x50 screw tab. ~3~ ~4~

4. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7630. 5. Align the arrow on the GWN7630AP with the arrow on the locking GWN7630 48V 0.5A GigE POE tab of the mounting bracket and ensure that your GWN is firmly seated on the mounting bracket and connect the network and power ,and cables. 6. Turn the GWN clockwise until it locks into place and fits the locking tab. 630 WiFi Made in China ACCESSING THE CONFIGURATION INTERFACE 4 A computer connected to the GWN7630’s SSID, or to the same network 6 as the GWN7630 can discover and access its configuration interface us- ing one of the below methods: Method 1: Discover GWN7630 using its MAC Address 5 1. Locate the MAC address on the MAC tag of the unit, which is on the CONNECT TO GWN7630 DEFAULT Wi-Fi NETWORK underside of the device, or on the package. 2. From a computer connected to same network as the GWN7630, type GWN7630 can be used as standalone access point out of box, or after in following address using GWN7630’s MAC address on your browser factory reset with Wi-Fi enabled by default. https://gwn_<mac>.local After powering the GWN7630 and connecting it to the network, GWN7630 Example: If a GWN7630 has the MAC address 00:0B:82:8C:4D:F8, this will broadcast a default SSID based on its MAC address GWN[MAC’s unit can be accessed by typing https://gwn_000b828c4df8.local on the last 6 digits] and a random password. browser. Note: GWN7630’s default SSID and password information are printed Method 2: Discover GWN7630 using GWN Discovery Tool on the MAC tag of the unit. 1. Download and install GWN Discovery Tool from the following link: http://www.grandstream.com/tools/GWNDiscoveryTool.zip 2. Open the GWN DiscoveryTool, and click on Scan. ~5~ ~6~

3. The tool will discover all GWN76XX Access Points connected on the network showing their MAC and IP addresses. FCC Caution: 4. Click on Manage Device to be redirected directly to the GWN7630’s configuration interface, or type in manually the displayed IP address on your browser. Enter username and password to login. (The default administrator user- name is “admin” and the default random password can be found at the sticker on the GWN7630). Notes: ● Make sure that the GWN7630 is not already paired with another GWN76xx Access Point as slave, GWN7000 Router Series or GWN. Cloud, otherwise the configuration interface cannot be accessed ● If the GWN7630 is already paired, make sure to unpair it first, or do a factory reset. ● It is customer’s responsibility to ensure compliance with local regula- tions for frequency bands, transmit power and others. ● To manage GWN7630 over cloud, please refer to https://www.gwn. cloud. Refer to online documents and FAQ for more detailed information: http://www.grandstream.com/our-products ~7~ ~8~


Document Created: 2019-06-01 12:27:06
Document Modified: 2019-06-01 12:27:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC