Appendix_B

FCC ID: YHLBLUC5PLUS

RF Exposure Info

Download: PDF
FCCID_4432801

Test Laboratory: UnionTrust Date: 2019/815 PO1_GSMS850_GPRS 11_Left Cheek_128 DUT: EUT Communication System: GPRS 850—3solt; Frequency: 824.2 MHz;Duty Cycle: 1:2.67 Medium: H835 Medium parameters used (interpolated): £=824.2 MHz; 0 =0.912 mho/m; 8.=42.7; p = 1000 kg/m} DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(6.12, 6.12, 6.12); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 $n662; Calibrated: 2019/4/11 — Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (61x71x1): Measurement grid: dx=1 5mm, dy=1 5mm Maximum value of SAR (interpolated)= 0.084 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, daz=5mm Reference Value=4.17 V/m; Power Drift=0.02 dB Peak SAR (extrapolated) = 0.120 W/kg SAR(1 g) = 0.089 mW/g; SAR(10 g) = 0.060 mW/g Maximum value of SAR (measured) =0.108 mW/g mWig 0.084 0.067 0.050 0.034 0.017 0.000

Test Laboratory: UnionTrust Date: 2019/8/15 PO2_GSM1900_GPRS 11_Right Cheek_512 DUT: EUT Communication System: GPRS1900—3slots; Frequency: 1850.2 MHz;Duty Cycle: 1:2.67 Medium: H1900 Medium parameters used (interpolated): £= 1850.2 MHz; 0 = 1.35 mho/m; 8. <41.6; p = 1000 kg/m® DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(5.06, 5.06, 5.06); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (61x71x1): Measurement grid: dx=1 5mm, dy=1 Smm Maximum value of SAR (interpolated) = 0.094 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value= 3.98 V/m; Power Drift=0.01 dB Peak SAR (extrapolated)= 0.120 W/kg SAR(1 g) = 0.075 mW/g; SAR(10 g) = 0.047 mW/g Maximum value of SAR (measured) = 0.088 mW/g mWiq 0.094 0.075 0.057 0.038 0.020 0.001

Test Laboratory: UnionTrust Date: 2019/8/15 PO3_WCDMA II_RMC12.2K_Right Cheek_9538 DUT: EUT Communication System: WCDMA BandII; Frequency: 1907.6 MHz;Duty Cycle: 1:1 Medium: H1900 Medium parameters used: £=1908 MHz; 0 = 1.42 mho/m; 8.= 41.3; p=1000 kg/m> DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(5.06, 5.06, 5.06); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (61x71x1): Measurement grid: dx=1 5mm, dy=1 Smm Maximum value of SAR (interpolated) = 0.208 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value=7.77 V/m; Power Drift=—0.054 dB Peak SAR (extrapolated)= 0.284 W/kg SAR(1 g) = 0.167 mW/g; SAR(10 g) = 0.094 mW/g Maximum value of SAR (measured) =0.210 mW/g mWiq 0.208 0.166 0.125 0.083 0.042 0.000

Test Laboratory: UnionTrust Date: 2019/8/15 PO4_WCDMA V_RMC12.2K_Left Cheek_4132 DUT: EUT Communication System: WCDMA Band V; Frequency: 826.4 MHz;Duty Cycle: 1:1 Medium: H835 Medium parameters used (interpolated): £=826.4 MHz; 0 =0.914 mho/m; 8. = 42.7; p = 1000 kg/m® DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(6.12, 6.12, 6.12); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (61x71x1): Measurement grid: dx=1 5mm, dy=1 Smm Maximum value of SAR (interpolated) = 0.041 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value= 4.69 V/m; Power Drift=0.080 dB Peak SAR (extrapolated)= 0.040 W/kg SAR(1 g) = 0.033 mW/g; SAR(10 g) = 0.024 mW/g Maximum value of SAR (measured) =0.036 mW/g mWiq 0.0471 0.033 0.025 0.016 0.008 0.000

Test Laboratory: UnionTrust Date: 2019/8/16 PO5_802.11b_Right Cheek_1 DUT: EUT Communication System: Wlan 802.11b; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: £=2412 MHz; 0 = 1.72 mho/m; 8.= 40.3; p = 1000 kg/m> DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(4.57, 4.57, 4.57); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (61x71x1): Measurement grid: dx=1 2mm, dy=12mm Maximum value of SAR (interpolated) = 0.194 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value=7.46 V/m; Power Drift=0.006 dB Peak SAR (extrapolated)= 0.358 W/kg SAR(1 g) = 0.168 mW/g; SAR(10 g) = 0.088 mW/g Maximum value of SAR (measured) = 0.226 mW/g mWig 0.194 0.155 0.116 0.078 0.039 0.000

Test Laboratory: UnionTrust Date: 2019/8/15 PO6_GSM850 _GPRS11_Rear Face_10mm_128 DUT: EUT Communication System: GPRS 850—3solt; Frequency: 824.2 MHz;Duty Cycle: 1:2.67 Medium: B835 Medium parameters used (interpolated): {= 824.2 MHz; 0 =0.981 mho/m; 8. = 55.9; p = 1000 kg/m® DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(6.18, 6.18, 6.18); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (71x61x1): Measurement grid: dx=1 5mm, dy=1 Smm Maximum value of SAR (interpolated) = 0.199 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value=13.6 V/m; Power Drift=—0.101 dB Peak SAR (extrapolated)= 0.232 W/kg SAR(1 g) = 0.169 mW/g; SAR(10 g) = 0.118 mW/g Maximum value of SAR (measured) = 0.188 mW/g mWiq p.199 o162 0126 \ 0.089 0.053 0.016

Test Laboratory: UnionTrust Date: 2019/8/15 PO7_GSM1900 _GPRS11_Rear Face_10mm_512 DUT: EUT Communication System: GPRS1900—3slots; Frequency: 1850.2 MHz;Duty Cycle: 1:2.67 Medium: B1900 Medium parameters used (interpolated): {= 1850.2 MHz; 0 = 1.49 mho/m; 8. =52.7; p = 1000 kg/m® DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(4.79, 4.79, 4.79); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (71x61x1): Measurement grid: dx=1 5mm, dy=1 Smm Maximum value of SAR (interpolated) = 0.317 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value= 4.63 V/m; Power Drift=0.068 dB Peak SAR (extrapolated)= 0.417 W/kg SAR(1 g) = 0.257 mW/g; SAR(10 g) = 0.143 mW/g Maximum value of SAR (measured) =0.313 mW/g mWiq 0.317 0.255 0.193 0.131 0.069 0.007

Test Laboratory: UnionTrust Date: 2019/8/15 PO8_WCDMA II _RMC12.2K_Rear Face_10mm_9538 DUT: EUT Communication System: WCDMA Band IV; Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: B1750 Medium parameters used: £= 1733 MHz; 0 = 1.46 mho/m; &.= 52.4; p= 1000 kg/m> DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(4.95, 4.95, 4.95); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (61x61x1): Measurement grid: dx=1 5mm, dy=1 Smm Maximum value of SAR (interpolated) = 0.719 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value= 12.2 V/m; Power Drift=—0.07 dB Peak SAR (extrapolated)= 0.948 W/kg SAR(1 g) = 0.590 mW/g; SAR(10 g) = 0.328 mW/g Maximum value of SAR (measured) = 0.700 mW/g mWilg 0.719 0.577 0.435 0.292 0.150 0.008

Test Laboratory: UnionTrust Date: 2019/8/15 PO9_WCDMA V _RMC12.2K_Right Side_10mm_4132 DUT: EUT Communication System: WCDMA Band V; Frequency: 826.4 MHz;Duty Cycle: 1:1 Medium: B835 Medium parameters used (interpolated): {= 826.4 MHz; 0 = 0.983 mho/m; 8. = 55.9; p = 1000 kg/m® DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(6.18, 6.18, 6.18); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (81x61x1): Measurement grid: dx=1 5mm, dy=1 5mm Maximum value of SAR (interpolated) = 0.051 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value= 6.08 V/m; Power Drift=—0.119 dB Peak SAR (extrapolated)= 0.054 W/kg SAR(1 g) = 0.042 mW/g; SAR(10 g) = 0.029 mW/g Maximum value of SAR (measured) = 0.048 mW/g mWiq 0.051 0.041 0.031 0.021 0.011 0.001

Test Laboratory: UnionTrust Date: 2019/8/16 P10_802.11b_Rear Face_l10mm_1 DUT: EUT Communication System: Wlan 802.11b; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: B2450 Medium parameters used: £=2412 MHz; 0 = 1.96 mho/m; &.= 53.1; p=1000 kg/m> DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(4.47, 4.47, 4.47); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (71x61x1): Measurement grid: dx=1 2mm, dy=12mm Maximum value of SAR (interpolated)= 0.151 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value= 3.29 V/m; Power Drift=—0.165 dB Peak SAR (extrapolated)= 0.199 W/kg SAR(1 g) = 0.123 mW/g; SAR(10 g) = 0.074 mW/g Maximum value of SAR (measured) = 0.145 mW/g mWilq 0.145 0.116 0.088 0.059 0.031 0.002

Test Laboratory: UnionTrust Date: 2019/8/15 P11_WCDMA V _RMC12.2K_Front Face_10mm_4132 DUT: EUT Communication System: WCDMA Band V; Frequency: 826.4 MHz;Duty Cycle: 1:1 Medium: B835 Medium parameters used (interpolated): {= 826.4 MHz; 0 = 0.983 mho/m; 8. = 55.9; p = 1000 kg/m® DASY4 Configuration: — Probe: ES3DV3 — SN3090; ConvF(6.18, 6.18, 6.18); Calibrated: 2019/4/12 — Sensor—Surface: 3mm (Mechanical Surface Detection) — Electronics: DAE4 Sn662; Calibrated: 2019/4/11 — Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 — ; Postprocessing SW: SEMCAD, V1.8 Build 186 Test/Area Scan (81x61x1): Measurement grid: dx=1 5mm, dy=1 5mm Maximum value of SAR (interpolated) = 0.043 mW/g Test/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value= 6.52 V/m; Power Drift=—0.106 dB Peak SAR (extrapolated)= 0.044 W/kg SAR(1 g) = 0.038 mW/g; SAR(10 g) = 0.029 mW/g Maximum value of SAR (measured) =0.041 mW/g mWiq 0.043 0.035 0.028 & 0.020 y 0.013 0.005


Document Created: 2019-09-07 13:44:07
Document Modified: 2019-09-07 13:44:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC