YE3600-SC600TA

FCC ID

Equipment: LTE Module

DT Research, Inc. 600-SC600TA

3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT, NEW TAIPEI, N/A N/A Taiwan

Application
Frequency Range
Final Action Date
Granted
Z8IWI6rL6BQ5Yr5EaN0g+A==
2505.0-2565.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
2506.0-2680.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
2510.0-2560.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
668.0-693.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
673.0-688.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
704.0-711.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
709.0-711.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
779.5-784.5
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
782.0-782.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
790.5-795.5
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
793.0-793.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
819.0-819.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
826.4-846.6
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
829.0-844.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
831.5-841.5
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
1712.4-1752.6
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
1715.0-1750.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
1715.0-1775.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
1717.5-1772.5
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
1720.0-1745.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
1720.0-1770.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
1852.4-1907.6
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
1857.5-1902.5
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
1860.0-1900.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
1860.0-1905.0
2020-05-18
APPROVED
Z8IWI6rL6BQ5Yr5EaN0g+A==
2498.5-2687.5
2020-05-18
APPROVED
MbDMSxNwh0ETIYG6Kgit6g==
5180.0-5240.0
2020-05-18
APPROVED
MbDMSxNwh0ETIYG6Kgit6g==
5260.0-5320.0
2020-05-18
APPROVED
MbDMSxNwh0ETIYG6Kgit6g==
5500.0-5700.0
2020-05-18
APPROVED
MbDMSxNwh0ETIYG6Kgit6g==
5745.0-5825.0
2020-05-18
APPROVED
/qvavVqzAXN5qoorgpcmLA==
2402.0-2480.0
2020-05-18
APPROVED
LE5yzyL3jdl1+6FFOG5roQ==
2402.0-2480.0
2020-05-18
APPROVED
LE5yzyL3jdl1+6FFOG5roQ==
2412.0-2462.0
2020-05-18
APPROVED
File NameDocument TypeDateDirect
External PhotoExternal Photos 2020-05-18 00:00:00 pdf
Applicant declaration letterCover Letter(s) 2020-05-18 00:00:00 pdf
LabelID Label/Location Info 2020-05-18 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2020-05-18 00:00:00 pdf
POACover Letter(s) 2020-05-18 00:00:00 pdf
Declaration by new applicantCover Letter(s) 2020-05-18 00:00:00 pdf
POA from original grantCover Letter(s) 2020-05-18 00:00:00 pdf
Applicant_Declaration_LetterCover Letter(s) 2020-05-18 00:00:00 pdf

Application Details:

EquipmentLTE Module
FRN0019830793
Grantee CodeYE3
Product Code600-SC600TA
Applicant BusinessDT Research, Inc.
Business Address3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT , NEW TAIPEI,N/A Taiwan
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantJS Hsu –
Applicant Phone 309
Applicant Fax886-2-2298-1106
Applicant Email[email protected]
Applicant MailStop
Test FirmSGS-CSTC Standards Technical Services Co., Ltd
Test Firm ContactKeny Xu
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByKeny Xu – Manager
Comment [/qvavVqzAXN5qoorgpcmLA==]: Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Change in identification as specified under 47CFR2.933 of the FCC rules.
Comment [LE5yzyL3jdl1+6FFOG5roQ==]: Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. Change in identification as specified under 47CFR2.933 of the FCC rules.
Comment [MbDMSxNwh0ETIYG6Kgit6g==]: Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. Change in identification as specified under 47CFR2.933 of the FCC rules.
Comment [Z8IWI6rL6BQ5Yr5EaN0g+A==]: Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This device supports LTE Band 2, 4, 5, 7, 12, 13, 14, 17, 25, 26, 41, 66 and 71. The device was tested for QPSK, and 16QAM. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for Band 2, 4, 25 and 66; and LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for Band 5, 12 and 26 (814-824MHz); and LTE of 5, 10, 15 and 20 MHz bandwidth modes for Band 7, 41 and 71; and LTE of 5 and 10 MHz bandwidth modes for Band 13, 14, and 17; and LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for Band 26 (824-849MHz). This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The maximum antenna gain for this module as reported to the FCC is 5dBi. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. The maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed: 8 dBi in WCDMA Band 2/LTE Band 2/7/25/41, 5 dBi in WCDMA Band 4 /LTE Band 4/66, and 9.42 dBi in WCDMA Band 5, 9.41 dBi in LTE Band 5, 8.7 dBi in LTE Band 12, 9.16 dBi in LTE Band 13, 9.23 dBi in LTE Band 14, 8.74 dBi in LTE Band 14, 9.36 dBi in LTE Band 26(814-824), 9.41 dBi in LTE Band 26(824-849). 7.15 dBi in LTE Band 71. Change in identification as specified under 47CFR2.933 of the FCC rules.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC