YE3600-3165D2W

FCC ID

Equipment: Intel Dual Band Wireless-AC 3165

DT Research, Inc. 600-3165D2W

3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT, NEW TAIPEI, N/A N/A Taiwan

Application
Frequency Range
Final Action Date
Granted
BsmO/o8TmNgjDRnghq5Eig==
5180.0-5240.0
2020-03-23
APPROVED
BsmO/o8TmNgjDRnghq5Eig==
5190.0-5230.0
2020-03-23
APPROVED
BsmO/o8TmNgjDRnghq5Eig==
5260.0-5320.0
2020-03-23
APPROVED
BsmO/o8TmNgjDRnghq5Eig==
5270.0-5310.0
2020-03-23
APPROVED
BsmO/o8TmNgjDRnghq5Eig==
5500.0-5720.0
2020-03-23
APPROVED
BsmO/o8TmNgjDRnghq5Eig==
5530.0-5690.0
2020-03-23
APPROVED
BsmO/o8TmNgjDRnghq5Eig==
5745.0-5825.0
2020-03-23
APPROVED
BsmO/o8TmNgjDRnghq5Eig==
5755.0-5795.0
2020-03-23
APPROVED
tkTLX5rYFA2XgcKIOtMmYw==
-
2020-03-23
APPROVED
MT3PIWp7tB5sp8IuwIWFMQ==
2402.0-2480.0
2020-03-23
APPROVED
dlbJWR9xvVWQqfbklknNnA==
2402.0-2480.0
2020-03-23
APPROVED
dlbJWR9xvVWQqfbklknNnA==
2412.0-2462.0
2020-03-23
APPROVED
dlbJWR9xvVWQqfbklknNnA==
2422.0-2452.0
2020-03-23
APPROVED
File NameDocument TypeDateDirect
3165D2W- LabelsmplID Label/Location Info 2020-03-23 00:00:00 pdf
3165D2W- LabelLocID Label/Location Info 2020-03-23 00:00:00 pdf
3165D2W- ExphoExternal Photos 2020-03-23 00:00:00 pdf
3165D2W- FCC Auth Ltr for Change of IDCover Letter(s) 2020-03-23 00:00:00 pdf
3165D2W- Declaration of authorizationCover Letter(s) 2020-03-23 00:00:00 pdf
3165D2W- Declaration letter for electrically identicalCover Letter(s) 2020-03-23 00:00:00 pdf
3165D2W- ATTESTATIONCover Letter(s) 2020-03-23 00:00:00 pdf

Application Details:

EquipmentIntel Dual Band Wireless-AC 3165
FRN0019830793
Grantee CodeYE3
Product Code600-3165D2W
Applicant BusinessDT Research, Inc.
Business Address3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT , NEW TAIPEI,N/A Taiwan
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantJS Hsu –
Applicant Phone 309
Applicant Fax886-2-2298-1106
Applicant Email[email protected]
Applicant MailStop
Test FirmNational Technical Systems
Test Firm ContactDavid Bare
Test Firm Phone
Test Firm Fax510 578 3510
Test Firm Email[email protected]
Certified ByVincent Lin –
Comment [BsmO/o8TmNgjDRnghq5Eig==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 1.36 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules.
Comment [dlbJWR9xvVWQqfbklknNnA==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.66 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules.
Comment [MT3PIWp7tB5sp8IuwIWFMQ==]: Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body and simultaneous SAR values are: 0.01 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC