User Manual

FCC ID: YAV-EL0376

Users Manual

Download: PDF
FCCID_3810428

EL03-76 Home Automation System Interface ¤ DC12V, safety voltage ¤ Multiple units can be powered from a single power supply through the RJ45 connector. ¤ Specialized RF transmitting antenna allows remode control over larger area ¤ Double RS-485/232 interfaces to connect up to 255pcs gateway controllers. ¤ Dual master dry contact ports for sub-group and group control. ¤ External dry contact switch for local group control. ¤ 16 Channel for individual and group control, also able to build up group control of any channel through the Rs485 operation. EL03-76 ¤ Have all transmitters functions ¤ Compatible to all A-OK products Working Temp. EL03-76 16 Channels Lock Channel: If the application takes less than 16 channels, people can lock the extra channels for easier and flexible operation. Choose the wanted channel numbers by left and right selecting button, then press and hold the stop and left or right button on the device for 3 seconds till the locked channel numbers display, then released them. The same operation to unlock channel. Local Group Control: to group control all the channel on the device. 4 wires connection: Press the UP, STOP, DOWN on the device to control all the channels UP, STOP and DOWN. 3 wires connection: Press the UP, UP+DOWN, DOWN on the device to control all the channels UP, STOP and DOWN. RS485/232 central control terminal 1/2 4 wires 3 wires RS485/RS232 central control: to control any channel or multiple channels via RS485/232 central control terminal 1/2 the PC software.

Application Solutions USB/RS485 & RS232 transverter EL03-76 EL03-76 EL03-76 EL03-76 ID Setting Maximum ID 255, 16 channels Open the softwar, choose Select the correct serial port Click "options" at the top of left corner, english language choose " motor ID and channel settings" Setting successful

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two con ditions: (1) This device may not cause harmful interference, and (2) this device must accept any i nterference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the use r's authority to operate the equipment. This equipment has been tested and found to comply wit h the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are desi gned to provide reasonable protection against harmful interference in a residential installation. T his equipment generates uses and can radiate radio frequency energy and, if not installed and us ed in accordance with the instructions, may cause harmful interference to radio communications . However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter mined by turning the equipment off and on, the user is encouraged to try to correct the interfere nce by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is co nnected. -Consult the dealer or an experienced radio/TV technician for help.The device has been evaluate d to meet general RF exposure requirement. The device can be used in portable exposure conditi on without restriction. FCC ID: YAV-EL0376


Document Created: 2018-03-09 15:24:09
Document Modified: 2018-03-09 15:24:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC