Test Report

FCC ID: XR3-MAX

Test Report

Download: PDF
FCCID_3092738

MRT Technology (Suzhou) Co., Ltd Report No.: 1606RSU02104 Phone: +86-512-66308358 Report Version: V01 Fax: +86-512-66308368 Issue Date: 08-09-2016 Web: www.mrt-cert.com MEASUREMENT REPORT FCC Part 15B FCC ID: XR3-MAX APPLICANT: ONYX INTERNATIONAL INC. Application Type: Certification Product: E-reader Model No.: Max, Max Carta, Max Carta Plus, Max Pro FCC Rule Part(s): FCC Part 15 Subpart B: 2016 Test Procedure(s): ANSI C63.4: 2014 Test Date: June 17 ~ July 13, 2016 Reviewed By : ( Robin Wu ) Approved By : ( Marlin Chen ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2014. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. FCC ID: XR3-MAX Page Number: 1 of 29

Report No.: 1606RSU02104 Revision History Report No. Version Description Issue Date 1606RSU02104 Rev. 01 Initial report 08-05-2016 1606RSU02104 Rev. 02 Added serial number 08-09-2016 FCC ID: XR3-MAX Page Number: 2 of 29

Report No.: 1606RSU02104 CONTENTS Description Page §2.1033 General Information ......................................................................................................... 4 1. INTRODUCTION ..................................................................................................................... 5 1.1. Scope ........................................................................................................................... 5 1.2. MRT Test Location ........................................................................................................ 5 2. PRODUCT INFORMATION ..................................................................................................... 6 2.1. Product Specification Subjective to this Report ............................................................. 6 2.2. Test Mode .................................................................................................................... 6 2.3. Test Configuration ........................................................................................................ 7 2.4. Test System Details ...................................................................................................... 9 2.5. Test Software ............................................................................................................... 9 2.6. EMI Suppression Device(s)/Modifications ..................................................................... 9 3. DESCRIPTION OF TEST ...................................................................................................... 10 3.1. Evaluation Procedure ................................................................................................. 10 3.2. AC Line Conducted Emissions ................................................................................... 10 3.3. Radiated Emissions ..................................................................................................... 11 4. TEST EQUIPMENT CALIBRATION DATE ............................................................................ 12 5. MEASUREMENT UNCERTAINTY ......................................................................................... 13 6. TEST RESULT ...................................................................................................................... 14 6.1. Summary .................................................................................................................... 14 6.2. Conducted Emission Measurement ............................................................................ 15 6.2.1. Test Limit ................................................................................................................ 15 6.2.2. Test Setup............................................................................................................... 15 6.2.3. Test Result of Conducted Emissions ....................................................................... 16 6.3. Radiated Emission Measurement ............................................................................... 20 6.3.1. Test Limit ................................................................................................................ 20 6.3.2. Test Setup............................................................................................................... 20 6.3.3. Test Result of Radiated Emissions .......................................................................... 22 FCC ID: XR3-MAX Page Number: 3 of 29

Report No.: 1606RSU02104 §2.1033 General Information Applicant: ONYX INTERNATIONAL INC. Applicant Address: Room 102, 3rd Floor, No. 38 HongLou Road, LiWan District, GuangZhou, China Manufacturer: ONYX INTERNATIONAL INC. Manufacturer Address: Room 102, 3rd Floor, No. 38 HongLou Road, LiWan District, GuangZhou, China Test Site: MRT Technology (Suzhou) Co., Ltd Test Site Address: D8 Building, Youxin Industrial Park, No.2 Tian’edang Rd., Wuzhong Economic Development Zone, Suzhou, China MRT FCC Registration No.: 809388 FCC ID: XR3-MAX Model No.: Max, Max Carta, Max Carta Plus, Max Pro Test Device Serial No.: N/A Production Pre-Production Engineering Test Facility / Accreditations Measurements were performed at MRT Laboratory located in Tian’edang Rd., Suzhou, China.  MRT facility is a FCC registered (MRT Reg. No. 809388) test facility with the site description report on file and has met all the requirements specified in Section 2.948 of the FCC Rules.  MRT facility is an IC registered (MRT Reg. No. 11384A-1) test laboratory with the site description on file at Industry Canada.  MRT facility is a VCCI registered (R-4179, G-814, C-4664, T-2206) test laboratory with the site description on file at VCCI Council.  MRT Lab is accredited to ISO 17025 by the American Association for Laboratory Accreditation (A2LA) under the American Association for Laboratory Accreditation Program (A2LA Cert. No. 3628.01) in EMC, Telecommunications and Radio testing for FCC, Industry Canada, EU and TELEC Rules. FCC ID: XR3-MAX Page Number: 4 of 29

Report No.: 1606RSU02104 1. INTRODUCTION 1.1. Scope Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Industry Canada Certification and Engineering Bureau. 1.2. MRT Test Location The map below shows the location of the MRT LABORATORY, its proximity to the Taihu Lake. These measurement tests were conducted at the MRT Technology (Suzhou) Co., Ltd. Facility located at D8 Building, Youxin Industrial Park, No.2 Tian’edang Rd., Wuzhong Economic Development Zone, Suzhou, China. The detailed description of the measurement facility was found to be in compliance with the requirements of § 2.948 according to ANSI C63.4-2009 on September 30, 2013. FCC ID: XR3-MAX Page Number: 5 of 29

Report No.: 1606RSU02104 2. PRODUCT INFORMATION 2.1. Product Specification Subjective to this Report Product Name E-reader Model No. Max, Max Carta, Max Carta Plus, Max Pro Wi-Fi Specification 802.11b/g/n-HT20 Bluetooth Version v3.0 + HS, v4.0 Components Adapter M/N: HKC0055010-2D INPUT: 100-240V ~ 50/60Hz, 0.2A OUTPUT: 5Vdc, 1.0A 2.2. Test Mode Mode 1: Charging + Reading + Playing Music Mode 2: USB Copy FCC ID: XR3-MAX Page Number: 6 of 29

Report No.: 1606RSU02104 2.3. Test Configuration The EUT was tested per the guidance FCC Part 15 Subpart B: 2016 and ANSI C63.4: 2014 was used to reference the appropriate EUT setup for radiated spurious emissions testing and AC line conducted testing. Connection Diagram (Mode 1) FCC ID: XR3-MAX Page Number: 7 of 29

Report No.: 1606RSU02104 Connection Diagram (Mode 2) Signal Cable Type Signal Cable Description A USB Cable Shielded, 0.5m B Earphone Cable Non-Shielded, 1.2m C USB Cable Shielded, 1.8m FCC ID: XR3-MAX Page Number: 8 of 29

Report No.: 1606RSU02104 2.4. Test System Details The types for all equipments, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. Power Cord 1 Earphone Taijie N/A N/A N/A 2 Notebook Lenovo E430c MP-4CFX213/10 Non-Shielded, 1.8m 3 USB Mouse DELL MS111-T N/A N/A 2.5. Test Software 1 Setup the EUT and simulators as shown on above. 2 Turn on the power of all equipment. (1), Making EUT working on “Charging + Reading” Mode + Playing Music. 3 (2), Making EUT working on “USB Copy” Mode. 2.6. EMI Suppression Device(s)/Modifications No EMI suppression device(s) were added and/or no modifications were made during testing. FCC ID: XR3-MAX Page Number: 9 of 29

Report No.: 1606RSU02104 3. DESCRIPTION OF TEST 3.1. Evaluation Procedure The measurement procedures described in the American National Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical Equipment in the Range of 9kHz to 40GHz (ANSI C63.4-2014) was used in the measurement of the E-reader Deviation from measurement procedure…………………………….....................................None 3.2. AC Line Conducted Emissions The line-conducted facility is located inside an 8'x4'x4' shielded enclosure. A 1m x 2m wooden table 80cm high is placed 40cm away from the vertical wall and 80cm away from the sidewall of the shielded room. Two 10kHz-30MHz, 50Ω/50uH Line-Impedance Stabilization Networks (LISNs) are bonded to the shielded room floor. Power to the LISNs is filtered by external high-current high-insertion loss power line filters. These filters attenuate ambient signal noise from entering the measurement lines. These filters are also bonded to the shielded enclosure. The EUT is powered from one LISN and the support equipment is powered from the second LISN. If the EUT is a DC-powered device, power will be derived from the source power supply it normally will be powered from and this supply line(s) will be connected to the second LISN. All interconnecting cables more than 1 meter were shortened to a 1 meter length by non-inductive bundling (serpentine fashion) and draped over the back edge of the test table. All cables were at least 40cm above the horizontal reference ground-plane. Power cables for support equipment were routed down to the second LISN while ensuring that that cables were not draped over the second LISN. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the receiver and exploratory measurements were made to determine the frequencies producing the maximum emission from the EUT. The receiver was scanned from 150 kHz to 30 MHz. The detector function was set to peak mode for exploratory measurements while the bandwidth of the analyzer was set to 9 kHz. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Each emission was also maximized by varying: power lines, the mode of operation or resolution, clock or data exchange speed, scrolling H pattern to the EUT and/or support equipment whichever determined the worst-case emission. Once the worst case emissions have been identified, the one EUT cable configuration/arrangement and mode of operation that produced these emissions are used for final measurements on the same test site. Line conducted emissions test results are shown in Section 6.2. FCC ID: XR3-MAX Page Number: 10 of 29

Report No.: 1606RSU02104 3.3. Radiated Emissions The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic chamber which is shielded from any ambient interference. For measurements above 1GHz absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections. For measurements below 1GHz, the absorbers are removed. An MF Model 210SS turntable is used for radiated measurement. It is a continuously rotatable, remote controlled, metallic turntable and 2 meters (6.56 ft.) in diameter. The turn table is flush with the raised floor of the chamber in order to maintain its function as a ground plane. An 80cm high PVC support structure is placed on top of the turntable. For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive antenna height using a broadband antenna from 30 MHz up to the upper frequency shown in 15.33(b)(1) depending on the highest frequency generated or used in the device or on which the device operates or tunes. For frequencies above 1GHz, linearly polarized double ridge horn antennas were used. For frequencies below 30 MHz, a calibrated loop antenna was used. When exploratory measurements were necessary, they were performed at 1 meter test distance inside the semi-anechoic chamber using broadband antennas, broadband amplifiers, and spectrum analyzers to determine the frequencies and modes producing the maximum emissions. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The test set-up was placed on top of the 0.8 meter high, 1 x 1.5 meter table. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Appropriate precaution was taken to ensure that all emissions from the EUT were maximized and investigated. The system configuration, mode of operation, if applicable, turntable azimuth, and receive antenna height was noted for each frequency found. Final measurements were made in the semi-anechoic chamber using calibrated, linearly polarized broadband and horn antennas. The test setup was configured to the setup that produced the worst case emissions. The spectrum analyzer was set to investigate all frequencies required for testing to compare the highest radiated disturbances with respect to the specified limits. The turntable containing the EUT was rotated through 360 degrees and the height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height producing the maximum emission. Each emission was maximized by changing the orientation of the EUT through three orthogonal planes and changing the polarity of the receive antenna, whichever produced the worst-case emissions. According to 3dB beam-width of horn antenna, the horn antenna should be always directed to the EUT when rising height. FCC ID: XR3-MAX Page Number: 11 of 29

Report No.: 1606RSU02104 4. TEST EQUIPMENT CALIBRATION DATE Conducted Emissions – SR2 Instrument Manufacturer Type No. Serial No. Cali. Interval Cali. Due Date EMI Test Receiver R&S ESR7 101209 1 year 2016/11/03 Two-Line V-Network R&S ENV216 101683 1 year 2016/11/03 Two-Line V-Network R&S ENV216 101684 1 year 2016/11/03 Temperature/Humidity Meter Yuhuaze HTC-2 MRTSUE06182 1 year 2016/12/20 Radiated Emission – AC2 Instrument Manufacturer Type No. Serial No. Cali. Interval Cali. Due Date MXE EMI Receiver Agilent N9038A MY51210182 1 year 2016/08/03 Microwave System Amplifier Agilent 83017A MY53270040 1 year 2017/03/29 TRILOG Antenna Schwarzbeck VULB9162 9162-047 1 year 2016/11/07 Broad-Band Horn Antenna Schwarzbeck BBHA9120D 9120D-1167 1 year 2016/11/07 Digitial Thermometer & MingGao ETH529 MRTSUE06170 1 year 2016/11/30 Hygromete Software Version Function e3 V8.3.5 EMI Test Software FCC ID: XR3-MAX Page Number: 12 of 29

Report No.: 1606RSU02104 5. MEASUREMENT UNCERTAINTY Where relevant, the following test uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k = 2. AC Conducted Emission Measurement – SR2 Measuring Uncertainty for a Level of Confidence of 95% (U=2Uc(y)): 150kHz~30MHz: 3.5dB Radiated Emission Measurement – AC2 Measuring Uncertainty for a Level of Confidence of 95% (U=2Uc(y)): Horizontal: 30MHz~1GHz: 4.07dB 1GHz~18GHz: 4.16 dB Vertical: 30MHz~1GHz: 4.18 dB 1GHz~18GHz: 4.76 dB FCC ID: XR3-MAX Page Number: 13 of 29

Report No.: 1606RSU02104 6. TEST RESULT 6.1. Summary Company Name: ONYX INTERNATIONAL INC. Mode 1: Charging + Reading + Playing Music Test Mode: Mode 2: USB Copy FCC Part Section(s) Test Description Test Result 15.107 Conducted Emissions Pass 15.109 Radiated Emissions Pass FCC ID: XR3-MAX Page Number: 14 of 29

Report No.: 1606RSU02104 6.2. Conducted Emission Measurement 6.2.1. Test Limit FCC Part 15.107 Limits Frequency QP AV (MHz) (dBμV) (dBμV) 0.15 - 0.50 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30 60 50 Note 1: The lower limit shall apply at the transition frequencies. Note 2: The limit decreases linearly with the logarithm of the frequency in the range 0.15MHz to 0.5MHz. 6.2.2. Test Setup FCC ID: XR3-MAX Page Number: 15 of 29

Report No.: 1606RSU02104 6.2.3. Test Result of Conducted Emissions Site: SR2 Time: 2016/06/21 - 16:57 Limit: FCC_Part15.107_CE_Class B Engineer: Line Chen Probe: ENV216_101683_Filter On Polarity: Line EUT: E-reader Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 0.154 53.141 42.401 -12.641 65.781 10.740 QP 2 0.154 41.282 30.543 -14.499 55.781 10.740 AV 3 0.190 47.434 37.405 -16.603 64.037 10.029 QP 4 0.190 38.388 28.359 -15.649 54.037 10.029 AV 5 0.542 47.905 37.760 -8.095 56.000 10.145 QP 6 * 0.542 40.828 30.683 -5.172 46.000 10.145 AV 7 1.310 41.240 31.343 -14.760 56.000 9.897 QP 8 1.310 32.156 22.259 -13.844 46.000 9.897 AV 9 1.813 41.920 32.043 -14.080 56.000 9.878 QP 10 1.813 32.409 22.532 -13.591 46.000 9.878 AV 11 2.931 41.632 31.779 -14.368 56.000 9.854 QP 12 2.931 33.068 23.214 -12.932 46.000 9.854 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB). FCC ID: XR3-MAX Page Number: 16 of 29

Report No.: 1606RSU02104 Site: SR2 Time: 2016/06/21 - 17:03 Limit: FCC_Part15.107_CE _ Class B Engineer: Line Chen Probe: ENV216_101683_Filter On Polarity: Neutral EUT: E-reader Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 0.154 51.859 41.143 -13.923 65.781 10.716 QP 2 0.154 36.011 25.295 -19.771 55.781 10.716 AV 3 0.194 45.987 35.965 -17.877 63.864 10.021 QP 4 0.194 30.587 20.566 -23.276 53.864 10.021 AV 5 * 0.510 46.409 36.233 -9.591 56.000 10.176 QP 6 0.510 34.419 24.242 -11.581 46.000 10.176 AV 7 1.218 44.676 34.774 -11.324 56.000 9.901 QP 8 1.218 32.100 22.199 -13.900 46.000 9.901 AV 9 2.042 46.372 36.500 -9.628 56.000 9.872 QP 10 2.042 34.476 24.604 -11.524 46.000 9.872 AV 11 3.058 42.921 33.055 -13.079 56.000 9.866 QP 12 3.058 30.403 20.536 -15.597 46.000 9.866 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB). FCC ID: XR3-MAX Page Number: 17 of 29

Report No.: 1606RSU02104 Site: SR2 Time: 2016/06/22 - 09:36 Limit: FCC_Part15.107_CE_Class B Engineer: Line Chen Probe: ENV216_101683_Filter On Polarity: Line EUT: E-reader Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 * 0.162 46.048 35.951 -19.313 65.361 10.097 QP 2 0.162 31.862 21.765 -23.498 55.361 10.097 AV 3 0.218 33.987 24.042 -28.908 62.895 9.945 QP 4 0.218 19.008 9.063 -33.887 52.895 9.945 AV 5 0.570 26.701 16.571 -29.299 56.000 10.130 QP 6 0.570 15.441 5.311 -30.559 46.000 10.130 AV 7 0.762 18.500 8.469 -37.500 56.000 10.031 QP 8 0.762 6.497 -3.534 -39.503 46.000 10.031 AV 9 8.670 21.797 11.619 -38.203 60.000 10.178 QP 10 8.670 14.806 4.627 -35.194 50.000 10.178 AV 11 24.414 18.692 8.484 -41.308 60.000 10.208 QP 12 24.414 12.890 2.682 -37.110 50.000 10.208 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB). FCC ID: XR3-MAX Page Number: 18 of 29

Report No.: 1606RSU02104 Site: SR2 Time: 2016/06/22 - 09:40 Limit: FCC_Part15.107_CE _ Class B Engineer: Line Chen Probe: ENV216_101683_Filter On Polarity: Neutral EUT: E-reader Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 * 0.166 46.137 36.066 -19.021 65.158 10.071 QP 2 0.166 35.758 25.687 -19.400 55.158 10.071 AV 3 0.186 42.162 32.127 -22.051 64.213 10.035 QP 4 0.186 27.558 17.523 -26.656 54.213 10.035 AV 5 0.222 32.942 22.962 -29.802 62.744 9.980 QP 6 0.222 19.547 9.567 -33.197 52.744 9.980 AV 7 0.566 24.502 14.352 -31.498 56.000 10.150 QP 8 0.566 11.235 1.086 -34.765 46.000 10.150 AV 9 8.650 19.279 9.082 -40.721 60.000 10.197 QP 10 8.650 12.495 2.298 -37.505 50.000 10.197 AV 11 17.746 18.464 8.331 -41.536 60.000 10.133 QP 12 17.746 10.712 0.579 -39.288 50.000 10.133 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB). FCC ID: XR3-MAX Page Number: 19 of 29

Report No.: 1606RSU02104 6.3. Radiated Emission Measurement 6.3.1. Test Limit FCC Part 15.109 Limits Frequency Distance Level (MHz) (m) (dBμV/m) 30 - 88 3 40 88 - 216 3 43.5 216 - 960 3 46 Above 960 3 54 Note 1: The lower limit shall apply at the transition frequency. Note 2: Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. Note 3: E field strength (dBμV/m) = 20 log E field strength (uV/m) 6.3.2. Test Setup 30MHz ~ 1GHz Test Setup: FCC ID: XR3-MAX Page Number: 20 of 29

t=im (Antenna Tower) l Antenna EUT ; mm 3 m 0.8 m * (Turntable) ' ' ' | I | | Pre—Amplifier perman o y— @ R L |

Report No.: 1606RSU02104 6.3.3. Test Result of Radiated Emissions Site: AC2 Time: 2016/07/12 - 16:51 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Line Chen Probe: VULB9162_0.03-8GHz Polarity: Horizontal EUT: E-reader Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 165.315 32.833 22.782 -10.667 43.500 10.051 100 107 QP 2 181.320 31.827 20.790 -11.673 43.500 11.037 100 201 QP 3 232.245 30.932 17.771 -15.068 46.000 13.161 100 193 QP 4 390.840 30.522 13.997 -15.478 46.000 16.526 100 177 QP 5 * 480.080 38.668 20.671 -7.332 46.000 17.997 100 335 QP 6 709.000 33.005 11.261 -12.995 46.000 21.744 100 281 QP Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: XR3-MAX Page Number: 22 of 29

Report No.: 1606RSU02104 Site: AC2 Time: 2016/07/12 - 16:51 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Line Chen Probe: VULB9162_0.03-8GHz Polarity: Vertical EUT: E-reader Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 57.160 24.248 9.932 -15.752 40.000 14.316 100 118 QP 2 * 166.285 30.028 19.931 -13.472 43.500 10.097 100 102 QP 3 181.320 27.699 16.662 -15.801 43.500 11.037 100 209 QP 4 480.080 29.114 11.117 -16.886 46.000 17.997 100 347 QP 5 614.910 24.717 4.441 -21.283 46.000 20.276 100 67 QP 6 720.155 28.889 7.003 -17.111 46.000 21.886 100 278 QP Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: XR3-MAX Page Number: 23 of 29

Report No.: 1606RSU02104 Site: AC2 Time: 2016/07/12 - 16:51 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Line Chen Probe: VULB9162_0.03-8GHz Polarity: Horizontal EUT: E-reader Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 66.375 24.390 12.298 -15.610 40.000 12.092 100 247 QP 2 180.350 30.966 20.003 -12.534 43.500 10.962 100 214 QP 3 252.615 33.686 19.936 -12.314 46.000 13.750 100 56 QP 4 288.990 33.625 19.271 -12.375 46.000 14.353 100 162 QP 5 * 395.980 42.967 26.300 -3.033 46.000 16.667 100 152 QP 6 415.090 39.079 22.118 -6.921 46.000 16.961 100 102 QP Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: XR3-MAX Page Number: 24 of 29

Report No.: 1606RSU02104 Site: AC2 Time: 2016/07/12 - 16:51 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Line Chen Probe: VULB9162_0.03-8GHz Polarity: Vertical EUT: E-reader Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 * 36.790 33.019 19.782 -6.981 40.000 13.237 100 125 QP 2 47.460 30.332 15.362 -9.668 40.000 14.969 100 76 QP 3 108.085 27.130 14.118 -16.370 43.500 13.013 100 287 QP 4 180.350 30.080 19.117 -13.420 43.500 10.962 100 219 QP 5 395.690 33.983 17.328 -12.017 46.000 16.654 100 155 QP 6 415.090 32.252 15.291 -13.748 46.000 16.961 100 98 QP Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: XR3-MAX Page Number: 25 of 29

Report No.: 1606RSU02104 Site: AC2 Time: 2016/07/12 - 16:03 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Line Chen Probe: BBHA9120D_1-18GHz Polarity: Horizontal EUT: E-reader Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 1884.000 33.685 38.942 -40.315 74.000 -5.256 100 261 PK 2 1884.500 24.268 29.521 -29.732 54.000 -5.253 100 270 AV 3 3235.500 36.141 38.612 -37.859 74.000 -2.471 100 118 PK 4 3236.000 26.896 29.371 -27.104 54.000 -2.475 100 123 AV 5 6474.000 40.473 33.368 -33.527 74.000 7.105 100 330 PK 6 * 6474.500 31.096 23.983 -22.904 54.000 7.113 100 323 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) – Pre_Amplifier Gain (dB). FCC ID: XR3-MAX Page Number: 26 of 29

Report No.: 1606RSU02104 Site: AC2 Time: 2016/07/12 - 16:03 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Line Chen Probe: BBHA9120D_1-18GHz Polarity: Vertical EUT: E-reader Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 1561.000 33.317 39.382 -40.683 74.000 -6.065 100 220 PK 2 1561.500 23.942 30.001 -30.058 54.000 -6.060 100 208 AV 3 6882.000 42.492 34.185 -31.508 74.000 8.307 100 313 AV 4 6882.500 33.324 25.016 -20.676 54.000 8.308 100 324 PK 5 9755.000 47.097 34.124 -26.903 74.000 12.973 100 69 PK 6 * 9755.500 38.392 25.421 -15.608 54.000 12.970 100 76 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) – Pre_Amplifier Gain (dB). FCC ID: XR3-MAX Page Number: 27 of 29

Report No.: 1606RSU02104 Site: AC2 Time: 2016/07/12 - 16:08 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Line Chen Probe: BBHA9120D_1-18GHz Polarity: Horizontal EUT: E-reader Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 2394.000 34.904 37.568 -39.096 74.000 -2.664 100 78 PK 2 2394.500 25.007 27.672 -28.993 54.000 -2.665 100 85 AV 3 5131.000 37.011 33.857 -36.989 74.000 3.154 100 178 PK 4 5131.500 27.829 24.679 -26.171 54.000 3.150 100 183 AV 5 9228.000 45.246 32.111 -28.754 74.000 13.135 100 214 PK 6 * 9228.500 36.334 23.217 -17.666 54.000 13.117 100 220 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) – Pre_Amplifier Gain (dB). FCC ID: XR3-MAX Page Number: 28 of 29

Report No.: 1606RSU02104 Site: AC2 Time: 2016/07/12 - 16:08 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Line Chen Probe: BBHA9120D_1-18GHz Polarity: Vertical EUT: E-reader Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 2292.000 35.143 37.270 -38.857 74.000 -2.127 100 117 PK 2 2292.500 26.405 28.532 -27.595 54.000 -2.127 100 121 AV 3 6151.000 40.191 34.411 -33.809 74.000 5.779 100 230 PK 4 6151.500 31.005 25.226 -22.995 54.000 5.779 100 224 AV 5 8803.000 44.648 32.921 -29.352 74.000 11.727 100 356 PK 6 * 8803.500 35.061 23.336 -18.939 54.000 11.725 100 349 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) – Pre_Amplifier Gain (dB). The End FCC ID: XR3-MAX Page Number: 29 of 29


Document Created: 2017-12-11 23:38:34
Document Modified: 2017-12-11 23:38:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC