User manual

FCC ID: XN6-SB3820-C6

Users Manual

Download: PDF
FCCID_2468443

1202-0001161 QUICK START GUIDE

IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric • Do not overload power strips and extension cords. Overloading can result in fire or electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, shock. and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. • The wall socket should be located near your Unit and be easily accessible • Read these instructions. • Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock. • Keep these instructions. • Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord • Heed all warnings. and contact your dealer immediately. Do not try to repair your Unit yourself. • Follow all instructions. • Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. • Do not use this apparatus near water. Continued use of your Unit may cause fire or electric shock. • Clean only with a dry cloth. • Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may cause fire or electric shock. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Ensure that the power cord and any other cables are unplugged before moving your Unit. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your Unit will not be used for an extended period of time, • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with unplug the power cord. one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician • To reduce risk of electric shock, do not touch the connector with wet hands. for replacement of the obsolete outlet. • Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and leak which can damage the remote control or injure the operator. the point where they exit from the apparatus. • See the important note and rating located on the back of the unit. • Only use attachments/accessories specified by the manufacturer. • WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture. sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in fire. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION RISK OF ELECTRIC SHOCK • To reduce the risk of electric shock or component damage, switch off the power before connecting other DO NOT OPEN components to your Unit. Explanation of WARNING symbols: • Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners. The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the product that may be sufficient magnitude to • Always use the accessories recommended by the manufacturer to insure compatibility. constitute a risk of shock to persons. • When moving your Unit from an area of low temperature to an area of high temperature, condensation may The exclamation point within an equilateral triangle is intended to alert the user to the presence of form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component damage. important operating and servicing instructions in the literature accompanying the appliance. • Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided. • Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit. • When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug the power cord.

PACKAGE CONTENTS High Definition Sound Bar Remote Control This Quick with Batteries Start Guide Power Cable Stereo RCA to 3.5mm Digital Optical Audio Cable Cable 2 x Sound Bar Wall 2 x Wall Wall Mount Mount Brackets Mount Screws Template (Size: M4 x 10mm)

CONTROLS & CONNECTIONS Back of Sound Bar L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W SUB OUT SERVICE USB (6) DIGITAL (3) AUX (1) L Coaxial In DIGITAL (3) OPTICAL (4) AUX (1) Analog Audio In R (Stereo RCA) OPTICAL (4) Digital Optical Audio In AUX (2) AUX (2) AC IN 120V~ ∕ 60Hz Analog Audio In (Stereo 3.5mm) 60W SUB OUT SERVICE USB (6) Power Port Service Port USB* (6) SUB OUT For use by service USB In Subwoofer Out technicians only. *Supports .WAV file format playback only

L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W SUB OUT SERVICE USB (6) Back of Sound Bar Control Buttons are located here: Power Press to turn soundbar on or off. Input Press to change the audio source. Bluetooth Input Hold to pair. (See ‘Bluetooth Pairing’ for more information.) + Volume Increase or decrease the - loudness of the audio.

FIRST-TIME SETUP Back of Sound Bar 1 GOOD GOOD BETTER BETTER 3.5MM TO 3.5MM TO DIGITAL COAXIAL DIGITAL OPTICAL RCA CABLE RCA CABLE CABLE†‡ CABLE† CHOOSE ONE CABLE: BETTER GOOD AND CONNECT IT TO YOUR TV * Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other † When using either of the Digital Inputs, if there is no audio: (A) try setting the TV output to PCM or devices (Blu-ray player, game system, etc.) see your device’s user manual. (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio. ‡ Cable not included.

L 2 DIGITAL (3) AUX (1) R Connect the Power Cable to the Sound Bar. OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W SUB OUT SERVICE USB (6) L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W SUB OUT SERVICE USB (6) CAL 3 Plug the Power Cable into a power outlet.

4 Sound Bar is centered below the TV. For the best surround sound experience, position the Sound Bar as shown. The Sound Bar should be close to ear level.

5 Top 6 Top Remove the battery cover Insert the included batteries by gently sliding it away and gently slide the battery from the remote. cover back into place. 7 Turn your TV on, then press the Power button Input Power on the remote to turn the Sound Bar on. Press the Input button to switch between audio sources. For example, if you connected your TV to Input 1, set the Sound Bar to Input 1. Hardware setup is complete.

USING THE REMOTE Bluetooth Input Press to enter Bluetooth input. Press to change input source. (To enter force pair mode, press and hold for 5 seconds) Power Press to turn on or off. Volume + Enter/Play/Pause Press to increase volume. Press to select an option. Press to play or pause. Previous Press to return to previous track. Next (Changes Treble and Bass levels) Press to skip to the next track. (Changes Treble and Bass levels) Volume – TruVolume Press to decrease volume. Press to enable/disable TruVolume. Treble TruSurround HD Press to enter treble adjustment mode. Press to enable/disable TruSurround HD. Bass Press to enter bass adjustment mode. Mute Press to mute/unmute.

LED INDICATORS LED Indicators are located here: The LED Indicators will behave differently with each button on the remote control. Function LED Behavior Description Analog Audio In - AUX (1) Press the INPUT button on the remote to cycle through the available inputs: Analog Audio In - AUX (2) • Analog Audio In - AUX Stereo RCA (1) Coaxial In - Digital (3) • Analog Audio In - AUX Stereo 3.5mm (2) Input • Coaxial In- Digital (3) Digital Optical Audio In - Optical (4) • Digital Optical Audio In - Optical (4) • Bluetooth Bluetooth (When searching for device) Press and hold the button on the remote. The Sound Bar will be discoverable for 15 Bluetooth Pairing Flash from Left to Right minutes. You can now search for the Sound Bar (VIZIO S3820w) using your Bluetooth Device. and back continuously. The sound bar will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the Sound Bar. TruVolume On: Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume DTS TruVolume provides a consistent and comfortable volume level for a more enjoyable listening de. On/Off TruVolume Off: experience. TruSurround On: Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all inputs will DTS TruSurround produce virtual surround sound. When disabled (Off), all sources will playback in stereo. On/Off TruSurround Off: Two center LEDs indicate Press the TREBLE button then press the Next/Previous button to increase/decrease the Treble Levels Treble level 0. treble level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels. Two center LEDs indicate Press the BASS button then press the Next/Previous button to increase/decrease the bass Bass Levels Bass level 0. level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels. Dolby Digital is only available on either the Coaxial In or Digital Optical Audio In inputs. Dolby Digital Logo. Dolby Digital When a Dolby Digital signal is detected, the Dolby Digital logo will light up for 5 seconds before fading away.

BLUETOOTH PAIRING To pair the Sound Bar with a Bluetooth device: 1. Press and hold the Bluetooth button on the Sound Bar or the Bluetooth button on the remote for five (5) seconds. When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from left to right and back again. Once the device is paired, the LED Indicators will stop flashing. 2. You can now search for the Sound Bar (VIZIO S3820w) using your Bluetooth device. For more information, see the documentation that came with your device. 3. Play audio from your Bluetooth device. Volume can be controlled on your source device and the Sound Bar. Back of Sound Bar

USING BLUETOOTH MODE Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain paired, even if you change the input on the Sound Bar. Your Sound Bar is not equipped with a microphone, so it cannot operate as a hands-free device for a smartphone. Maximizing Signal A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection. Try the following if your sound quality is less than optimal: • If you hear any break-up or disconnect while streaming music from your device, move the source device closer to the Sound Bar. • Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the source device. • Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve Bluetooth range. Reduce the volume levels on your device and on the Sound Bar before pressing Play. High volume levels can damage your hearing.

ADVANCED SETUP Connect up to four (4) different devices Back of Sound Bar to the Sound Bar (devices shown are examples; you can use any device). To listen to a device, change the input source on the Sound Bar. Optical, Coaxial, and 3.5mm cables transmit audio only. Connecting a video device requires a separate video connection from the device to your TV. RCA AUDIO DIGITAL COAXIAL USB DIGITAL OPTICAL 3.5mm AUDIO CABLE CABLE THUMB DRIVE* CABLE† CABLE Game Console Network Media Player Tablet/MP3 Player/Laptop † Cable not included. * Supports .WAV file format playback only.

CONNECTING A SUBWOOFER Back of Sound Bar L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W SUB OUT SERVICE USB (6) Optional Subwoofer* To connect a subwoofer: 1. Press the BASS button on the remote control to enter bass adjustment mode. 2. Use the Previous/Next buttons to adjust the bass level to the center position. 3. Power Off the Sound Bar and Subwoofer. Connect an RCA cable from the Sound Bar to the Subwoofer. 4. Power On the Sound Bar and Subwoofer. RCA Subwoofer Cable* 5. Manually adjust the SUB gain (Volume) and phase to your preference. See your subwoofer’s user manual for more information. 6. Use the BASS button on the remote control to adjust the subwoofer’s output. *RCA subwoofer cable and subwoofer not included.

WALL MOUNTING THE SOUND BAR 1 Wall-Mount Back of Sound Bar Screw Holes L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W SUB OUT SERVICE USB (6) Insert the two wall-mount screws into the wall-mount screw holes, and then tighten them with a Phillips screwdriver. 2 Place the included wall mounting template against the wall under your TV. Mark the four bracket holes using a pencil.

3 Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors (for brick/concrete walls). Screws for attaching the brackets to the wall are not included. Choose the screw type and length appropriate to your home’s construction. If in doubt, consult a professional installer. 22.5 in (571.5 mm) Wall Mount Screw Screw Size: M4 x 10 If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer.

USING BUTTON COMBINATIONS There are 3 functions that are triggered by 3 different button combinations on the Sound Bar. Function LED Behavior Description All 12 LEDs will Reset the Sound Bar to the factory default settings. To perform a Factory Reset, Press and Hold Factory flash 3 times: the Bluetooth( ) and Volume Down (—) buttons for 5 seconds. Reset Note: This will erase all settings and preferences that you have set. Enable VIZIO TV Remote: VIZIO TV Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume Remote Disable VIZIO TV Remote: of the sound bar. To enable/disable this function, Press and Hold the Power ( ) and Volume Up ( + )buttons for 5 seconds. Control Enable Energy Star: When the Energy Star setting is enabled, the sound bar will automatically power down after a period of inactivity. When disabled, the sound bar will remain powered on until you turn Energy Star Disable Energy Star: it off. To enable/disable this function, Press and Hold the Power ( ) and Volume Down (—) buttons for 5 seconds. Note: Energy Star setting is enabled by default. Back of Sound Bar Power Input Bluetooth Input + Volume -

HELP & TROUBLESHOOTING • Press the POWER button on the remote control or on the top of your Sound Bar. There is no power. • Ensure the power cord is securely connected. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. • Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar. • Press MUTE on the remote to ensure the Sound Bar is not muted. • Press INPUT on the remote or on the top of your Sound Bar to select a different input source. • When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to There is no sound. your Blu-ray/other source, some TVs do not pass through digital audio. • On digital inputs, the input LEDs will flash rapidly if an unsupported format is present. Set the source to output PCM. • Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information. • If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted. • Ensure all cables and wires are securely connected. I hear buzzing or • Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may humming. be with the original device. • Connect your device to a different input on the Sound Bar. • Replace the remote batteries with new ones. The remote • Point the remote directly at the center of the Sound Bar when pressing a button. isn’t working. • If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application. (e.g., Pandora doesn’t support the Back button.)

Take A Moment To Register Your Product At D VIZIO.COM/PRODUCT-REGISTRATION S Fi Why Register? • • Customized Support • Get assistance quickly with your information on-hand. • • News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications. Yo a Ph Em H REGISTER YOUR VIZIO PRODUCT NOW M Sa

Do You Have Questions? Find Answers At SUPPORT.VIZIO.COM Find help with: • New Product Setup • Connecting Your Devices • Technical Problems • Product Updates • And More Live Chat Support Available You can also contact our award-winning support team at: Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Hours Of Operation: Monday - Friday: 7 am to 11 pm (CST) Saturday - Sunday: 9 am to 6 pm (CST)

ONE-YEAR LIMITED WARRANTY LEG ON PARTS AND LABOR FCC C Covers units purchased as new in United States and Puerto Rico Only NOTE: T VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option reason and discretion. and us particu To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through user is Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period. 1. Reo 2. Incr Parts and Labor 3. Con There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts 4. Con and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater. Type of Service This de Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return must a shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE. Notice Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support 1. The will provide instructions for packing and shipping the covered Product to the VIZIO service center. 2. Shie Limitations and Exclusions 3. The VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper such operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine RF Exp maintenance are not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller. This de radio f THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABIL- uncon ITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE IC Stat OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL Opera LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY 1. This GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. 2. This CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION. ope SPECIFICATIONS IC Rad This eq environ Sound Bar: Two 3” High-Efficiency Full-Range Transducers Sound Pressure Level (System): 98 dB betwee Two 2” x 4” Bass Radiators Frequency Response (System): 70 Hz - 19 KHz Dispos Inputs: One 3.5mm Stereo Audio One RCA Stereo Audio Voltage: 120 VAC, 60 Hz You mu One Optical (Toslink) produc Compliances: UL, C-UL, FCC house One Digital Coaxial Audio Bluetooth (Wireless) Other: Image

LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer- ence received, including interference that may cause undesired operation. Notice: 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. IC Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . For DTS patents, see http://patents.dts.com. Manufactured Son fonctionnement est soumis aux deux conditions suivantes : under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, ( 1 ) Ce dispositif ne peut causer d'interférences ; et and DTS TruSurround is a trademark of DTS, Inc. DTS, Inc. All Rights Reserved. ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, IC Radiation Exposure Statement and DTS TruVolume is a trademark of DTS, Inc. © DTS, Inc. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled All Rights Reserved. environment. This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings Disposal and Recycling will be achieved. Changing the factory default settings or You must dispose of this product properly, according to local laws and regulations. Because this enabling other features will increase power consumption product contains electronic components and a battery, it must be disposed of separately from that could exceed the limits necessary to qualify for ENERGY household waste. Contact local authorities to learn about disposal and recycling options. STAR rating. We want to help you save energy. Other: Image(s) used under license from Shutterstock.com

© 2014 VIZIO INC. ALL RIGHTS RESERVED. 140729OC-US-NC


Document Created: 2014-12-05 09:16:35
Document Modified: 2014-12-05 09:16:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC