Users Manual

FCC ID: XMF-SPBTWAVE2

Users Manual

Download: PDF
FCCID_3803055

BTD15-E 快速指南卡,英语,355.6*139.7mm(折叠后尺寸44.45x139.7mm),材质:80g书纸(17L V3 FINAL FOR PRINT NS-SPBTWAVE2_17-0900_QSG_V3_EN.ai 1 2/1/2018 10:10:31 AM Flat size (W×H): 355.6 × 139.7 mm Final folded size: 44.45 × 139.7 mm IMPORTANT SAFETY INSTRUCTIONS CHARGING YOUR SPEAKER 5 To disconnect, un-pair your Bluetooth device from your speaker. • Read these instructions. 1 Connect the small end of the charging cable to the micro USB port on OR • Keep these instructions. the back of your speaker. Press and hold (call) for three seconds on your speaker. Your • Heed all warnings. 2 Connect the other end to a USB port on your computer or wall adapter Bluetooth devices loses connection automatically. QUICK SETUP GUIDE • Follow all instructions. Portable • • Do not use this speaker near water. Clean only with a dry cloth. when the speaker is fully charged. Note Audio cable • Connect a 3.5 mm audio cable (not included) from your speaker’s AUX jack to your audio device’s headphone/audio out jack. Bluetooth Speaker • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The LED indicator blinks blue slowly while connected to an audio • Do not install near any heat sources such as radiators, heat registers, cable. RECONNECTING TO A PAIRED DEVICE PACKAGE CONTENTS • Unplug this speaker during lightning storms or when unused for long When your speaker is not paired to a device, the LED blinks blue. • Bluetooth speaker • USB cable • Quick Setup Guide periods of time. Your speaker loses the Bluetooth connection if you... To reconnect... when the speaker has been damaged in any way, such as if the speaker FEATURES is dropped, exposed to liquids, or does not operate normally. Turn on your speaker. Your speaker searches • Wirelessly stream from any Bluetooth device for the last connected Bluetooth device and reconnects. • Rechargeable battery lasts up to 12 hours • Do not store the product in an extremely cold or warm environment. Move the Bluetooth device out Make sure that your Bluetooth device is • Speakerphone for hands-free calling • Never dismantle the product. of range. within 33 feet of your speaker. • Rubber feet support a horizontal or vertical orientation • Never let children play with the product. Turn on your Bluetooth device, then make Power button • Do not expose the product to dampness or moisture. sure that Bluetooth is on. Front view Back view • The product should not be exposed to dripping or splashing. Turn on Bluetooth on your Bluetooth device. Note: The battery in this speaker cannot be replaced by the user. Bluetooth device. Volume +/- buttons CONNECTING AN AUDIO DEVICE Connect your Bluetooth device Disconnect your Bluetooth device from the Call button Bluetooth to another Bluetooth device. other Bluetooth device, then set your device 1 Press and hold (power) to turn on your speaker. The LED indicator to pairing mode. Select NS-SPBTWAVE2 on Rubber your Bluetooth device. feet blinks blue quickly and your speaker automatically enters pairing mode. 2 Make sure that your Bluetooth device is within 33 ft. (10 m) of your Note: The Bluetooth range (33 ft./10 m) may be reduced if the wireless signal speaker. has to pass through walls or other obstructions. AUX IN 3 Turn on your Bluetooth device, turn on Bluetooth, then enter pairing jack mode. For more information, see the documentation that came with Reset hole your Bluetooth device. LED indicator Micro 4 On your Bluetooth device, select NS-SPBTWAVE2. Your speaker pairs USB port with your Bluetooth device and the LED indicator lights solid blue. Before using your new product, please read these instructions to prevent any damage.

NS-SPBTWAVE2_17-0900_QSG_V3_EN.ai 2 2/1/2018 10:10:37 AM USING YOUR SPEAKER TROUBLESHOOTING LEGAL NOTICES RSS Listening to audio FCC IC Statement PROBLEM SOLUTION 1 Connect to your speaker with Bluetooth or an audio cable. This device complies with Part 15 of the FCC rules. Operation is subject This device complies with Industry Canada licence exempt RSS 2 Play audio on your connected device. No power • Make sure that your speaker’s battery is charged. to the following two conditions: 1) this device may not cause harmful standard(s). Operation is subject to the following two conditions: (1) 3 Press + or - to adjust your speaker’s volume. • Make sure that your speaker is turned on. interference, and 2) this device must accept any interference received, this device may not cause interference, and (2) this device must Note: Make sure that your connected device’s volume is set to at least 50%. including interference that may cause undesired operation. accept any interference, including interference that may cause No sound or low volume • Make sure that your Bluetooth device is turned on, Bluetooth is turned on, undesired operation of the device. 4 Use the controls on your connected device to control playback. This equipment has been tested and found to comply with the limits for and NS-SPBTWAVE2 is selected. Le présent appareil est conforme aux CNR d'Industrie Canada • Turn up the volume on your speaker and Bluetooth device. Make sure that a Class B digital device, pursuant to Part 15 of the FCC rules. These limits your Bluetooth device is not muted. are designed to provide reasonable protection against harmful applicable s aux appareils radio exempts de licence. L'exploitation est TAKING A PHONE CALL • Make sure that your speaker is not paired to another Bluetooth device. interference in a residential installation. This equipment generates, uses, autorisée aux deux conditions suiv antes : (1) l'appareil ne doit pas Using your speaker • Make sure that your Bluetooth device is not paired to another Bluetooth and can radiate radio frequency energy and if not installed and used in produire de brouillage, et (2) l'utilisateur de l'appareil doit accept er The following functions are available when paired to a phone with device. accordance with the instructions, may cause harmful interference to tout brouillage radioélectrique subi, même si le brouillage est Bluetooth: • Shorten the distance between your speaker and your Bluetooth device. radio communications. However, there is no guarantee that interference susceptible d'en comprom ettre le fonctionnement. • Reject an incoming call: Press and hold (call). will not occur in a particular installation. If this equipment does cause IFETEL Statement Cannot establish • Make sure that your speaker is in pairing mode. Press and hold the • Answer an incoming call: Press (call). Bluetooth connection (call) button to reenter pairing mode. harmful interference to radio or television reception, which can be La operación de este equipo está sujeta a las siguientes dos • Shorten the distance between your speaker and your Bluetooth device. determined by turning the equipment off and on, the user is condiciones: 1. es posible que este equipo o dispositivo no cause • Switch audio between your speaker and phone: Press and hold • Turn your devices off, then on. Re-pair your speaker and your Bluetooth encouraged to try correct the interference by one or more of the interferencia perjudicial y 2. este equipo debe aceptar cualquier (call). device. following measures: interferencia, incluyendo la que pueda causar su propia operación no • End current call: Press (call). • Make sure that your speaker is not paired to another Bluetooth device. - Reorient the receiving antenna. deseada. • Redial the last dialed number: Press (call) twice. • Make sure that your speaker and Bluetooth device are both in pairing mode. - Increase the separation between the equipment and receiver. • Make sure that your Bluetooth device supports Bluetooth v4.0 and below. • Make sure that your Bluetooth device is not connected to any other device. - Connect the equipment into an outlet on a circuit different from that to LED indicator ONE-YEAR LIMITED WARRANTY • Make sure that you have selected NS-SPBTWAVE2 on your Bluetooth which the receiver is connected. LED FUNCTION device. Visit www.insigniaproducts.com for details. - Consult the dealer or an experienced radio/TV technician for help. Blinks blue quickly Bluetooth pairing mode • Disconnect any audio cables connected to your speaker’s AUX jack. You are cautioned that changes or modifications not expressly Lights solid blue Paired to a Bluetooth device My Bluetooth device • Shorten the distance between your speaker and your Bluetooth device. approved by the party responsible for compliance could void your CONTACT INSIGNIA: Blinks blue slowly Connected to an AUX device keeps unpairing • If the battery on your Bluetooth device is low, recharge the battery. authority to operate the equipment. 1-877-467-4289 (U.S. and Canada) Lights red Speaker is charging (charging complete when LED • If the battery on your speaker is low, recharge the battery. Note: The manufacturer is not responsible for any radio or TV interference caused 01-800-926-3000 (Mexico) turns off) by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. www.insigniaproducts.com “NS-SPBTWAVE2” does • Shorten the distance between your speaker and your Bluetooth device. not appear on my • Put your speaker into pairing mode, then refresh your list of Bluetooth SPECIFICATIONS Bluetooth device devices. For more information, see the documentation that came with your INSIGNIA is a trademark of Best Buy and its affiliated companies • Range: 33 ft. (10 m) Bluetooth device. Distributed by Best Buy Purchasing, LLC • Dimensions (H × W × D): 6.77 × 2.75 × 2.75 in. (17.2 × 7 × 7 cm) • Run time: 12 hours 7601 Penn Ave South, Richfield, MN 55423 U.S.A. Poor sound quality • Move your speaker and Bluetooth device closer together. • Battery size: 2,000 mAh • Charge time: 4.5 hours ©2018 Best Buy. All rights reserved. • Try a different music source. • Pair your speaker to a different mobile device. Made in China • Wattage: 3W • Weight: 1.01 lbs. (0.46 kg) • USB cable length: 11.8 in. (30 cm) • Try changing the volume on your and music source. V3 ENGLISH 17-0900


Document Created: 2018-02-02 09:26:06
Document Modified: 2018-02-02 09:26:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC