Test Report

FCC ID: XKB-IUR250

Test Report

Download: PDF
FCCID_1654346

Rapport d’essai / Test report JDE : 110116 N° 249971-R1-E DELIVRE A / ISSUED TO : INGENICO M. LEBONNOIS Etienne 1 Rue Claude Chappe B.P. 348 07503 GUILHERAND GRANGES Objet / Subject : Essais de compatibilité électromagnétique conformément aux normes : Electromagnetic compatibility tests according to the standards: FCC CFR 47 Part 15, Subpart B. ANSI C63.4 (2003) Matériel testé / Apparatus under test : • Produit / Product : IUR250 • Marque / Trade mark : INGENICO • Constructeur / Manufacturer : INGENICO • Type / Model : IUR250-01T1659A • N° de série / serial number : 11293IU00000518 • FCCID XKB-IUR250 st th Date des essais / Test date : Du 21 au 29 Novembre 2011 / From November 21 to 29 , 2011 Lieu d’essai / Test location : LCIE SUD-EST ZI Centr’Alp – 170 rue de Chatagnon 38430 MOIRANS - FRANCE Test réalisé par / Test performed by : Anthony MERLIN / Nicolas BILLAUD document comporte / Composition of document: 15 pages MOIRANS, LE 31 JANVIER 2012 / JANUARY 31ST, 2012 Ecrit par / Written by, Approuvé par / Approved by, Anthony MERLIN Jacques LORQUIN La reproduction de ce document n'est autorisée que sous sa forme intégrale. Toute reproduction partielle ou toute insertion de résultats dans un texte d'accompagnement en vue de leur diffusion doit recevoir un accord préalable et formel du LCIE. Ce document résulte d’essais effectués sur un spécimen, un échantillon ou une éprouvette. Il ne préjuge pas de la conformité de l’ensemble des produits fabriqués à l’objet essayé. Sauf indication contraire, la décision de conformité prend en compte l’incertitude de mesures. Il ne préjuge en aucun cas d’une décision de certification. This document shall not be reproduced, except in full, without t he written approval of the LCIE. This document contains results related only to the item tested. It does not imply the conformity of the whole production to the item tested .Unless otherwise specified; the decision of conformity takes into account the uncertainty of measures. This document does not anticipate any certification decision.

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 2 / 15 SUMMARY 1. TEST PROGRAM ................................................................................................................................... 3 2. APPARATUS UNDER TEST: CONFIGURATION ................................................................................... 4 3. MEASUREMENT OF CONDUCTED EMISSION (150KHZ-30MHZ) ....................................................... 5 4. MEASUREMENT OF RADIATED EMISSION (30MHZ-1GHZ) ................................................................ 7 5. UNCERTAINTIES CHART .................................................................................................................... 11 6. ANNEX 1 (GRAPHS) ............................................................................................................................ 12

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 3 / 15 1. TEST PROGRAM Standard: - FCC Part 15, Subpart B (Digital Devices) - ANSI C63.4 (2003) EMISSION TEST LIMITS RESULTS (Comments) Limits for conducted disturbance at mains Quasi-peak Average COMPLY Frequency ports value (dBµV) value (dBµV) 150kHz-30MHz 150-500kHz 66 to 56 56 to 46 0.5-5MHz 56 46 5-30MHz 60 50 Radiated emissions Measure at 3m COMPLY 30MHz-1GHz* 30MHz-88MHz : 40 dBµV/m 88MHz-216MHz : 43.5 dBµV/m 216MHz-960MHz : 46.0 dBµV/m Above 960MHz : 54.0 dBµV/m *§15.33: The highest internal source of a testing device is defined like more the highest frequency generated or used in the testing device or on which the testing device works or agrees. - If the highest frequency of the internal sources of the testing device is lower than 108 MHz, measurement must be only performed until 1GHz. - If the highest frequency of the internal sources of the testing device ranges between 108 MHz and 500 MHz, measurement must be only performed until 2GHz. - If the highest frequency of the internal sources of the testing device ranges between 500 MHz and 1 GHz, measurement must be only performed until 5GHz. If the highest frequency of the internal sources of the testing device is above 1 GHz, measurement must be only performed until 5 times the highest frequency or 40 GHz, while taking smallest of both. Highest frequency: 58MHz (Declaration of provider)

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 4 / 15 2. APPARATUS UNDER TEST: CONFIGURATION 2.1. HARDWARE IDENTIFICATION (EUT AND AUXILIARIES): • Equipment under test (EUT): IUR250-01T1659A Serial Number: 11293IU00000518 FCCID: XKB-IUR250 • Option: - Motorised blocking of card, option installed in serial number tested. IUR250-01T1659A can be provided with or without this option. • Power supply: - USB - Rating: 5VDC - Frequency: DC • Inputs/outputs: - 1 x USB port - 1 x SMART CARD - 1 x Earth - 1 x RJ11, not used, maintenance only, not tested. • Cables: - 1 x USB shielded cable - 1 x plait of mass • Auxiliaries equipment used during test: - 1 x IUP250-01T1760A - SN: 11293IU00000311 - 1 x laptop TOSHIBA SATELITE S1410-704 (PS141E-04YCM-3V), sn: 13594938G 2.2. RUNNING MODE The EUT exercise program used during testing was exercised the EUT in a manner similar to a typical use. Test is done in loop we check that the number of tested loop is continuously increasing and that no error is reported on the screen of the IUP250 for conducted emission test. For radiated emission test we used the laptop and we check that the IUR is well functioning before and after measures. 2.3. EQUIPMENT MODIFICATIONS None 2.4. SPECIAL ACCESSORIES None

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 5 / 15 3. MEASUREMENT OF CONDUCTED EMISSION (150KHZ-30MHZ) 3.1. TEST CONDITIONS st Date of test : November 21 , 2011 Test performed by : A. MERLIN / N. BILLAUD Atmospheric pressure : 992hPa Relative humidity : 29% Ambient temperature : 25.0°C 3.2. SETUP FOR CONDUCTED EMISSIONS MEASUREMENT The product has been tested according to ANSI C63.4-(2003) and FCC Part 15 subpart B. The product has been tested with 110V/60Hz power line voltage and compared to the FCC Part 15 subpart B §15.107 limits. Measurement bandwidth was 9kHz from 150 kHz to 30 MHz. The EUT with its auxiliaries are set on a non-conducting table 80cm above the ground reference plane. The distance between the EUT and the LISN is 80cm. The EUT is 40cm away for the vertical ground plane. The EUT is powered through a LISN (measure). Auxiliaries are powered by another LISN. Measurement is made with a Rohde & Schwarz ESU8 receiver in peak mode. This was followed by a Quasi-Peak, i.e. CISPR measurement for any strong signal. If the average limit is met when using a Quasi-Peak detector, the EUT shall be deemed to meet both limits and measurement with the average detector is unnecessary. The LISN (measure and auxiliaries) is 50Ω / 50µH. The Peak data are shown on plots in annex 1. Quasi-Peak and Average measurements are detailed in a table with frequencies and levels measured. Interconnecting cables and equipment's were moved to position that maximized emission. A summary of the worst case emissions found in all test configurations and modes is shown on the following page.

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 6 / 15 3.3. TEST EQUIPMENT LIST DESCRIPTION MANUFACTURER MODEL N° LCIE Receiver 20Hz – 8GHz ROHDE & SCHWARZ ESU8 A2642019 Transient limiter HEWLETT PACKARD 11947A A4049061 Cable - - A5329197 LISN EMCO 3825/2 C2320068 3.4. DIVERGENCE, ADDITION OR SUPPRESSION ON THE TEST SPECIFICATION None 3.5. MEASUREMENTS RESULTS Mains terminals 110Vac/60Hz: Measurements are performed on the phase (L1) and neutral (N) of the power line of the IUP250. Measure on L1: graph Emc#1 (see annex 1) Measure on N: graph Emc#2 (see annex 1) RESULT: PASS

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 7 / 15 4. MEASUREMENT OF RADIATED EMISSION (30MHZ-1GHZ) 4.1. TEST CONDITIONS th Date of test : November 29 , 2011 Test performed by : A. MERLIN / N. BILLAUD Atmospheric pressure : 999hPa Relative humidity : 29% Ambient temperature : 22.0°C 4.2. SETUP FOR RADIATED EMISSIONS MEASUREMENT The installation of EUT is identical for pre-characterization measures in a 3 meters semi-anechoic chamber and for measures on the 10 meters Open site. The EUT and auxiliaries are set on the non-conducting table of 80 cm height. The EUT is powered by 230Vac/50Hz (PC and auxiliaries) Pre-characterisation measurement: A pre-scan of all the setup has been performed in a 3 meters semi-anechoic chamber. The distance between EUT and antenna is 3 meters. Test is performed in horizontal (H) and vertical (V) polarization. During the measurement, the EUT is rotated on a 360° range. The pre-characterization graphs are obtained in PEAK detection. For frequency band 1GHz to 12.5GHz, a search is performed in the semi-anechoic chamber in order to determine frequencies radiated by the EUT (Measuring distance reduced to 1m). Characterization on 10 meters open site from 30MHz to 1GHz: The product has been tested according to ANSI C63.4 (2003), FCC part 15 subpart B. Radiated Emissions were measured on an open area test site. A description of the facility is on file with the FCC. The product has been tested at a distance of 10 meters (30MHz to 1GHz) from the antenna and corrected according to requirements of 15.109.e). Results are compared to the FCC part 15 subpart B §15.109 limits. Measurement bandwidth was 120kHz from 30 MHz to 1GHz. Antenna height search was performed from 1m to 4m for both horizontal and vertical polarization. Continuous linear turntable azimuth search was performed with 360 degrees range.

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 8 / 15 Radiated emission test setup

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 9 / 15 4.3. TEST EQUIPMENT LIST DESCRIPTION MANUFACTURER MODEL N° LCIE Receiver 20Hz – 8GHz ROHDE & SCHWARZ ESU8 A2642019 Radiated emission comb generator BARDET - A3169050 Cable - - A5329183 Cable UTIFLEX - A5329189 Semi-Anechoic chamber #1 SIEPEL - D3044016 Antenna Bi-log CHASE CBL6111A C2040172 Cable N/N - - A5329038 Cable N/N - - A5329206 Semi-Anechoic chamber #3 SIEPEL - D3044017 Antenna Bi-log CHASE CBL6111A C2040051 Cable SUCOFLEX 106G A5329061 Cable OATS (Mast at 10m) UTIFLEX - A5329188 Cable OATS (Mast at 10m) UTIFLEX - A5329199 OATS - - F2000409 Turntable / Mast controller (OATS) ETS Lindgren Model 2066 F2000372 Antenna mast (OATS) ETS Lindgren 2071-2 F2000392 Turntable (OATS) ETS Lindgren Model 2187 F2000403 4.4. DIVERGENCE, ADDITION OR SUPPRESSION ON THE TEST SPECIFICATION None 4.5. MEASUREMENTS RESULTS Pre-characterisation measurement: pre-scan measurement at 3m (PEAK detection, graph examples) Polarisation H: graph Emr#1 (see annex 1) Polarisation V: graph Emr#2 (see annex 1) QUALIFICATION: 10 meters measurement on the Open Area Test Site. Frequency list has been created with semi-anechoic chamber pre-scan results. Measurements are performed using a QUASI-PEAK detection. Frequency range 30MHz to 1GHz: Measurements are performed using a QUASI-PEAK detection (RBW=120kHz) No Frequency Limit Measure Margin Angle Pol Ht Correc. Comments (MHz) Quasi-Peak Quasi-Peak (Mes-Lim) Table Ant. Ant. factor (dBµV/m) (dBµV/m) (dB) (deg) (cm) (dB) 1 44.280 40.0 27.6 -12.4 0 V 100 11.6 PASS 2 60.320 40.0 28.0 -12.0 180 V 200 6.5 PASS Note: Measures have been done at 10m distance and corrected according to requirements of 15.109.e) (M@3m = M@10m+10.5dB)

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 10 / 15 4.6. Field Strength Calculation The field strength is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain (if any) from the measured reading. The basic equation with a sample calculation is as follow: FS = RA + AF + CF – AG Where FS = Field Strength RA = Receiver Amplitude AF = Antenna Factor CF = Cable Factor AG = Amplifier Gain Assume a receiver reading of 52.5dBµV is obtained. The antenna factor of 7.4 and a cable factor of 1.1 is added. The amplifier gain of 29dB is subtracted, giving field strength of 32 dBµV/m. FS = 52.5 + 7.4 + 1.1 – 29 = 32 dBµV/m The 32 dBµV/m value can be mathematically converted to its corresponding level in µV/m. Level in µV/m = Common Antilogarithm [(32dBµV/m)/20] = 39.8 µV/m.

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 11 / 15 5. UNCERTAINTIES CHART Incertitude élargie Incertitude limite laboratoire / du CISPR / CISPR Type de mesure / Kind of measurement Wide uncertainty uncertainty limit ± laboratory y (k=2) ± x Mesure des perturbations conduites en tension sur le réseau d’énergie (monophasé) 3.57 dB 3.6 dB Measurement of conducted disturbances in voltage on the power port (single line) Mesure du champ électrique rayonné sur le site en espace libre de Moirans 5.07 dB 5.2 dB Measurement of radiated electric field on the Moirans open area test site Mesure du champ électrique rayonné IN SITU de 30 à 1000 MHz A l’étude / 5.2 dB IN SITU measurement of radiated electric field from 30 to 1000MHz Under consideration

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 12 / 15 6. ANNEX 1 (GRAPHS) CONDUCTED EMISSIONS Graph name : Emc#1 Test configuration: Limit : FCC PART15B Phase Class : B PARAMETERS Voltage / Frequency : 230VAC / 50Hz Legend: Line : Phase1 Peak Measure Average Measure RBW : 9kHz VBW : 30kHz QPeak Limit Average Limit Frequency : 150kHz- 30MHz Frequency Avg Lim Avg Avg-LimAvg QPeak LimQPeak QPeak-LimQPeak (MHz) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) 0.438 44.66 46.88 -2.21 49.71 56.88 -7.16 0.442 44.55 46.51 -1.96 49.98 56.51 -6.53 0.462 42.45 46.00 -3.55 48.87 56.00 -7.13 1.322 29.99 46.00 -16.01 36.25 56.00 -19.75 2.286 30.88 46.00 -15.12 35.99 56.00 -20.01 19.046 41.81 50.00 -8.19 42.06 60.00 -17.94

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 13 / 15 CONDUCTED EMISSIONS Graph name : Emc#2 Test configuration: Limit : FCC PART15B Neutral Class : B PARAMETERS Voltage / Frequency : 230VAC / 50Hz Legend: Line : Phase2 Peak Measure Average Measure RBW : 9kHz VBW : 30kHz QPeak Limit Average Limit Frequency : 150kHz- 30MHz Frequency Avg Lim Avg Avg-LimAvg QPeak LimQPeak QPeak-LimQPeak (MHz) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) (dBµV) 0.318 36.14 49.76 -13.62 44.38 59.76 -15.38 0.442 44.34 47.10 -2.76 49.67 57.10 -7.43 0.498 41.61 46.03 -4.42 47.25 56.03 -8.78 1.370 32.27 46.00 -13.73 37.97 56.00 -18.03 2.346 31.77 46.00 -14.23 37.16 56.00 -18.84 19.046 42.30 50.00 -7.70 42.52 60.00 -17.48

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 14 / 15 RADIATED EMISSIONS Graph name : EMR#1 Test configuration: Limit : FCC Part15B Class : B PARAMETERS Antenna polarization: Horizontale Legend: Azimuth : 0° - 360° Peak Measure RBW : 100kHz VBW : 300kHz QPeak Limit@3m Frequency : 30MHz- 1.001GHz 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Frequency (MHz) Peak (dBµV/m) No frequency has been detected.

RAPPORT D'ESSAI / TEST REPORT N° 249971-R1-E Page : 15 / 15 RADIATED EMISSIONS Graph name : EMR#2 Test configuration: Limit : FCC Part15B Class : B PARAMETERS Antenna polarization: Verticale Legend: Azimuth : 0° - 360° Peak Measure RBW : 100kHz VBW : 300kHz QPeak Limit@3m Frequency : 30MHz- 1.001GHz 100 dBµV/m 0 30MHz 1.001GHz Fréquence (MHz) Frequency (MHz) Peak (dBµV/m) 43.80 27.18 44.96 27.57 45.56 27.41 60.32 22.27


Document Created: 2012-01-31 17:41:58
Document Modified: 2012-01-31 17:41:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC