Annex AB_SAR Test Report

FCC ID: X4GS00947

RF Exposure Info

Download: PDF
FCCID_2992355

RSS-102 Annex A (NOTE: Annex A & B are Required When SAR or RF Evaluation Measurements are Applicable) All Fields must be completed with the requested information or the following codes: N/A for Not Applicable, N/P for Not Performed or N/V for Not Available. Where applicable, check appropriate box. 1. COMPANY NUMBER: 8803A 2. MODEL NUMBER: T00064 3. IC CERTIFICATION NUMBER: S00947 4. APPLICANT: Taser International 5. SAR/RF EXPOSURE TEST LABORATORY: RF Exposure Lab - 11292A 6. TYPE OF EVALUATION (Complete the applicable sections): (a) SAR Evaluation: Device Used in the Vicinity of the Human Head; (b) SAR Evaluation: Body-Worn Device; (c) SAR Evaluation: Limb-Worn Device; (d) RF Evaluation Note: The worst-case scenario (i.e. highest measured value obtained) should be reported. (a) SAR Evaluation: Device used in the Vicinity of the Human Head • Multiple transmitters: -Yes -No • Evaluated against exposure limits: -General Public Use -Controlled Use • Duty cycle used in evaluation: % • Standard used for evaluation (i.e. IEEE 1528, KDB 447498): • SAR value: W/kg. -Measured -Computed -Calculated (b) SAR Evaluation: Body-Worn Device and Body-Supported Device • Multiple transmitters: -Yes -No • Evaluated against exposure limits: -General Public Use -Controlled Use • Duty cycle used in evaluation: 100% • Standard used for evaluation (i.e. IEC 62209-2): IEC 62209-2, IEEE 1528, RSS-102, Safety Code 6 • SAR value: 0.94W/kg. -Measured -Computed -Calculated (c) SAR Evaluation: Limb-Worn Device • Multiple transmitters: -Yes -No • Evaluated against exposure limits: -General Public Use -Controlled Use • Duty cycle used in evaluation: % • Standard used for evaluation (i.e. IEC 62209-2): • SAR value: W/kg. -Measured -Computed -Calculated (d) RF Exposure Evaluation • Evaluated against exposure limits: -General Public Use -Controlled Use • Duty cycle used in evaluation: % • Standard used for evaluation (i.e. IEEE C95.3): • Measurement Distance: m • RF value: -V/m -A/m -W/m2 (Note: 10 W/m2 = 1 mW/cm2) -Measured -Computed -Calculated 033015-24a

RSS-102 Annex B (NOTE: Annex A & B are Required When SAR or RF Evaluation Measurements are Applicable) ATTESTATION: I attest: a) that the information provided in Annex A is correct; b) that the device evaluation was performed or supervised by me; c) that applicable measurement methods and evaluation methodologies have been followed; d) and that the device meets the SAR and/or RF exposure limits of RSS-102. Signature: Date: Movember 10, 2015 NAME (Please print or type): Jay Moulton TITLE (Please print or type): Vice President COMPANY (Please print or type): RF Exposure Lab - 11292A MODEL NUMBER: 74001 (Axon Body 2) IC CERTIFICATION NUMBER: 8803A-S00947 Note 1: To obtain approval under this standard, the above-mentioned application for certification shall be accompanied by the duly completed RF technical brief cover sheet (see Annex A) and a properly signed declaration of compliance (see Annex B). However, if the device in question meets the exemption from routine evaluation limits of sections 2.5.1 or 2.5.2, only a signed declaration of compliance needs to be submitted (see Annex C). Note 2: In addition, submission of the RF exposure technical brief is now required for certification. It shall be accompanied by the completed RF technical brief cover sheet (Annex A+B or C). Note 3: In cases of exemption according to RSS-102, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. or output power was derived (Annex C). 033015-24a


Document Created: 2016-02-03 11:17:30
Document Modified: 2016-02-03 11:17:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC