Test Report

FCC ID: WWLAMV200

Test Report

Download: PDF
FCCID_1035441

                       Shenzhen Certification Technologh Service Co., Ltd
                       3F, Bldg27,Area A, Tanglang Industrial Zone, Xili Town, Nanshan
                       District, ShenZhen, Guang dong, P.R. China.




                                  TEST REPORT
                                    FCC ID: WWLAMV200

Applicant           : Atake Digital Technology ShenZhen Co.,Ltd
Address             : 13th Building,The 4 th Industry park,Han Shui ko,kong Ming
                      Town,ShenZhen City


Fundamental Frequency : 27.045MHz
Equipment under Test (EUT):
     Name        : 27MHZ Wireless Optical Mouse
     Model              : AMV200,AMU200,AMU300,AMV300
Standards               : FCC PART 15, SUBPART C : 2008 (Section 15.227)

Report No.             : STE081113554
Date of Test           : November 15, 2008
Date of Issue          : November 15, 2008

Test Result :            PASS *
* In the configuration tested, the EUT complied with the standards specified above
Authorized Signature




   (Mark Zhu)
General Manager

The manufacture should ensure that all the products in series production are in conformity with the product
sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the
manufacturer must ensure the new system complies with all relevant standards. Any mention of ShenZhen
Certification Technology Service Co., Ltd. Or test done by ShenZhen Certification Technology Service Co.,
Ltd. Approvals in connection with, distribution or use of the product described in this report must be
approved by ShenZhen Certification Technology Service Co., Ltd. Approvals in writing.




FCC ID: WWLAMV200                                                                         Page 1 of 17


                                                                                          Report No.:STE081113554



                                          TABLE OF CONTENT

Description                                                                                                                  Page
1.      GENERAL INFORMATION ........................................................................................3
     1.1 DESCRIPTION OF DEVICE (EUT) ..................................................................................3
     1.2 DESCRIPTION OF TEST FACILITY ..................................................................................3
2.      SUMMARY OF MEASUREMENT...............................................................................4

3       E.U.T. OPERATION....................................................................................................5

4       LIST OF TEST AND MEASUREMENT INSTRUMENTS............................................5

5       RADIATION EMISSION TEST....................................................................................6
     5.1   TEST LIMITS ..............................................................................................................6
     5.2   TEST SETUP ...............................................................................................................6
     5.3   TEST PROCEDURE: ....................................................................................................7
     5.4   TEST RESULTS ..........................................................................................................8
6       20DB BANDWIDTH TEST........................................................................................10
     6.1   TEST REQUIREMENT ..................................................................................................10
     6.2   TEST METHOD ..........................................................................................................10
     6.3   TEST SETUP .............................................................................................................10
     6.4   TEST RESULT ...........................................................................................................10
7       ANTENNA REQUIREMENT .....................................................................................11
     7.1 STANDARD REQUIREMENT ........................................................................................11
     7.2 RESULT...................................................................................................................11
8       PHOTOGRAPHS OF TEST SETUP .........................................................................12

9       PHOTOGRAPHS OF EUT ........................................................................................13




FCC ID: WWLAMV200                                                                                               Page 2 of 17


                                                         Report No.:STE081113554


1. General Information
1.1Description of Device (EUT)

           Trade Name             : N/A
           EUT                    : 27MHZ Wireless Optical Mouse


           Model No.              : AMV200,AMU200,AMV300,AMU300
                                    It have similar schematic and PCB layout except for
           Model difference
                                    appearance colors and shape.


           Type of Antenna        : Integral Antenna


           Operation Frequency    : 27.045MHz
           Modulation type         FSK


           Power Supply           : Battery operated DC 3V


           Applicant              : Atake Digital Technology ShenZhen Co.,Ltd
           Address                : 13th Building,The 4 th Industry park,Han Shui
                                    Ko,Kong Ming Town,ShenZhen City



           Manufacturer           : Atake Digital Technology ShenZhen Co.,Ltd
           Address                : 13th Building,The 4 th Industry park,Han Shui
                                    Ko,Kong Ming Town,ShenZhen City




1.2Description of Test Facility
          Site Description

          All tests were performed at:
          SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC
          Laboratory, No.198 Kezhu Road, Science Town Economic& Technology
          Development District Guangzhou, China 510663

FCC ID: WWLAMV200                                                       Page 3 of 17


                                                    Report No.:STE081113554



2. Summary of Measurement


                                                       Stanadard
              Test              Test Requirement                        Result
                                                       Paragraph
         Radiated Emission     FCC PART 15 : 2008     Section 15.227   compliance

          Bandwidth            FCC PART15:2008        Section 15.215   compliance

         Antenna Requirement   FCC PART 15 : 2008 Section 15.203 compliance




FCC ID: WWLAMV200                                                Page 4 of 17


                                                                 Report No.:STE081113554



3   E.U.T. Operation
               Operating Environment:
                                        Temperature:              24.0 °C
                                        Humidity:                  50 % RH
                                        Atmospheric Pressure:     1010 mbar
                EUT Operation:
                                        Continuous transmitting in maximum power mode.
4   List of Test and Measurement Instruments

           RE in Chamber
                                                                Inventory   Cal.Date Cal.Due date
    Item     Test Equipment       Manufacturer     Model No.
                                                                   No.    (dd-mm-yy) (dd-mm-yy)
           3m Semi-Anechoic
     1                          ETS-LINDGREN      N/A           SEL0017   16-06-2007   15-06-2009
           Chamber
     2     EMI Test Receiver    Rohde & Schwarz   ESIB26        SEL0023   12-12-2008   11-12-2009
     3     EMI Test software    AUDIX             E3            SEL0050   N/A          N/A
     4     Coaxial cable        SGS               N/A           SEL0028   18-06-2008   17-06-2009
           BiConiLog Antenna
     5                          ETS-LINDGREN      3142C         SEL0014   12-08-2008   11-08-2009
           (26-3000MHz)
           Pre-amplifier        Agilent
     6                                            8447D         SEL0053   18-06-2008   17-06-2009
           (0.1-1300MHz)        Technologies
           Double-ridged horn
     7                          ETS-LINDGREN      3117          SEL0005   12-08-2008   11-08-2009
           (1-18GHz)
           Horn Antenna
     8                          ETS-LINDGREN      3160          SEL0076   12-08-2008   11-08-2009
           (18-26GHz)
           Pre-amplifier                          AFS42-00101
     9                          Rohde & Schwarz                 SEL0081   18-06-2008   17-06-2009
           (1-18GHz)                              800-25-S-42
                                                AFS33-
           Pre-amplifier
    10                          Rohde & Schwarz 18002650-30- SEL0080      18-06-2008   17-06-2009
           (18-26GHz)
                                                8P-44
    11     Band filter          Amindeon          82346         SEL0094   18-06-2008   17-06-2009
    12     Active.Loop Antenna Beijing Daze       ZN30900A      SEL0097   15-06-2008   14-06-2009




FCC ID: WWLAMV200                                                               Page 5 of 17


                                Report No.:STE081113554


5     Radiation Emission Test

5.1     Test Limits




5.2     Test setup




      Below 30MHZ Test setup




FCC ID: WWLAMV200                           Page 6 of 17


                                                           Report No.:STE081113554




      Above 30MHZ Test Setup

5.3     Test Procedure:
      1. The EUT is placed on a turntable, which is 0.8m above ground plane.
      2. The turntable shall be rotated for 360 degrees to determine the position of
         maximum emission level.
      3. EUT is set 3m away from the receiving antenna, which is moved from 1m to 4m to
          find out the maximum emissions.
      4. Maximum procedure was performed on the six highest emissions to ensure EUT
         compliance.
      5. And also, each emission was to be maximized by changing the polarization of
          receiving antenna both horizontal and vertical.
      6. Repeat above procedures until the measurements for all frequencies are
      complete.
      7 The radiation measurements are performed in X, Y, Z axis positioning. Only the
         worst case is shown in the report.
      8. The EUT is pre-scan from 30MHz to 10th harmonics
      The field strength is calculated by adding the Antenna Factor, Cable Factor &
      Peramplifier . The basic equation with a sample calculation is as follows:
      Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Peramlifer
      Factor
      An initial pre-scan was performed in the 3m chamber using the spectrum analyzer in
      peak detection mode. Quasi-peak measurements were conducted based on the
      peak sweep graph. The EUT was measured by Bilog antenna with 2 orthogonal
      polarities.




FCC ID: WWLAMV200                                                        Page 7 of 17


                                                             Report No.:STE081113554
5.4     Test Results

 Frequency   Reading                                                               Antenna
    MHZ         QP      Factor Measurement data     Limit       Margin   Detector Polarity
   27.045     64.21      13.27       77.48            80         -2.52      AV        H
  27.045       69.54     13.27         82.81          100       -17.19     Peak         H
    30          5.81     21.8          27.61          40        -12.39      QP          H
 132.8199      13.32     15.56         28.88         43.5       -14.62      QP          H
  216.24       15.42     13.14         28.56          46        -17.44      QP          H
  266.68       11.74     15.47         27.21          46        -18.79      QP          H
 487.8399       7.91     21.74         29.65          46        -16.35      QP          H
 776.8999       7.7      26.11         33.81          46        -12.19      QP          H

   27.045        59      14.21         73.21          80        -6.79       AV          V
   27.045      63.38     14.21         77.59          100       -22.41     Peak         V
   43.58        23.2     12.51         35.71          40        -4.29       QP          V
    78.5       21.44     9.47          30.91          40        -9.09       QP          V
   134.76      11.43     15.46         26.89         43.5       -16.61      QP          V
   175.5        12.4     13.93         26.33         43.5       -17.17      QP          V
   297.72      12.04     16.3          28.34          46        -17.66      QP          V
   513.06      13.56     21.56         35.12          46        -10.88      QP          V
      ***       ***       ***           ***           ***         ***      ***         ***



Remark:
The test equipment RBW set 120KHZ,VBW 300KHZ
Fundamental frequency AV limit calculation:(section15.227)
limit=10000microvolts/meter=20log10000=80dBuV/m
Peak Limit=80+20=100 dBuV/m
Test distance at 3 meters from Antenna
*** means any other frequency at least have 20 dB Margin.
The new battery was used during test.




FCC ID: WWLAMV200                                                        Page 8 of 17


                                             Report No.:STE081113554
GRAPHS OF RADIATION TEST DATA




                     HORIZONTAL OF ANTENNA




                       VERTICAL OF ANTENNA




FCC ID: WWLAMV200                                        Page 9 of 17


                                                         Report No.:STE081113554
6 20dB Bandwidth Test
6.1 Test requirement
    Please see the section 15.215
6.2 Test method
     The bandwidth is measured at an amplitude level reduced 20dB from the reference
      level. The reference level is the level of the highest amplitude signal observed
      from the transmitter at the fundamental frequency. Once the reference level is
      established, the equipment is conditioned with typical modulating signal to
      produce the worst-case (i.e. the widest) bandwidth.
6.3 Test Setup
    Same as 5.2
6.4 Test result




Remark:The test equipment RBW set 10kHZ,VBW 10KHZ




FCC ID: WWLAMV200                                                       Page 10 of 17


                                                               Report No.:STE081113554
7    Antenna Requirement

7.1 Standard Requirement
An intentional radiator shall be designed to ensure that no antenna other than that
furnished by the responsible party shall be used with the device. The use of a
permanently attached antenna or of an antenna that uses a unique coupling to the
intentional radiator shall be considered sufficient to comply with the provisions of this
Section. The manufacturer may design the unit so that a broken antenna can be
replaced by the user, but the use of a standard antenna jack or electrical connector is
prohibited.

7.2 Result
The EUT antenna is integral Antenna.It comply with the standard requirement.




FCC ID: WWLAMV200                                                             Page 11 of 17


                                           Report No.:STE081113554
8 Photographs of Test Setup

   Photographs-Radiated Emission Test Setup in Chamber




FCC ID: WWLAMV200                                        Page 12 of 17


                       Report No.:STE081113554



9 Photographs of EUT


   Figure 1

   Photo of EUT

   Front View [ ]

   Rear View [ ]

   Top View [√]

   Bottom View[ ]

   Left View [ ]

   Right View [ ]

   Inside View [ ]




   Figure 2

   Photo of EUT

   Front View [ ]

   Rear View [ ]

   Top View [ ]

   Bottom View[√ ]

   Left View [ ]

   Right View [ ]

   Inside View [ ]




FCC ID: WWLAMV200                  Page 13 of 17


                     Report No.:STE081113554
   Figure 3

   Photo of EUT

   Front View [ ]

   Rear View [ ]

   Top View [√]

   Bottom View[ ]

   Left View [ ]

   Right View [ ]

   Inside View [ ]




   Figure 4

   Photo of EUT

   Front View [ ]

   Rear View [ ]

   Top View [ ]

   Bottom View[ √]

   Left View [ ]

   Right View [ ]

   Inside View [ ]




FCC ID: WWLAMV200                Page 14 of 17


                     Report No.:STE081113554

   Figure 5

   Photo of EUT

   Front View [ ]

   Rear View [ ]

   Top View [√]

   Bottom View[ ]

   Left View [ ]

   Right View [ ]

   Inside View [ ]




   Figure 6

   Photo of EUT

   Front View [ ]

   Rear View [ ]

   Top View [ ]

   Bottom View[√]

   Left View [ ]

   Right View [ ]

   Inside View [ ]




FCC ID: WWLAMV200                Page 15 of 17


                     Report No.:STE081113554

   Figure 7

   Photo of EUT

   Front View [ ]

   Rear View [ ]

   Top View [ √]

   Bottom View[ ]

   Left View [ ]

   Right View [ ]

   Inside View [ ]




   Figure 8

   Photo of EUT

   Front View [ ]

   Rear View [ ]

   Top View [ ]

   Bottom View[√]

   Left View [ ]

   Right View [ ]

   Inside View [ ]




FCC ID: WWLAMV200                Page 16 of 17


                                                      Report No.:STE081113554

   Figure 9

   Photo of EUT

   Front View [ ]

   Rear View [ ]

   Top View [ ]

   Bottom View[ ]

   Left View [ ]

   Right View [ ]

   Inside View [√ ]




   Figure 10

   Photo of EUT

   Front View [ ]

   Rear View [ ]

   Top View [ ]

   Bottom View[ ]

   Left View [ ]

   Right View [ ]

   Inside View [√ ]




                      ---------END OF THE REPORT--------




FCC ID: WWLAMV200                                                 Page 17 of 17



Document Created: 2008-11-21 09:27:51
Document Modified: 2008-11-21 09:27:51

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC