Test Report

FCC ID: WQJ-VP6800

Test Report

Download: PDF
FCCID_4260560

EMC TEST REPORT Applicant ID TECH FCC ID WQJ-VP6800 Product VP6800 Brand ViVOpay Model IDV68-11111D, IDV68-11111 Report No. R1903A0103-E1V1 Issue Date April 24, 2019 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC Code CFR47 Part15B (2018)/ ANSI C63.4 (2014). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Wei Liu/ Manager Approved by: Guangchang Fan/ Director TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000

FCC EMC Test Report Report No: R1903A0103-E1V1 Table of Contents 1 Test Laboratory............................................................................................................................... 4 1.1 Notes of the Test Report ......................................................................................................... 4 1.2 Test facility .............................................................................................................................. 4 1.3 Testing Location ...................................................................................................................... 5 2 General Description of Equipment under Test ................................................................................ 6 2.1 Client Information .................................................................................................................... 6 2.2 General information ................................................................................................................. 6 2.3 Applied Standards ................................................................................................................... 7 2.4 Test Mode................................................................................................................................ 8 3 Test Case Results .......................................................................................................................... 9 3.1 Radiated Emission .................................................................................................................. 9 3.2 Conducted Emission ............................................................................................................. 14 4 Main Test Instrument .................................................................................................................... 17 ANNEX A： The EUT Appearance and Test Configuration................................................................. 18 A.1 EUT Appearance ....................................................................................................................... 18 A.2 Test Setup.................................................................................................................................. 20 TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 2 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 Summary of measurement results Number Test Case Clause in FCC Rules Conclusion 1 Radiated Emission FCC Part15.109, ANSI C63.4-2014 PASS 2 Conducted Emission FCC Part15.107, ANSI C63.4-2014 PASS Test Date: March 12, 2019 ~ March 29, 2019 TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 3 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test facility CNAS (accreditation number: L2264) TA Technology (Shanghai) Co., Ltd. has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS). FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. IC (recognition number is 8510A) TA Technology (Shanghai) Co., Ltd. has been listed by industry Canada to perform electromagnetic emission measurement. VCCI (recognition number is C-4595, T-2154, R-4113, G-10766) TA Technology (Shanghai) Co., Ltd. has been listed by industry Japan to perform electromagnetic emission measurement. A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 4 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: xukai@ta-shanghai.com TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 5 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 2 General Description of Equipment under Test 2.1 Client Information Applicant ID TECH Applicant address 10721 Walker Street, Cypress, California 90630 Manufacturer ID TECH Manufacturer address 10721 Walker Street Cypress, CA 90630, Cypress, CA / United States 2.2 General information EUT Description Device Type: Movable Device Model: IDV68-11111D, IDV68-11111 SN: 910T553855 HW Version: Rev.A SW Version: v1.00 Antenna Type: Internal Antenna Band Tx (MHz) Rx (MHz) Bluetooth: 2402 ~ 2480 2402 ~ 2480 Frequency: WIFI 2.4G: 2412 ~ 2462 2412 ~ 2462 NFC 13.56 13.56 Bluetooth: GFSK, π/4-DQPSK, 8-DPSK Bluetooth v4.2 LE: GFSK Modulation: WLAN 802.11b: DSSS WLAN 802.11g/n: OFDM NFC: ASK EUT Accessory Manufacturer: ID TECH Cable Model: 80159217-001 Auxiliary test equipment PC Manufacturer: Dell PC Model: E5450 (SN : P48G001) Note: The information of the EUT is declared by the manufacturer. TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 6 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 2.3 Applied Standards According to the specifications of the manufacturer, it must comply with the requirements of the following standards: Test standards FCC Code CFR47 Part15B (2018) ANSI C63.4 (2014) TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 7 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 2.4 Test Mode Test Mode Mode 1 Adapter + EUT +Idle Mode 2 Adapter + EUT with PC + +Idle TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 8 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 3 Test Case Results 3.1 Radiated Emission Ambient condition Temperature Relative humidity Pressure 24°C~26°C 45%~50% 102.5kPa Methods of Measurement The EUT is placed on a non-metallic table 0.8m above the horizontal metal reference ground plane. The distance between EUT and receive antenna should be 3 meters. During the test, the EUT was operating in its typical mode. The test method is according to ANSI C63.4-2014. Sweep the whole frequency band through the range from 30MHz to the 5th harmonic of the carrier. During the test, the height of receive antenna shall be moved from 1 to 4 meters, and the antenna shall be performed under horizontal and vertical polarization. The turn table shall be rotated from 0 to 360 degrees for detecting the maximum of radiated signal level. The data of cable loss and antenna factor has been calibrated in full testing frequency range before the testing. During the test, the EUT is worked at maximum output power. Set the spectrum analyzer in the following: Below 1GHz: RBW=100 kHz / VBW=300 kHz / Sweep=AUTO Above 1GHz: (a) PEAK: RBW=1MHz / VBW=3MHz/ Sweep=AUTO (b) AVERAGE: RBW=1MHz / VBW=1Hz / Sweep=AUTO The radiated emission was measured in the following position: EUT stand-up position (Z axis), lie-down position (X, Y axis). The worst emission was found in lie-down position (X axis) and the worst case was recorded. TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 9 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 Test Setup Below 1GHz Above 1GHz Note: Area side:2.4mX3.6m Antenna Tower meets ANSI C63.4 requirements for measurements above 1 GHz by keeping the antenna aimed at the EUT during the antenna’s ascent/ descent along the antenna mast. TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 10 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 Limits Frequency Field Strength Detector (MHz) (dBμV/m) 30 -88 40.0 Quasi-peak 88-216 43.5 Quasi-peak 216 – 960 46.0 Quasi-peak 960-1000 54.0 Quasi-peak 1000-5th harmonic of the highest 54 Average frequency or 40GHz,which is lower 74 Peak Measurement Uncertainty The assessed measurement uncertainty to ensure 95% confidence level for the normal distribution is with the coverage factor k = 1.96. Frequency Uncertainty 30MHz~200MHz 4.02 dB 200MHz~1000MHz 3.28 dB 1GHz~18GHz 3.70 dB 18GHz~26.5GHz 5.78 dB 26.5GHz~40GHz 5.82 dB TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 11 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 Test Results Sweep the whole frequency band through the range from 30MHz to the 5th harmonic of the carrier, the Emissions in the frequency band 18GHz- 26.5GHz is more than 20dB below the limit are not reported. The following graphs display the maximum values of horizontal and vertical by software. For above 1GHz, Blue trace uses the peak detection, Green trace uses the average detection. RE 0.03-1GHz QP Class B 80 70 60 FCC RE QP 50 Level in dBμV/ 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Radiated Emission from 30MHz to 1GHz Frequency Quasi-Peak Height Azimuth Correct Margin Limit Polarization (MHz) (dBuV/m) (cm) (deg) Factor (dB) (dB) (dBuV/m) 34.607500 34.9 100.0 V 106.0 16.3 5.1 40.0 39.452500 33.3 100.0 V 118.0 16.9 6.7 40.0 167.382500 30.9 100.0 H 237.0 10.3 12.6 43.5 186.007500 38.0 100.0 H 82.0 11.1 5.5 43.5 241.783750 38.8 100.0 H 278.0 13.6 7.2 46.0 671.938750 31.0 100.0 V 132.0 23.6 15.0 46.0 Remark: 1. Correction Factor = Antenna factor+ Insertion loss(cable loss+amplifier gain) 2. Margin = Limit – Quasi-Peak TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 12 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 FCC RE 1G-18GHz PK+AV Class B 110 100 80 FCC RE PK Level in dBμV/ 60 FCC RE AV 40 20 0 1G 2G 3G 4G 5G 6 8 10G 18G Frequency in Hz Radiated Emission from 1GHz to 18GHz Correct Peak Height Azimuth Margin Limit Frequency Polarization Factor (dBuV/m) (cm) (deg) (dB) (dBuV/m) (MHz) (dB) 1087.125000 44.5 100.0 H 7.0 -11.3 29.5 74 1187.000000 44.2 200.0 H 341.0 -11.0 29.8 74 2181.500000 39.8 200.0 H 126.0 -5.7 34.2 74 3233.375000 46.1 200.0 H 333.0 -3.3 27.9 74 6505.875000 49.3 100.0 V 207.0 5.4 24.7 74 10785.625000 54.8 100.0 H 132.0 13.0 19.2 74 Correct Frequency Average Height Azimuth Margin Limit Polarization Factor (MHz) (dBuV/m) (cm) (deg) (dB) (dBuV/m) (dB) 1087.125000 34.8 100.0 H 7.0 -11.3 19.2 54 1187.000000 35.0 200.0 H 341.0 -11.0 19.0 54 2179.375000 29.2 200.0 H 213.0 -5.7 24.8 54 3233.375000 39.8 200.0 H 333.0 -3.3 14.2 54 6554.750000 38.8 200.0 V 1.0 5.5 15.2 54 10866.375000 44.1 100.0 V 131.0 13.1 9.9 54 TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 13 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 3.2 Conducted Emission Ambient condition Temperature Relative humidity Pressure 24°C ~26°C 50%~55% 102.5kPa Methods of Measurement The EUT is placed on a non-metallic table of 80cm height above the horizontal metal reference ground plane. During the test, the EUT was operating in its typical mode. The test method is according to ANSI C63.4-2014. Connect the AC power line of the EUT to the L.I.S.N. Use EMI receiver to detect the average and Quasi-peak value. RBW is set to 9 kHz, VBW is set to 30kHz. The measurement result should include both L line and N line. During the test, EUT is connected to a laptop via a USB cable in the case of Transfer Data mode. The EUT is used as the peripheral equipment of the PC. The data is transferred from EUT to PC; PC is connected to server via a long LAN cable. Test Setup Note: Power Supply is AC Power source and it is used to change the voltage 120V/60Hz. Limits Frequency Conducted Limits(dBμV) (MHz) Quasi-peak Average * * 0.15 - 0.5 66 to 56 56 to 46 0.5 - 5 56 46 5 - 30 60 50 *: Decreases with the logarithm of the frequency. Measurement Uncertainty The assessed measurement uncertainty to ensure 95% confidence level for the normal distribution is with the coverage factor k = 1.96. U= 2.57 dB. TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 14 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 Test Results Following plots, Blue trace uses the peak detection; Green trace uses the average detection. Meas. Frequency QuasiPeak Average Limit Margin Bandwidth Corr. Time Line Filter (MHz) (dBµV) (dBµV) (dBµV) (dB) (kHz) (dB) (ms) 0.35 --- 23.89 49.06 25.17 1000.0 9.000 L1 ON 19.18 0.36 33.44 --- 58.75 25.31 1000.0 9.000 L1 ON 19.18 0.40 35.56 --- 57.95 22.39 1000.0 9.000 L1 ON 19.23 0.40 --- 27.79 47.86 20.07 1000.0 9.000 L1 ON 19.23 1.13 --- 19.76 46.00 26.24 1000.0 9.000 L1 ON 19.24 1.81 25.29 --- 56.00 30.71 1000.0 9.000 L1 ON 19.17 3.49 23.24 --- 56.00 32.76 1000.0 9.000 L1 ON 19.05 4.82 --- 18.77 46.00 27.23 1000.0 9.000 L1 ON 19.07 6.28 27.18 --- 60.00 32.82 1000.0 9.000 L1 ON 19.13 6.37 --- 20.71 50.00 29.29 1000.0 9.000 L1 ON 19.13 18.25 --- 26.02 50.00 23.98 1000.0 9.000 L1 ON 19.53 18.25 27.48 --- 60.00 32.52 1000.0 9.000 L1 ON 19.53 L line Conducted Emission from 150 KHz to 30 MHz TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 15 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 Meas. Frequency QuasiPeak Average Limit Margin Bandwidth Corr. Time Line Filter (MHz) (dBµV) (dBµV) (dBµV) (dB) (kHz) (dB) (ms) 0.36 --- 17.09 48.75 31.66 1000.0 9.000 N ON 19.18 0.36 24.17 --- 58.75 34.58 1000.0 9.000 N ON 19.18 0.59 25.59 --- 56.00 30.41 1000.0 9.000 N ON 19.26 0.83 --- 20.62 46.00 25.38 1000.0 9.000 N ON 19.24 1.04 --- 15.45 46.00 30.55 1000.0 9.000 N ON 19.24 1.79 25.13 --- 56.00 30.87 1000.0 9.000 N ON 19.17 3.56 25.47 --- 56.00 30.53 1000.0 9.000 N ON 19.06 4.99 --- 17.62 46.00 28.38 1000.0 9.000 N ON 19.08 6.48 30.02 --- 60.00 29.98 1000.0 9.000 N ON 19.13 11.89 --- 21.21 50.00 28.79 1000.0 9.000 N ON 19.38 13.42 27.73 --- 60.00 32.27 1000.0 9.000 N ON 19.46 18.25 --- 25.87 50.00 24.13 1000.0 9.000 N ON 19.40 N line Conducted Emission from 150 KHz to 30 MHz TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 16 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 4 Main Test Instrument Serial Calibration Expiration Name Manufacturer Type Number Date Time Spectrum 15195-01- R&S FSV40 2018-05-20 2019-05-19 Analyzer 00 EMI Test R&S ESCI 100948 2018-05-20 2019-05-19 Receiver Trilog Antenna SCHWARZBECK VULB 9163 9163-201 2017-11-18 2019-11-17 Horn Antenna R&S HF907 100126 2018-07-07 2020-07-06 Standard Gain ETS-Lindgren 3160-09 00102643 2018-06-20 2019-06-19 Horn EMI Test R&S ESR 101667 2018-05-20 2019-05-19 Receiver LISN R&S ENV216 101171 2016-12-16 2019-12-15 Bore Sight ETS 2171B 00058752 / / Antenna mast Test software EMC32 R&S 9.26.0 / / *****END OF REPORT ***** TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 17 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 ANNEX A： The EUT Appearance and Test Configuration A.1 EUT Appearance a: EUT TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 18 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 b: Cable Picture 1 EUT and Accessory TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 19 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 A.2 Test Setup Below 1GHz Above 1GHz Picture 2 Radiated Emission Test Setup TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 20 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

FCC EMC Test Report Report No: R1903A0103-E1V1 Picture 3 Conducted Emission Test Setup TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 21 of 21 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.


Document Created: 2019-05-01 06:17:35
Document Modified: 2019-05-01 06:17:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC