user manual

FCC ID: WNG-UNCG-31

Users Manual

Download: PDF
FCCID_4247697

Setup • Ignore battery optimizations (only for Android) – pressing “YES” Step 1. Connect the CarePort (tower unit) (figure 3) or “ALLOW” (figure 4) – (different type of mobiles may • To power ON, connect AC adapter to port (5VDC input) at the back show different notification) of the tower unit, and plug-in the AC adapter to an AC Mains power outlet. • Use the provided Ethernet cable to connect port (LAN connection) at the back of tower unit, and plug into your router. • The green LED will stay ON (wait about 50 seconds with a long “Beep” is heard) when a network connection has been established OR (figure 3) (figure 4) CarePort with iFall • Allow access to the phone’s camera for scanning the QR code on the UNCG-31 devices to be paired with your phone (only for Android) Revised on 19/02/2019 Step 3. Register Devices (on “Register” tab) • Enable “Push” to allow the app receive push notifications (iOS) (figure 5 for Android and figure 6 for iPhone) • Input a User name • Click “QR Login” Step 2. Download the app “iFall Rondish” from Google Play or “iFall App” from App Store • Launch “iFall” app - figure 1 for Android - figure 2 for iPhone (direct access to Current Alarm page with bottom shown “Event”, “List” and “Register”) Manufactured by Rondish Company Limited Unit G&H, 4/F, Block 1, Kwai Tak Ind. Ctr., 15-33 Kwai Tak Street, Kwai Chung, N.T. (figure 5) (figure 6) Hong Kong • Allow iFall to take pictures by pressing “ALLOW” (for iPhone only) • Scan the QR code at the back of Unit to pair the unit with your smartphone (figure 7) – CarePort should be the 1st Device to scan. • Confirm “Login Success” by pressing “OK” (figure 1) (figure 2) (figure 7) • Press “Add Device” button to scan the unique QR code on any device (e.g. pendant) you want to add into memory • Confirm “Add Device success” by pressing “Click”

Step 4. Review Device List (on “Device” tab for Android and “List” tab on Step 6. Wi-Fi Setup (optional) LED Indications iPhone) • Complete steps 1-3 above • Shows status of all paired devices (figure 8) • Go into “Device List” in the Android App (or “Your Devices” in Events Description o Blue – CarePort is online iPhone App), and hold the CarePort icon. Following “Edit CarePort” WiFi connection Operation Mode: o Green – device is ready to use section above, enter the Wi-Fi SSID password. When the CarePort successfully connects to a o Grey – device is disabled / offline • Press “Save” to confirm the information WiFi router the WiFi LED will flash when any o Black – device is lost • Ensure the CarePort is connected to your Wi-Fi router with an acitivity happens. If not, this LED will be off o Battery icon – battery condition Ethernet cable o Sound icon – audible/mute • Power on the CarePort or press button on the bottom Setup Mode: • Edit device by pressing and holding – allows user to choose how • Unplug the Ethernet cable and reset the CarePort It will turn on the WiFi LED, and flashing if any the device will display: (figure 9) activity happened o 1st line – Device name; e.g. “Dad’s Chair” or “Mom’s Pendant” FAQ/Support Ethernet Plug in the ethernet cable – if it links up with the connection router, it turns on the Orange LED on the o 2nd line – Device location; e.g. “Common Area” or “Bed Q. How far away can the bed sensor or pendant be from the CarePort and still ethernet socket; if it connected and receives a Room” receive the alarm? valid IP, it then starts flashing the Green-LED • Alarm sound (On/Off) – Choose audible or silent alert A. Wireless devices will have 20~25m indoor range, depending on the shape when activity happens • Enable (On/Off) – Can enable or disable device • Confirm “Edit success” by pressing “Click” and construction of your home. Unplug the ethernet connector, both LEDs will • Automatically go back to “Device List” turn off Q. If I can’t get enough range, is there a way to extend it? A. Installing an indicator light can extend the range from a wireless device to Lost Internet The CarePort will beep and flash the Connection- the CarePort. connection LED every half second for 3s CarePort not It activates the beep sound for 3 seconds, and For additional product information, scan the QR code below. Rondish will post registered flashes the Connection-LED 2 times and gaps for information to our website to help address Frequently Asked Questions and 2 seconds and then repeat these activities again, technical support. and so on Connected to Connection-LED will stay steady on server No field device Device-LED will flash every half second registered Field device Device-LED will stay steady on registered System ready Connection & Device-LEDs both steady on (figure 8) (figure 9) Warnings Compatible Devices This device is not suitable for all individuals. Other devices may be Step 5. Device operation (on “Home” tab for Android and “Event” tab on iPhone) required. This device is not a substitute for visual monitoring by a Order Reference Device Description • Press button on pendant, or caregiver. The manufacturer does not claim that this device will stop TXP-11 Panic button with lanyard and man-down alert. • Release bed pad pressure; elopement and/or stop falls. Test regularly to ensure alarms are working This will activate a CALL to the paired properly. smartphone when pressed by the user, or • Active alarms will be shown in “Red” (figure 10) automatically trigger an alert in case of a patient • To respond to an “Alarm”, press and hold that “Alarm” This product using radio frequency signals, which can be affected by fall. o Press “Acknowledge” tab will silence the alarm sound, and the “Alarm” will be changed from “Red” to ”Green” building layout and construction materials. The manufacturer cannot WMBP-20 Wireless under-mattress sensorpad. This sensor (figure 11) guarantee the wireless range you get will match the estimates provided. should be installed beneath the resident’s You should test that there are no “dead areas” in your home where alarms mattress to monitor sleeping patterns. If the o Press “Dismiss” tab, the “Alarm” will remove from the list cannot be received. resident does not go to bed or wake up at a usual time, this will signal an alert on the caregiver’s smartphone. Specifications CCP-01 Wireless chair sensorpad. This sensor should be installed on or beneath the cushion on a chair in Operating Radio Wi-Fi: 2.4GHz the main living area to measure resident activity Frequency Receiver: 433MHz WCP-11 Wall-mounted call/reset button with pull cord. Power input 5VDC, 2.5A This provides an emergency call point for a bath Dimensions 75 x 80 x 163mm or shower area. Connection Ethernet, Wi-Fi ILB-11 Indication light box with signal forward. This Indications Ethernet LED – at rear side, on Ethernet unit can extend the range of your wireless connector devices to the CarePort. For greatest effect it Wi-Fi LED – top-front, orange, on the left should be mounted a central area. Connection LED – top-front, green, at center Device Connection LED – top-front, blue, on right (figure 10) (figure 11) OS Requirements Android 6.0 or later iOS 10.3 or later

FCC/CE Statement The antenna(s) used for this transmitter must not be co-located of operating in conjunction with any other antenna or transmitter. FCC Interference Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the Fcc radio This device complies with part 15 of the FCC Rules. frequency exposure limits, human proximity to the Operation is subject to the following two conditions: antenna shall not be less than 20cm (8inches) during (1) This device may not cause harmful interference, and normal operation. (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure statements Notice: This equipment complies with FCC radiation Any changes or modifications not expressly approved by the exposure requirement set forth for an party responsible for compliance could void your authority uncontrolled environment. End users must follow to operate the equipment. the specific operating instructions for satisfying NOTE: This equipment has been tested and found RF exposure compliance. to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the Operate Frequency Bands : 2.4G equipment off and on, the user is encouraged to Max. output power: 10mW try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. EU declaration of conformity - Increase the separation between the equipment Rondish Company Limited hereby declares that the and receiver. - Connect the equipment into an outlet on a circuit device is in compliance with the essential different from that to which the receiver is requirements and other relevant provisions of connected. directives 2014/53/EU, 2014/30/EU and - Consult the dealer or an experienced radio/ TV technician for help. 2014/35/EU.


Document Created: 2019-02-19 11:25:07
Document Modified: 2019-02-19 11:25:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC