WJ9-KSPHS8P

FCC ID

Equipment: GSM/GPRS/UMTS/HSPA Module

KATHREIN Sachsen GmbH -KSPHS8P

Lindenstrasse 3, Muehlau, N/A 09241 Germany

Application
Frequency Range
Final Action Date
Granted
QzdQUv2lAqqpaJAVNWbzfw==
824.2-848.8
2019-03-13
APPROVED
QzdQUv2lAqqpaJAVNWbzfw==
826.4-846.6
2019-03-13
APPROVED
QzdQUv2lAqqpaJAVNWbzfw==
1850.2-1909.8
2019-03-13
APPROVED
QzdQUv2lAqqpaJAVNWbzfw==
1852.4-1907.6
2019-03-13
APPROVED
Gm8MuooRxivRGYvlPZVeVQ==
-
2019-03-13
APPROVED
File NameDocument TypeDateDirect
Label infoID Label/Location Info 2019-03-13 00:00:00 pdf
External PhotosExternal Photos 2019-03-13 00:00:00 pdf
Change of ID Authorisation LetterCover Letter(s) 2019-03-13 00:00:00 pdf
Change of ID RequestCover Letter(s) 2019-03-13 00:00:00 pdf
Authorisation LetterCover Letter(s) 2019-03-13 00:00:00 pdf
Label InfoID Label/Location Info 2019-03-13 00:00:00 pdf

Application Details:

EquipmentGSM/GPRS/UMTS/HSPA Module
FRN0017985607
Grantee CodeWJ9
Product Code-KSPHS8P
Applicant BusinessKATHREIN Sachsen GmbH
Business AddressLindenstrasse 3 , Muehlau,N/A Germany 09241
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
TCB Email[email protected]
ApplicantJoerg Spranger – Engineer
Applicant Phone 125
Applicant Fax+49-3722 60734
Applicant Email[email protected]
Applicant MailStop
Test Firm7layers GmbH
Test Firm ContactBernhard Retka
Test Firm Phone
Test Firm Fax0049 2102 749 350
Test Firm Email[email protected]
Certified ByD Schlalda – MD
Comment [QzdQUv2lAqqpaJAVNWbzfw==]: Output power listed is peak conducted. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max antenna gain for this device as reported to the FCC is: 3.92 dBi (850MHz) and 2.5 dBi (1900MHz).

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC