FCC ID Label and Location

FCC ID: WDQ-FT1345

ID Label/Location Info

Download: PDF
FCCID_3036687

4 3 2 1 REVISIONS REV DESCRIPTION DATE APPROVED NOTES: (UNLESS OTHERWISE SPECIFIED) C RELEASE PER ECO 7774 AUG30.12 1 SECURE FOAM PAD (ITEM 8) OVER SWITCH TAB (PART OF ITEM 2) AS SHOWN IN DETAIL A. D PROD RELEASE PER ECO 11752 - ST MS 10/31/12 BN D 2 REMOVED. E F REVISED PER ECO 11796 - ST REVISED PER ECO 11842 KW KW 1/9/13 BN D 3 STRIP APPROXIMATELY .5[13] OF OUTER INSULATION FROM CABLE (ITEM6). STRIP .15 .03[3.8 .6] OF BOTH WIRES (PART OF ITEM 6). 4 INSERT CABLE THROUGH BOTTOM CASE. APPLY HEATSHRINK (ITEM 9) WHERE SHOWN. INSERT WIRES (PART OF ITEM 6) AS SHOWN AND TIGHTEN TERMINAL SCREWS (PART OF ITEM 1). PULL CABLE (ITEM 6) OUT OF CASE UNTIL STOPPED BY HEATSHRINK (ITEM 9),ENSURE HEATSHRINK SERVES AS A STRAIN RELIEF FOR CABLE. 2 (3) (6) 3 4 7 C 4 FCC/IC ID Label C TRANSPARENT 1 8 9 4 (2) 1 BLACK 5 B B BACK OF ITEM 3 3 4 DETAIL A 1 UNLESS OTHERWISE NOTED ALL PROJECT: DIMENSIONS ARE INCHES [MM]: TOLERANCES: DECIMALS ANGLES: ± 0.5° CAD OPERATOR: DATE .XX±.01 [.3] ROUNDNESS:±.005 [.13] .XXX±.005 [.13] FLATNESS: ±.005 [.13] Y.M.LIU DEC14.11 A MATERIAL: CONCENTRICITY:±.005 [.13] CHECKED: B. NYHUS DATE 10/31/2012 TITLE: A APPROVED: DATE ASSY,MECH,SW-ATT-TF APPROVED: DATE SIZE: DRAWING NO.: REV.: FINISH: C APPROVED: DATE 6 187-1431 F APPROVED: DATE SCALE: SHEET: DO NOT SCALE DRAWING NONE 1 OF 1 4 3 2 1


Document Created: 2016-06-15 14:10:20
Document Modified: 2016-06-15 14:10:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC