SAR annex E

FCC ID: VYTLP-8697N

Test Report

Download: PDF
FCCID_2700879

NCL CALIBRATION LABORATORIES Calibration File No.: PC-1608 Task No: ISL-PC-5784 C E R T I F I C A T E OF C A L I B R A T I O N It is certified that the equipment identified below has been calibrated in the NCL CALIBRATION LABORATORIES by qualified personnel following recognized procedures and using transfer standards traceable to NRC/NIST. Equipment: Miniature Isotropic RF Probe Record of Calibration Body Manufacturer: APREL Laboratories Model No.: E-020 Serial No.: 266 Calibration Procedure: D01-032-E020-V2, D22-012-Tissue, D28-002-Dipole Project No: BACL-5784 Calibrated: 12th January 2015 Released on: 15th January 2015

NCL Calibration Laboratories Division of APREL Inc. Introduction This Calibration Report reproduces the results of the calibration performed in line with the references listed below. Calibration is performed using accepted methodologies as per the references listed below. Probes are calibrated for air, and tissue and the values reported are the results from the physical quantification of the probe through meteorgical practices. Calibration Method Probes are calibrated using the following methods. <800 MHz TEM Cell for sensitivity in air Standard phantom using temperature transfer method for sensitivity in tissue >800 MHz Waveguide* method to determine sensitivity in air and tissue *Waveguide is numerically (simulation) assessed to determine the field distribution and power The boundary effect for the probe is assessed using a standard flat phantom where the probe output is compared against a numerically simulated series of data points References o IEEE Standard 1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques o EN 62209-1:2006 Human Exposure to RF Fields from hand-held and body-mounted wireless communication devices - Human models. instrumentation, and procedures - Part 1: Procedure to measure the Specific Absorption Rate (SAR) for hand-held mobile wireless devices o IEC 62209-2:2010 Human exposure to RF fields from hand-held and body-mounted wireless devices - Human models, instrumentation, and procedures - Part 2: specific absorption rate (SAR) for wireless communication devices (30 MHz - 6 GHz) o TP-D01-032-E020-V2 E-Field probe calibration procedure o D22-012-Tissue dielectric tissue calibration procedure o D28-002-Dipole procedure for validation of SAR system using a dipole o IEEE 1309 Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9kHz to 40GHz Page 2 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Inc. Conditions Probe SN 266 was a recalibration. Ambient Temperature of the Laboratory: 22 C +/- 1.5C Temperature of the Tissue: 21 C +/- 1.5C Relative Humidity: < 60% Primary Measurement Standards Instrument Serial Number Cal due date Tektronix USB Power Meter 11C940 May 14, 2015 Agilent Signal Generator MY45094463 Dec, 2015 Secondary Measurement Standards Network Analyzer Anritsu 37347C 002106 Feb. 20, 2015 Attestation The below named signatories have conducted the calibration and review of the data which is presented in this calibration report. Page 3 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Inc. Probe Summary Probe Type: E-Field Probe E020 Serial Number: 266 Frequency: As presented on page 5 Sensor Offset: 1.56 Sensor Length: 2.5 Tip Enclosure: Composite* Tip Diameter: < 2.9 mm Tip Length: 55 mm Total Length: 289 mm *Resistive to recommended tissue recipes per IEEE-1528 Sensitivity in Air Channel X: 1.2 μV/(V/m)2 Channel Y: 1.2 μV/(V/m)2 Channel Z: 1.2 μV/(V/m)2 Diode Compression Point: 95 mV Page 4 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Inc. Calibration for Tissue (Head H, Body B) Calibration Standard Tissue Measured Measured Frequency Conversion Frequency Uncertainty Type Epsilon Sigma Range Factor (%) (MHz) 450 H Head X X X X X 450 B Body X X X X X 700 H Head X X X X X 700 B Body 56.12 0.92 3.5 ±50 6.6 835 H Head X X X X X 835 B Body 55.35 1.00 3.5 ±50 6.8 900 H Head X X X X X 900 B Body 54.99 1.06 3.5 ±50 6.7 1450 H Head X X X X X 1450 B Body X X X X X 1500 H Head X X X X X 1500 B Body X X X X X 1640 H Head X X X X X 1640 B Body X X X X X 1750 H Head 1750 B Body 51.51 1.51 3.5 ±75 5.6 1800 H Head X X X X X 1800 B Body X X X X X 1900 H Head X X X X X 1900 B Body 53.35 1.45 3.5 ±75 5.4 2000 H Head X X X X X 2000 B Body 53.07 1.57 3.5 ±75 5.4 2100 H Head X X X X X 2100 B Body X X X X X 2300 H Head X X X X X 2300 B Body X X X X X 2450 H Head X X X X X 2450B Body 53.26 1.96 3.5 ±75 4.9 3000 H Head X X X X X 3000 B Body X X X X X 3600 H Head X X X X X 3600 B Body X X X X X 5250 H Head X X X X X 5250 B Body 47.54 5.23 3.5 ±100 3.3 5600 H Head X X X X X 5600 B Body 46.49 5.73 3.5 ±100 2.9 5800 H Head X X X X X 5800 B Body 45.99 6.10 3.5 ±100 3.4 Boundary Effect: Page 5 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Inc. Uncertainty resulting from the boundary effect is less than 2.1% for the distance between the tip of the probe and the tissue boundary, when less than 0.58mm. Spatial Resolution: The spatial resolution uncertainty is less than 1.5% for 4.9mm diameter probe. The spatial resolution uncertainty is less than 1.0% for 2.5mm diameter probe. DAQ-PAQ Contribution To minimize the uncertainty calculation all tissue sensitivity values were calculated using a load impedance of 5 M. Probe Calibration Uncertainty Uncertainty component Tolerance Probability distribution Divisor Standard (± %) uncertainty (± %) Incident or forward power 2.5 R √3 1.44 Reflected power 2 R √3 1.15 Liquid conductivity measurement 1 R √3 0.58 Liquid permittivity measurement 1 R √3 0.58 Liquid conductivity deviation 1.5 R √3 0.87 Liquid permittivity deviation 1.5 R √3 0.87 Frequency deviation 2.25 R √3 1.30 Field homogeneity 2.5 R √3 1.44 Field-probe positioning 2.5 R √3 1.44 Field-probe linearity 1.55 R √3 0.89 Combined standard uncertainty RSS 3.50 Page 6 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Inc. Receiving Pattern Air Re ceiving Pa tter n Probe E0 20 S/N 26 6 0 340 3501 .2 10 20 330 30 3 20 1 40 310 0 .8 50 300 0 .6 60 290 0 .4 70 280 0 .2 80 270 0 90 260 10 0 250 110 240 120 230 130 2 20 140 210 150 200 160 190 170 180 Ch1 Ch 2 C h3 Tot Page 7 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Inc. Isotropy Error Air Is otr opy Er r or P rob e S /N 26 6 10 9 8 7 6 5 4 3 ] 2 B d [ 1 r 0 o rr -1 E -2 -3 -4 -5 -6 -7 -8 -9 -10 0 10 0 20 0 30 0 Is otr opy Plot Pr obe S/N 2 6 6 0 .8 0 .7 0 .6 ) V 0 .5 (m e g 0 .4 lta o V 0 .3 0 .2 0 .1 0 0 10 0 20 0 300 Degrees (x10) Ch 1 Ch 2 Ch 3 Isotropicity Tissue: 0.10 dB Page 8 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Inc. Dynamic Range D yna mic R a nge Pr obe S/N 26 6 10000 1000 ] 100 V o rc i [m Unco mp ens ate d e 10 g Com pen sat ed ta l o V 1 0.1 0.01 1.00 10.00 100.00 1,000.00 10,000. 00 100, 000. 00 1,000,000. 00 10, 000,000.00 Electric Field [(V/m)^2] Page 9 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Inc. Video Bandwidth Probe Frequency Characteristics ) B ( 1 d l e v e l 0 t u p t u -1 o e b o r -2 P -3 -4 -5 -6 1 10 10 0 1000 100 00 Frequency (Hz) Video Bandwidth at 500 Hz 1 dB Video Bandwidth at 1.02 KHz: 3 dB Page 10 of 10 This page has been reviewed for content and attested to on Page 2 of this document.


Document Created: 2015-01-15 10:09:54
Document Modified: 2015-01-15 10:09:54
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC