Test Report

FCC ID: VX5265NC

Test Report

Download: PDF
FCCID_1030267

SGS-CSTC Standards Technical Services Ltd. No.198 Kezhu Road, Science Town Economic& Technology Development District Guangzhou, China 510663Telephone: Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: sgs_internet_operations@sgs.com Report No.: GLEMR080100047RFT FEDERAL COMMUNICATIONS COMMISSION Page: 1 of 15 Registration number: 282399 FCC ID:VX5265NC TEST REPORT Application No. : GLEMR080100047RF Applicant: THERMOR LTD FCC ID: VX5265NC Fundamental Carrier Frequency : 915MHz Equipment Under Test (EUT): Name: 915MHz WIRELESS TOUCH SCREEN HOME WEATHER STATION Model No.: 265NC, 265NU, 265BC, 265BU♣ ♣: Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Standards: FCC PART 15, SUBPART C: 2007 (Section 15.249) Date of Receipt: 4 January 2008 Date of Test: 11 January to 20 February 2008 Date of Issue: 26 February 2008 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 2 of this report for further details. Authorized Signature: Stephen Guo Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 2 of 15 FCC ID:VX5265NC 2 Test Summary Test Test Requirement Standard Paragraph Result Flied Strength of FCC PART 15 :2007 Section 15.249 (a) PASS Fundamental Flied Strength of Section 15.209& FCC PART 15 :2007 PASS* Unwanted Emissions Section 15.249 (d) Occupied Bandwidth FCC PART 15 :2007 Section 15.249 PASS Band Edges FCC PART 15 :2007 Section 15.249 (d) PASS Remark: Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. ♣: Model: 265NC, 265NU, 265BC, 265BU For only one model was tested, according to the confirmation from the applicant. Since the applicant declared electrical circuit design, layout, components used and internal wiring were identical for the above items, with only difference being the model no. *: The sample passed the test after modification, for more information please refer below information: This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 3 of 15 FCC ID:VX5265NC 3 Contents Page 1 COVER PAGE ...........................................................................................................................................1 2 TEST SUMMARY .................................................................................................................................................... 2 3 CONTENTS .............................................................................................................................................................. 3 4 GENERAL INFORMATION ................................................................................................................................... 4 4.1 CLIENT INFORMATION .......................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 4 4.3 DESCRIPTION OF SUPPORT UNITS ......................................................................................................................... 4 4.4 STANDARDS APPLICABLE FOR TESTING ............................................................................................................... 4 4.5 TEST LOCATION ................................................................................................................................................... 4 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 4 4.7 TEST FACILITY ..................................................................................................................................................... 5 5 EQUIPMENTS USED DURING TEST ................................................................................................................. 6 6 TEST RESULTS ...................................................................................................................................................... 7 6.1 E.U.T. OPERATION ............................................................................................................................................... 7 6.2 TEST PROCEDURE & MEASUREMENT DATA ......................................................................................................... 7 6.2.1 Test in transmitting mode ........................................................................................................................ 7 6.2.2 Occupied Bandwidth & Band Edge...................................................................................................... 11 7 PHOTOGRAPHS................................................................................................................................................... 13 7.1 RADIATED SPURIOUS EMISSION TEST SETUP ..................................................................................................... 13 7.2 EUT CONSTRUCTIONAL DETAILS .................................................................................................................13-15 This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 4 of 15 FCC ID:VX5265NC 4 General Information 4.1 Client Information Applicant: THERMOR LTD. Address of Applicant: 16975 Leslie Street, Newmarket, Ontario, L3Y 9A1, Canada 4.2 General Description of E.U.T. Name: 915MHz WIRELESS TOUCH SCREEN HOME WEATHER STATION Model No.: 265NC, 265NU, 265BC, 265BU Antenna Type Integral Power Supply: Battery 3.0V Function: The EUT is a wireless home weather station with wind sensor, rain sensor and so on, and the transmitter would send the weather information to the receiver indoor. 4.3 Description of Support Units The EUT has been tested independently. 4.4 Standards Applicable for Testing The customer requested FCC tests for the EUT. The standard used was FCC PART 15, SUBPART C: 2007 (Section 15.249); 4.5 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory, No.198 Kezhu Road, Science Town Economic& Technology Development District Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. 4.6 Other Information Requested by the Customer None. This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 5 of 15 FCC ID:VX5265NC 4.7 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • NVLAP – Lab Code: 200611-0 SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is recognized under the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0. • CNAS L0167 SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been assessed and in compliance with CNAS-CL01:2006 accreditation criteria for testing laboratories (identical to ISO/IEC 17025:2005 General Requirements) for the Competence of Testing Laboratories. • FCC – Registration No.: 282399 SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 282399, May 31, 2002. With the above and NVLAP’s accreditation, SGS-CSTC is an authorized test laboratory for the DoC process.  Industry Canada (IC) The 3m/10m Alternate Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620B-1. Date of Registration: Jan 15, 2007. Valid until Jan 15, 2009 This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 6 of 15 FCC ID:VX5265NC 5 Equipments Used during Test RE in Chamber/OATS Cal. Date Cal.Due date No: Test Equipment Manufacturer Model No. Serial No. (dd-mm-yy) (dd-mm-yy) Compact Semi- ChangZhou EMC0525 Anechoic Chamber N/A N/A N/A N/A ZhongYu EMC0522 EMI Test Receiver Rohde & Schwarz ESIB26 100249 28-01-2008 28-01-2009 N/A EMI Test Software Audix E3 N/A N/A N/A EMC0514 Coaxial cable SGS N/A N/A 04-12-2007 04-12-2008 EMC0524 Bi-log Type Antenna Schaffner -Chase CBL6112B 2966 12-08-2007 12-08-2008 EMC0519 Bilog Type Antenna Schaffner -Chase CBL6143 5070 12-08-2007 12-08-2008 EMC0517 Horn Antenna Rohde & Schwarz HF906 100095 12-08-2007 12-08-2008 EMC0040 Spectrum Analyzer Rohde & Schwarz FSP30 100324 05-12-2007 05-12-2008 0.1-1300 MHz 2944A0625 EMC0520 HP 8447D OPT 010 28-03-2007 28-03-2008 Pre-Amplifier 2 1-26.5 GHz 3008A0164 EMC0521 Pre-Amplifier Agilent 8449B 28-03-2007 28-03-2008 9 EMC0523 Active Loop Antenna EMCO 6502 00042963 09-08-2006 09-08-2008 10m Semi- Anechoic EMC0530 ETS N/A N/A 10-08-2007 10-08-2008 Chamber General used equipment Cal. Date Cal.Due date No: Test Equipment Manufacturer Model No. Serial No. (dd-mm-yy) (dd-mm-yy) EMC0050- Temperature, & ZHENGZHOU BO WSB N/A 05-12-2007 05-12-2008 EMC0053 Humidity YANG EMC0006 DMM Fluke 73 70681569 27-09-2007 27-09-2008 EMC0007 DMM Fluke 73 70671122 27-09-2007 27-09-2008 Conducted Emission Cal. Date Cal.Due date No: Test Equipment Manufacturer Model No. Serial No. (dd-mm-yy) (dd-mm-yy) 3 EMC0306 Shielding Room Zhong Yu 8 x 3 x 3.8 m N/A N/A N/A EMC0102 LISN Schaffner Chase MNZ050D/1 1421 14-12-2007 14-12-2008 EMC0118 Two-line v-netwok Rohde & Schwarz ENV216 100359 16-08--2007 16-08--2008 EMC0506 EMI Test Receiver Rohde & Schwarz ESCS30 100085 14-12-2007 14-12-2008 EMC0107 Coaxial Cable SGS 2m N/A 24-11-2007 26-11-2008 EMC0106 Voltage Probe SGS N/A N/A N/A N/A This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 7 of 15 FCC ID:VX5265NC 6 Test Results 6.1 E.U.T. Operation Input voltage: DC 3.0V Type of antenna: Integral Temperature: 20.0 -25.0 °C Humidity: 38-48 % RH Atmospheric Pressure: 992 -1016 mbar EUT Operation: Test the transmitter 915MHz carrier. 6.2 Test Procedure & Measurement Data 6.2.1 Test in transmitting mode Test Requirement: FCC Part15 C Section 15.249(a) & (d) Test Method: Based on FCC Part15 C Section 15.249 & ANSI C63.4: 2003 Test Date: 20 February 2008 Measurement Distance: 3m (Compact Semi-Anechoic Chamber). Frequency range 30 MHz – 25GHz for transmitting mode. Test instrumentation resolution bandwidth 120 kHz (30 MHz - 1000 MHz), 1 MHz (1000 M – 25GHz). Operation: Receive antenna scan height 1 - 4 m, polarization Vertical/ Horizontal, 0 a turntable rotate through 360 in the horizontal plane and it is used to support the test sample at 0.8m above the ground plane. Requirements: FCC Part 15.249(a) Fundamental Frequency Field Strength of Fundamental Field Strength of Harmonics (MHz) (dBµV/m @ 3m) (dBµV/m @ 3m) 902 to 928 94.0 54.0 FCC Part 15.249(d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. Remark: The fundamental frequency of the EUT is 915MHz. The limit for average field strength dBµV/m for the fundamental frequency = 94.0 dBµV/m. The limit for peak field strength dBµV/m for the fundamental frequency = 114.0 dBµV/m. No fundamental is allowed in the restricted bands. The limit for average field strength dBµV/m for the harmonics = 54.0 dBµV/m. The limit for peak field strength dBµV/m for the harmonics = 74.0 dBµV/m. Emission radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50dB below the level of the fundamental or 54.0 dBµV/m in 15.209. Here the limit for the other emission is 54.0 dBµV/m. Test Procedure: The procedure used was ANSI Standard C63.4-2003. The receiver was scanned from 30MHz to 25GHz.When an emission was found, the table was roated to produce the maximum signal This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 8 of 15 FCC ID:VX5265NC strength. An initial pre-scan was performed for in peak detection mode using the receiver. The EUT was measured for both the Horizontal and Vertical polarities and performed a pre-test three orthogonal planes two new AA batteries. For intentional radiators, measurements of the variation of the input power or the radiated signal level of the fundamental frequency component of the emission, as appropriate, shall be performed with the supply voltage varied between 85% and 115% of the nominal rated supply voltage. The worst case emissions were reported. Test Configuration: The field strength is calculated by adding the Antenna Factor, Cable Factor & preamplifier. The basic equation with a sample calculation is as follows: Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – preamplifier Factor The following test results were performed on the EUT: This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 9 of 15 FCC ID:VX5265NC Test in transmitting status- Vertical polarization Fundamental Carrier: Peak Peak Frequency Antenna Cable Preamp Reading Emission (MHz) factors(dB/m) loss(dB) factor(dB) Level Level Limit (dBµV) (dBµV/m) (dBµV/m) 915.000 21.55 3.90 24.93 86.2 86.7 114.0 Average Average Frequency Antenna Cable Preamp Emission Reading (MHz) factors(dB/m) loss(dB) factor(dB) Level Limit Level (dBµV) (dBµV/m) (dBµV/m) 915.000 21.55 3.90 24.93 84.2 84.7 94.0 Other emissions: 30MHz~1GHz Spurious Emissions ,Quasi-Peak Measurement Reading Emission Frequency Antenna Cable Preamp Level Level Limit (MHz) factors(dB/m) loss(dB) factor(dB) (dBµV) (dBµV/m) (dBµV/m) 448.070 16.40 1.58 25.46 25.7 18.2 46.0 1~25 GHz Harmonics & Spurious Emissions, Peak & Average Measurement Peak Measurement Reading Emission Frequency Antenna Cable Preamp Level Level Limit (MHz) factors(dB/m) loss(dB) factor(dB) (dBµV) (dBµV/m) (dBµV/m) 1830.000 26.77 3.97 35.15 59.26 54.85 74.0 2745.000 29.51 4.90 34.55 60.80 60.67 74.0 3660.000 29.60 4.95 35.05 61.00 60.50 74.0 Average Measurement Reading Emission Frequency Antenna Cable Preamp Level Level Limit (MHz) factors(dB/m) loss(dB) factor(dB) (dBµV) (dBµV/m) (dBµV/m) 1830.000 26.77 3.97 35.15 41.69 37.28 54.0 2745.000 29.51 4.90 34.55 42.60 42.46 54.0 3660.000 29.60 4.95 35.05 41.00 40.50 54.0 This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 10 of 15 FCC ID:VX5265NC Test in transmitting status- Horizontal polarization Fundamental Carrier: Peak Peak Frequency Antenna Cable Preamp Reading Emission (MHz) factors(dB/m) loss(dB) factor(dB) Level Level Limit (dBµV) (dBµV/m) (dBµV/m) 915.000 21.55 3.90 24.93 84.2 84.7 114.0 Average Average Frequency Antenna Cable Preamp Emission Reading (MHz) factors(dB/m) loss(dB) factor(dB) Level Limit Level (dBµV) (dBµV/m) (dBµV/m) 915.000 21.55 3.90 24.93 82.2 82.7 94.0 Other emissions: 30MHz~1GHz Spurious Emissions ,Quasi-Peak Measurement Emission Emission Frequency Antenna Cable Preamp Reading Level Limit (MHz) factors(dB/m) loss(dB) factor(dB) (dBµV) (dBµV/m) (dBµV/m) 448.070 16.40 1.58 25.46 25.3 17.8 46.0 1~25 GHz Harmonics & Spurious Emissions, Peak & Average Measurement Peak Measurement Emission Emission Frequency Antenna Cable Preamp Reading Level Limit (MHz) factors(dB/m) loss(dB) factor(dB) (dBµV) (dBµV/m) (dBµV/m) 1830.000 26.77 3.97 35.15 61.69 57.28 74.0 2745.000 29.51 4.90 34.55 52.60 52.46 74.0 3660.000 29.60 4.95 35.05 51.00 50.50 74.0 Average Measurement Antenna Emission Emission Frequency Cable Preamp factors(dB/ Reading Level Limit (MHz) loss(dB) factor(dB) m) (dBµV) (dBµV/m) (dBµV/m) 1830.000 26.77 3.97 35.15 41.00 36.60 54.0 2745.000 29.51 4.90 34.55 42.30 42.16 54.0 3660.000 29.60 4.95 35.05 43.10 42.60 54.0 Remark: No other radiation has been found. TEST RESULTS: The unit does meet the FCC requirements. This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 11 of 15 FCC ID:VX5265NC 6.2.2 Occupied Bandwidth & Band Edge Test Requirement: FCC Part 15 Section 15.249 Test Method: ANSI C63.4: 2003 Operation within the band 902 - 928MHz Test Date: 16 January 2008 Requirements: 15.249 (d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. Method of A small sample of the transmitter output was fed into the Spectrum measurement: Analyzer and the attached plot was taken. Occupied Bandwidth: Test result: Test Channel Bandwidth 915MHz 30kHz Refer plots: This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 12 of 15 FCC ID:VX5265NC Band edge: The Lower Edge 902MHz: the value is attenuated 37.1dB, level less than the limit; The Upper Edge 928MHz: the value is attenuated 38.3dB, level less than the limit TEST RESULTS: The unit does meet the FCC requirements. This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 13 of 15 FCC ID:VX5265NC 7 Photographs 7.1 Radiated Spurious Emission Test Setup 7.2 EUT Constructional Details This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 14 of 15 FCC ID:VX5265NC This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR080100047RFT Page: 15 of 15 FCC ID:VX5265NC This document is issued by the Company under its Gene ral Conditions of Service printed overleaf or available on reque st and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.


Document Created: 2008-09-12 15:40:49
Document Modified: 2008-09-12 15:40:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC