VPYLXRF052

FCC ID

Equipment: UHF RFID Reader/Writer

Murata Manufacturing Co., Ltd. LXRF052

10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto, N/A 617-8555 Japan

Application
Frequency Range
Final Action Date
Granted
kEn7DK+CdnnyjFlWV00Gxg==
902.75-927.25
2019-02-03
APPROVED
kEn7DK+CdnnyjFlWV00Gxg==
917.1-926.9
2019-02-03
APPROVED
File NameDocument TypeDateDirect
03 FCC Test Setup Photo_DSSTest Setup Photos 2019-02-03 00:00:00 pdf
03 FCC Test Report_DSSTest Report 2019-02-03 00:00:00 pdf
06 Label and LocationID Label/Location Info 2019-02-03 00:00:00 pdf
05 User ManualUsers Manual 2019-02-03 00:00:00 pdf
04 Internal PhotoInternal Photos 2019-02-03 00:00:00 pdf
04 External PhotoExternal Photos 2019-02-03 00:00:00 pdf
03 FCC RF Exposure_DSSRF Exposure Info 2019-02-03 00:00:00 pdf
02 FCC Request for Confidentiality LetterCover Letter(s) 2019-02-03 00:00:00 pdf
02 FCC MA Letter_unlicensedCover Letter(s) 2019-02-03 00:00:00 pdf
02 FCC Declaration of Professional InstallationCover Letter(s) 2019-02-03 00:00:00 pdf
02 FCC Authorization LetterCover Letter(s) 2019-02-03 00:00:00 pdf
09 Confidential_SchematicsSchematics N/A
10 Confidential_Parts ListParts List/Tune Up Info N/A
07 Confidential_Block DiagramBlock Diagram N/A
08 Confidential_Theory of Operation-HoppingOperational Description N/A
08 Confidential_Theory of Operation-Dwell timeOperational Description N/A
08 Confidential_Theory of Operation-Specification 1Operational Description N/A
08 Confidential_Theory of Operation-Specification 2Operational Description N/A
08 Confidential_Theory of Operation-Antenna Specification 1Operational Description N/A
08 Confidential_Theory of Operation-Antenna Specification 2Operational Description N/A
08 Confidential_Theory of Operation-Interface SpecificationOperational Description N/A

Application Details:

EquipmentUHF RFID Reader/Writer
FRN0017033432
Grantee CodeVPY
Product CodeLXRF052
Applicant BusinessMurata Manufacturing Co., Ltd.
Business Address10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto,N/A Japan 617-8555
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMOTOO HAYASHI – GENERAL MANAGER
Applicant Phone
Applicant Fax81-75-955-6634
Applicant Email[email protected]
Applicant MailStop
Test FirmUL Japan, Inc.
Test Firm ContactTsuyoshi Katsuda
Test Firm Phone
Test Firm Fax81-596-24-8124
Test Firm Email[email protected]
Certified ByYoshihisa Maeda – Project Engineer
Comment [kEn7DK+CdnnyjFlWV00Gxg==]: Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC