Test Report

FCC ID: VLJ-MBP33SPU

Test Report

Download: PDF
FCCID_2315580

TEST REPORT Date: 2014-06-30 Report No.: 60.870.14.012.02F Applicant: Binatone Electronics International Ltd. Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong Description of Samples: Model name: Digital Video Baby Monitor (Parent Unit) Brand name: motorola Model no.: MBP33SPU FCCID: VLJ-MBP33SPU Date Samples Received: 2014-06-01 Date Tested: 2014-06-02 to 2014-06-30 Investigation Requested: FCC Part 15 Subpart C, Section 15.247 Conclusions: The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks: --- Checked by: Approved by:- Ray Cheung Jeff Pong Project Engineer Manager Wireless & Telecom Department Wireless & Telecom Department Page 1 of 29 TUV SUD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F CONTENT: Cover Page 1 of 29 Content Page 2-3 of 29 1.0 General Details 1.1 Test Laboratory Page 4 of 29 1.2 Applicant Details Page 4 of 29 1.3 Equipment Under Test [EUT] Page 5 of 29 1.4 Related Submittal(s) Grants Page 5 of 29 2.0 Technical Details 2.1 Investigations Requested Page 6 of 29 2.2 Test Standards and Results Summary Page 6 of 29 3.0 Test Methodology 3.1 Radiated Emission Page 7 of 29 3.2 Field Strength Calculation Page 7 of 29 3.3 Conducted Emission Page 7 of 29 4.0 Test Results 4.1 Number of Frequency Hopping Page 8 of 29 4.2 20dB Bandwidth Measurement Page 9-10 of 29 4.3 Hopping Channel Carrier Frequency Separation Page 11 of 29 4.4 Average Time of Occupancy Page 12-14 of 29 4.5 Pseudorandom Hopping Algorithm Page 15 of 29 4.6 Band Edge Measurement Page 16-17 of 29 4.7 Maximum Output Power Page 18-20 of 29 4.8 Out of Band Emissions and Emissions in Restricted Bands Page 21-25 of 29 4.9 Conducted Emission on AC Mains Page 26-28 of 29 Page 2 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 5.0 List of Measurement Equipments Page 29 of 29 Appendix A Photos of Test Setup Appendix B External EUT Photos Appendix C Internal EUT Photos Page 3 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 1.0 General Details 1.1 Test Laboratory Attestation of Global Compliance SZ Co Ltd. 2/F, Building 2,No.1-No.4,Chaxi Sanwei, Technical Industrial Park, Gushu, Xixiang, Shenzhen, China. Registration Number: 259865 Tested by: John Zhi 1.2 Applicant Details Applicant Binatone Electronics International Ltd. Floor 23A, 9 Des Voeux Road West, Sheung Wan Hong Kong Manufacturer VTech (Dongguan) Telecommunication Limited VTEch Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan, Guangdong, China Page 4 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 1.3 Equipment Under Test [EUT] Description of EUT Product Description: Digital Video Baby Monitor (Parent Unit) Model No.: MBP33SPU Brand Name: motorola FCCID: VLJ-MBP33SPU Rating: DC 5.0V, 600mA powered by AC/DC power adaptor Or DC 3.6V 900mAh (Ni-MH package rechargeable battery) Operated Frequency: 2402– 2479 MHz No. of Operated Channel: 23 Accessories and Auxiliary Equipments: AC/DC Switching Adaptor Antenna Type: Integral Manufacture of Antenna: CVISION HK LTD Antenna Gain: 1 dBi Antenna Model: N/A General Operation of EUT The Equipment Under Test (EUT) is a Monitor of Wireless Monitoring System. FHSS Operation Principle: This module is controlled by microchip to generate Pseudorandom Frequency Hopping Sequence, this module support 23 hopping channels. Refer to section 4.5 of this report to have more detail of Pseudorandom Hopping Algorithm. 1.4 Related Submittal(s) Grants This is a signal application subjected to Certificate Authorization. Page 5 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 2.0 Technical Details 2.1 Investigations Requested Perform ElectroMagnetic Interference measurement in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15:2012 and ANSI C63.4: 2009 2.2 Test Standards and Results Summary Tables Test Condition Test Requirement Test Result Pass N/A Number of Frequency Section 15.247 ( a1 ) Hopping 20dB Bandwidth Section 15.247 ( a1 ) Measurement Hopping Channel Carrier Section 15.247 ( a1 ) Frequency Separation Average Time of Section 15.247 ( a1 ) Occupancy Pseudorandom Hopping Section 15.247 ( a1 ) Algorithm Band Edge Measurement Section 15.247 Maximum Output Power Section 15.247 ( b1 ) Out of Band Emission Section 15.247 ( d ) Radiated Emission in Section 15.247 ( d ) Restricted Band Conducted Emission on AC Section 15.207 Mains Antenna Requirement Section 15.203 See note 1 Note 1 : The EUT uses a permanently attached antenna, which in accordance to Section 15.203, is considered sufficient to comply with the provisions of this section. Remark: N/A - Not Applicable Page 6 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 3.0 Test Methodology 3.1 Radiated Emission The sample was placed 0.8m above the ground plane on a standard emission test site *. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. 3.2 Field Strength Calculation The field strength at 3 m was established by adding the meter reading of the spectrum analyzer to the factors associated with antenna correction factor, cable loss, preamplifiers and filter attenuation. The equation is expressed as follow: FS = R + System Factor System Factor = AF + CF + FA – PA Where FS = Net Field Strength in dBuV/m at 3 meters. R = Reading of Spectrum Analyzer / Test Receiver in dBuV. AF = Antenna Factor in dB. CF = Cable Attenuation Factor in dB. FA = Filter Attenuation Factor in dB. PA = Preamplifier Factor in dB. FA and PA are only be used for the measuring frequency above 1 GHz. 3.3 Conducted Emissions The test was performed in accordance with ANSI C63.4: 2009, with the following: initial measurements were performed in peak and average detection modes on the live line of personal computer, any emissions recorded within 30dB of the relevant limit lines were re-measured using quasi-peak and average detection on the live and neutral lines with the worst case recorded in the table of results. Page 7 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 4.0 Test Results 4.1 Number of Hopping Frequency Test Requirement: FCC part 15 section 15.247 (a1)(iii) Test Date: 2014-06-15 Mode of Operation: Transmitting mode. Detector Function: Max Hold Result: PASS Measured Result : Operating Channel Frequency in sequence (MHz): Channels list CH1=2402MHz CH2=2404MHz CH3=2406MHz CH4=2408MHz CH5=2410MHz CH6=2415MHz CH7=2420MHz CH8=2425MHz CH9=2430MHz CH10=2435MHz CH11=2440MHz CH12=2445MHz CH13=2450MHz CH14=2455MHz CH15=2460MHz CH16=2465MHz CH17=2467MHz CH18=2469MHz CH19=2471MHz CH20=2473MHz CH21=2475MHz CH22=2477MHz CH23=2479MHz Limit for Number of Hopping Channel [ Section 15.247 (a1)(iii) ] At least 15 non-overlapping channels of each sequence for 2400-2483.5MHz. Result data graph shows the number of operation channels: Page 8 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 4.2 20dB Bandwidth Measurement Test Requirement: FCC part 15 section 15.247 (a1) Test Date: 2014-06-15 Mode of Operation: Transmitting mode. Detector Function: Max Hold Test Setup: The bandwidth is measured at an amplitude level reduced from the reference level by a specified ratio. The reference level is the level of the highest amplitude signal observed from the transmitter at the fundamental frequency. Once the reference level is established, the equipment is conditioned with typical modulating signal to produce the worst-case (i.e. the widest) bandwidth. Channel Measured frequency 20dB Bandwidth (MHz) (MHz) Lowest 2402 2.062 Middle 2440 2.030 Highest 2479 2.176 This result is used for checking the hopping channel carrier frequencies separation. Result data graph shows 20 dB bandwidth, CF = 2402MHz, BW = 2.062MHz Page 9 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result data graph shows 20 dB bandwidth, CF = 2440MHz, BW = 2.030MHz Result data graph shows 20 dB bandwidth, CF = 2479MHz, BW = 2.176MHz Page 10 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 4.3 Hopping Channel Carrier Frequency Separation Test Requirement: FCC part 15 section 15.247 (a1) Test Date: 2014-06-15 Mode of Operation: Transmitting mode. Detector Function: Max Hold Result: PASS Measured Result : Refer to the delta marker, the frequency separation between two adjacent channels is 2 MHz, therefore, the requirement of channel separated by a minimum of 25kHz of the hopping channel is applied. Limits for Hopping Channel Separation [ Section 15.247 (a1) ]: Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25kHz or the 20dB bandwidth of the hopping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.5MHz band may have hopping channel carrier frequencies that are separated by 25KHz or two-thirds of the 20dB bandwidth of the hopping channel, whichever is greater. Result data graph shows the channel separation: Page 11 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 4.4 Average Time of Channel Occupancy Test Requirement: FCC part 15 section 15.247 (a1)(iii) Test Date: 2014-06-15 Mode of Operation: Transmitting mode. Detector Function: Zero span, Sweep time 1s Result : PASS Measured Result : Each transmission only 23 channels will be used. Observe time = 23 channels × 0.4s = 9.2s There are 4 pulses within 300ms And one set of pulses = 165.7us Therefore, the average channel occupancy times (ms) = 165.7us x 4 x 9.2s/300ms So, total transmitting time is 0.020s. (<0.4s). Limits for Average Time of Occupancy [ Section 15.247 (a1)(iii) ]: The average time of occupancy on any channel shall not be greater than 0.4 second within a period of 0.4 seconds multiplied by the number of hopping channels employed. Page 12 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result data graph shows total 23 channels are used. Result data graph shows total 4 pulses with 300ms. Page 13 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result data graph zooms into detail, one pulse period is 165.7us. Page 14 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 4.5 Pseudorandom Hopping Algorithm Pseudorandom Frequency Hopping MBP33SPU uses FHSS technology the frequency range of the system is operating from 2402MHz to 2479MHz. There are totally 23 channels with 2MHz (the worst) channel separation. A single data frame is transmitted on each frequency location before skipping to the next hopping frequency in the list. Channels list CH1=2402MHz CH2=2404MHz CH3=2406MHz CH4=2408MHz CH5=2410MHz CH6=2415MHz CH7=2420MHz CH8=2425MHz CH9=2430MHz CH10=2435MHz CH11=2440MHz CH12=2445MHz CH13=2450MHz CH14=2455MHz CH15=2460MHz CH16=2465MHz CH17=2467MHz CH18=2469MHz CH19=2471MHz CH20=2473MHz CH21=2475MHz CH22=2477MHz CH23=2479MHz Requirement for Pseudorandom Hopping Algorithm [ Section 15.247 (a1) ]: The channel frequencies shall be selected from a pseudorandom ordered list of hopping frequencies. Each frequency must be used equally on average by the transmitter. Page 15 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 4.6 Band Edge Measurement Test Requirement: FCC part 15 section 15.247 Test Date: 2014-06-15 Mode of Operation: Transmitting mode. Detector Function: Max Hold Result: PASS Measured Result : Refer to the figure, it shows the frequency of lower band edge and upper band edge separately. Limits of Band Edge for Carrier Frequencies Operated within the Bands [ Section 15.247 ]: The carrier frequencies should operate within 2400-2483.5MHz. Result data graph shows the frequency of lowest channel. Page 16 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result data graph shows the frequency of highest channel. Page 17 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 4.7 Maximum Output Power Test Requirement: FCC part 15 section 15.247 (a1) Test Method: ANSI C63.4:2009 Test Date: 2014-06-15 Mode of Operation: Transmitting mode. Detector Function: Peak Measurement BW: RBW 1MHz ; VBW 1MHz Test Setup: Result : PASS Frequency Peak Output Power Limit (MHz) (dBm) (W) (dBm) (W) Lowest Channel : 17.71 0.059 21 0.125 2402 Middle Channel : 17.59 0.057 21 0.125 2440 Highest Channel : 17.38 0.055 21 0.125 2479 Limits for Maximum Output Power [ Section 15.247 (a1)(iii) ]: For frequency hopping systems employing at least 75 hopping channels: 1 Watt For all other frequency hopping systems in the 2400-2483.5 MHz band: 0.125 Watts Page 18 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result data graph shows the frequency of lowest channel Result data graph shows the frequency of middle channel Page 19 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result data graph shows the frequency of highest channel Page 20 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 4.8 Out of Band Emissions and Emissions in Restricted Bands Test Requirement: FCC part 15 section 15.247 (d ) Test Method: ANSI C63.4:2009 Test Date: 2014-06-15 Mode of Operation: Transmitting mode. Detector Function: Peak Measurement BW: RBW 100KHz ; VBW 300KHz Test Setup: Semi-Anechoic Chamber Computer 3m Pre-Amplifier EUT Turntable Ground Plane Measuring Receiver Page 21 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result : PASS Out of Frequency Band Emissions: For out of band emissions that are close to or exceed 20dB attenuation requirement, and emission falls into restricted band, radiated emission was performed in order to show compliance with the general radiated emission requirement. Result Summary: Refer to the emission data graph, result shows that the significant emissions detected are with more than 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power. Limits for Out of Frequency Band Emission [ Section 15.247 (d) ]: In any 100kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power. Attenuation below the general limits specified in Section 15.209(a) is not required. Limit for Radiated Emission Falling in Restricted Bands [ Section 15.209 ]: Field Strength Field Strength Frequency (MHz) [ V/m] [dB V/m] 30-88 100 40.0 88-216 150 43.5 216-960 200 46.0 Above 960 500 54.0 Radiated emissions, which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section 15.209. The emission limits shown in the above table are based on measurement employing a CISPR quasi-peak detector and above 1000MHz are based on measurements employing an average detector. Page 22 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result : PASS All Emission and Emissions Fall into Restricted Band were recorded as below: Radiated Emissions Emissions E-Field Reading System Field Limit Delta to Frequency Polarity Factor strength at Limit 3m MHz dBuV/m dB dBuV/m dBuV/m dBuV/m Lowest Channel PK 4800.00 V 47.10 8.50 55.60 74.00 -18.40 PK 4800.00 H 50.60 8.50 59.10 74.00 -14.90 Middle Channel PK 4875.00 V 48.10 8.80 56.90 74.00 -17.10 PK 4875.00 H 50.00 8.80 58.80 74.00 -15.20 Highest Channel PK 4962.50 V 53.30 9.10 62.40 74.00 -11.60 PK 4962.50 H 54.50 9.10 63.60 74.00 -10.40 Spurious Emissions QP 37.76 V 14.60 21.20 35.80 40.00 -4.20 QP 68.80 V 15.90 10.50 26.40 40.00 -13.60 QP 103.70 V 16.90 11.30 28.20 43.50 -15.30 QP 134.76 V 18.50 14.60 33.10 43.50 -10.40 QP 161.92 V 22.90 15.00 37.90 43.50 -5.60 QP 191.02 V 19.90 12.80 32.70 43.50 -10.80 QP 37.76 H 8.60 21.20 29.80 40.00 -10.20 QP 107.60 H 16.50 11.30 27.80 43.50 -15.70 QP 161.92 H 16.10 15.00 31.10 43.50 -12.40 QP 288.02 H 18.00 15.60 33.60 46.00 -12.40 QP 383.08 H 14.90 18.30 33.20 46.00 -12.80 QP 480.08 H 14.90 20.20 35.10 46.00 -10.90 Refer to Figures shows the worst case channel’s emission data graph from 30MHz-26GHz. Page 23 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result Summary: 1) Communication mode: All other emissions are more than 20dB below FCC part 15.209 limit. 2) No further spurious emissions found between 30 MHz and lowest internal used/generated frequency and from 30MHz to 1GHz. Remarks: 1. “ * ” Radiated emissions which fall in the restricted bands as defined in Section 15.205(a). 2. Emission level with more than 20dB below the FCC required limit is not mentioned in table. 3. Delta to Limit = Field strength (dBµV/m) – Limit (dBµV/m). 4. Calculated measurement uncertainty: 9kHz -30MHz: 1.8dB. 30MHz -1GHz: 5.2dB. 1GHz -18GHz: 5.1dB. Page 24 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Radiated emission data graph (Vertical polarization, 30MHz-1GHz) Remark: Only background noise was measured from 1GHz-26GHz excluding the operation frequency relational. Radiated emission data graph (Horizontal polarization, 30MHz-1GHz) Remark: Only background noise was measured from 1GHz-26GHz excluding the operation frequency relational. Page 25 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 4.9 Conducted Emissions (0.15MHz to 30MHz) Test Requirement: FCC part 15 Section 15.207 Class B Test Method: ANSI C63.4:2009 Test Date: 2014-06-15 Mode of Operation: -Transmitting mode Detector Function: CISPR Quasi Peak Measurement BW: 100 kHz Worst Case Channel: 1 Test Setup: Results: PASS - Refer Figures and tables for the result. Limits for Conducted Emission [ Section 15.207]: Frequency Range Quasi-Peak Limit Average Limit [MHz] [dB V] [dB V] 0.15-0.5 66 to 56* 56 to 46* 0.5-5.0 56 46 5.0-30.0 60 50 * Decreases with the logarithm of the frequency. Remarks: Calculated measurement uncertainty: 2.8dB Page 26 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result data graph shows the conducted emission (Live). Refer to the following table for the result details: Conducted Emission Frequency Detector Phase Result Limit Margin (MHz) (QP/AV) (dBµV) (dBµV) 0.150 QP L 44.30 80.00 -35.70 0.158 QP L 46.10 66.00 -19.90 0.174 QP L 45.20 65.00 -19.80 0.202 QP L 40.90 64.00 -23.10 0.534 QP L 34.50 56.00 -21.50 2.854 QP L 30.20 56.00 -25.80 Page 27 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F Result data graph shows the conducted emission (Neutral). Refer to the following table for the result details: Conducted Emission Frequency Detector Phase Result Limit Margin (MHz) (QP/AV) (dBµV) (dBµV) 0.158 QP N 48.60 66.00 -17.40 0.194 QP N 44.50 64.00 -19.50 0.210 QP N 43.40 63.00 -19.60 0.262 QP N 39.10 61.00 -21.90 0.278 QP N 40.30 61.00 -20.70 3.182 QP N 26.30 56.00 -29.70 Page 28 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong

Report No.: 60.870.14.012.02F 5.0 List of Measurement Equipment Radiated Emission and Bandwidth Emissions Description Manufacturer Model no. Serial no. CAL due 3m Semi- Anechoic 9.0(L)*6.0(W)* N/A N/A Jul. 16 2014 Chamber 6.0(H) Agilent Spectrum Analyzer E4440A US41421290 Jul. 16 2014 R&S EMI Test Receiver ESCI 100694 Jul. 16 2014 A.H. Wideband Antenna SAS-521-4 26 Jul. 16 2014 EMCO Antenna 3142C 60447 Jul. 16 2014 EM Horn Antenna EM-AH-10180 67 Jul. 16 2014 EM Power Amplifier EM30180 0607030 Jul. 16 2014 MF Position Controller MF-7802 MF780208138 N/A Conducted Emissions Description Manufacturer Model no. Serial no. CAL due N/A Shielding Room 7.(L)x4(W)x3(H) N/A Jul. 16 2014 R&S EMI Test Receiver ESCI 100694 Jul. 16 2014 R&S LISN ESH3-Z5 8389791009 Jul. 16 2014 N/A Not Applicable or Not Available Page 29 of 29 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Shatin, Hong Kong


Document Created: 2014-07-02 19:26:43
Document Modified: 2014-07-02 19:26:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC